Bosch Rexroth IndraDyn S - MKE Project Planning Manual

44/131 Bosch Rexroth AG | Electric Drivesand ControlsRexroth MKE Synchronous Motors | Project Planning ManualSpecificationsStub shaftFig.5-7:Stub shaft MKE047● Stub shaft cylindrical according to DIN 748, Part 3, ed. 07.75. IEC 60072(1971).●DS M5 centering hole according to DIN 332, Part 2, ed. 05.83, max. tighteningtorque for screw 3.0 Nm.● Vibration severity grade N according to DIN VDE 0530, Part 14, ed. 02.93.Motor design ● Motor design B5 according to EN 60034-7 / 1993 for all installation positions.Flange ● Flange according to DIN 42948, ed. 11.65.●Positional accuracy with regard to true running, axial running and coaxialityto the shaft according to DIN 42955 Tolerance Class N, ed. 12.81Output shaft ● Plain shaft (preferred type)- or -● Shaft with keyway according to DIN 6885, Sheet 1, ed. 08.68.Caution! Balanced with key!Fig.5-8:Output shaft with keyway MKE047Related key: DIN 6885-A 5 x 5 x 20; not included in the scope ofdelivery of the motor.OptionsFor options, refer to the chapter entitled "Type code – order designation".