Bosch Rexroth IndraDyn S - MKE Project Planning Manual

Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drivesand Controls| Bosch Rexroth AG 41/131SpecificationsStub shaftFig.5-3:Stub shaft MKE037● Stub shaft cylindrical according to DIN 748, Part 3, ed. 07.75. IEC 60072(1971).●DS M3 centering hole according to DIN 332, Part 2, ed. 05.83, max. tighteningtorque for screw 0.7 Nm.● Vibration severity grade N according to DIN VDE 0530, Part 14, ed. 02.93.Motor design ● Motor design B5 according to EN 60034-7 / 1993 for all installation positions.Flange ● Flange according to DIN 42948, ed. 11.65.●Positional accuracy with regard to true running, axial running and coaxialityto the shaft according to DIN 42955 Tolerance Class N, ed. 12.81Output shaft ● Plain shaft (preferred type)- or -● Shaft with keyway according to DIN 6885, Sheet 1, ed. 08.68.Caution! Balanced with key!Fig.5-4:Output shaft with keyway MKE037Related key: DIN 6885-A 3 x 3 x 16; not included in the scope ofdelivery of the motor.OptionsFor options, refer to the chapter entitled "Type code / order designation".