Bosch Rexroth IndraDyn S - MKE Project Planning Manual

More documents

Recommendations

Info

14/131 Bosch Rexroth AG | Electric Drivesand ControlsRexroth MKE Synchronous Motors | Project Planning ManualSafety Instructions for Electric Drives and ControlsUser●●to be trained or instructed to maintain and use adequate safety equipment,to attend a course of instruction in first aid.A person installing, commissioning or using a product which has been placedon the market.3.2 General Information3.2.1 Using the Safety Instructions and Passing Them on to OthersDo not attempt to install and operate the electric components of the drive andcontrol system without first reading all documentation provided with the product.Read and understand these safety instructions and all user documentation priorto working with these components. If you do not have the user documentationfor the components, contact your responsible Bosch Rexroth sales partner. Askfor these documents to be sent immediately to the person or persons responsiblefor the safe operation of the components.If the component is resold, rented and/or passed on to others in any other form,these safety instructions must be delivered with the component in the officiallanguage of the user's country.WARNINGImproper use of these components, failure to follow the safety instructionsin this document or tampering with the product, including disablingof safety devices, could result in property damage, injury, electric shockor even death.Observe the safety instructions!3.2.2 Requirements for Safe UseRead the following instructions before initial commissioning of the electric componentsof the drive and control system in order to eliminate the risk of injuryand/or property damage. You must follow these safety instructions.●●●●●●●●●Bosch Rexroth is not liable for damages resulting from failure to observethe safety instructions.Read the operating, maintenance and safety instructions in your languagebefore commissioning. If you find that you cannot completely understandthe application documentation in the available language, please ask yoursupplier to clarify.Proper and correct transport, storage, mounting and installation, as wellas care in operation and maintenance, are prerequisites for optimal andsafe operation of the component.Only qualified persons may work with components of the drive and controlsystem or within its proximity.Only use accessories and spare parts approved by Bosch Rexroth.Follow the safety regulations and requirements of the country in which theelectric components of the drive and control system are operated.Only use the components of the drive and control system in the mannerthat is defined as appropriate. See chapter "Appropriate Use".The ambient and operating conditions given in the application documentationat hand must be observed.Safety-relevant applications are only allowed if clearly and explicitly specifiedin the application documentation "Integrated Safety Technology". If
Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drivesand Controls| Bosch Rexroth AG 15/131Safety Instructions for Electric Drives and Controls●●●●●this is not the case, they are excluded. Safety-relevant are all such applicationswhich can cause danger to persons and property damage.The information given in the application documentation with regard to theuse of the delivered components contains only examples of applicationsand suggestions.The machine and installation manufacturer must– make sure that the delivered components are suited for his individualapplication and check the information given in this application documentationwith regard to the use of the components,– make sure that his individual application complies with the applicablesafety regulations and standards and carry out the required measures,modifications and complements.Commissioning of the delivered components is only allowed once it is surethat the machine or installation in which the components are installedcomplies with the national regulations, safety specifications and standardsof the application.Operation is only allowed if the national EMC regulations for the applicationare met.The instructions for installation in accordance with EMC requirements canbe found in the section on EMC in the respective application documentation.The machine or installation manufacturer is responsible for compliancewith the limit values as prescribed in the national regulations.The technical data, connection and installation conditions of the componentsare specified in the respective application documentations and mustbe followed at all times.National regulations which the user must take into account●●●●European countries: According to European EN standardsUnited States of America (USA):– National Electrical Code (NEC)– National Electrical Manufacturers Association (NEMA), as well aslocal engineering regulations– Regulations of the National Fire Protection Association (NFPA)Canada: Canadian Standards Association (CSA)Other countries:– International Organization for Standardization (ISO)– International Electrotechnical Commission (IEC)3.2.3 Hazards by Improper Use●●●●●High electrical voltage and high working current! Danger to life or seriousinjury by electric shock!High electrical voltage by incorrect connection! Danger to life or injury byelectric shock!Dangerous movements! Danger to life, serious injury or property damageby unintended motor movements!Health hazard for persons with heart pacemakers, metal implants andhearing aids in proximity to electric drive systems!Risk of burns by hot housing surfaces!
Page 1: Electric DrivesLinear Motion andand
Page 4 and 5: II/VIBosch Rexroth AG | Electric Dr
Page 6 and 7: IV/VIBosch Rexroth AG | Electric Dr
Page 8 and 9: VI/VIBosch Rexroth AG | Electric Dr
Page 10 and 11: 8/131 Bosch Rexroth AG | Electric D
Page 12 and 13: 10/131 Bosch Rexroth AG | Electric
Page 26: 24/131 Bosch Rexroth AG | Electric
Page 29 and 30: Project Planning Manual | Rexroth M
Page 67 and 68:
Project Planning Manual | Rexroth M
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
show all

Bosch Rexroth IndraDyn S - MKE Project Planning Manual

Create successful ePaper yourself

Delete template?

Save as template?