Bosch Rexroth IndraDyn S - MKE Project Planning Manual

14/131 Bosch Rexroth AG | Electric Drivesand ControlsRexroth MKE Synchronous Motors | Project Planning ManualSafety Instructions for Electric Drives and ControlsUser●●to be trained or instructed to maintain and use adequate safety equipment,to attend a course of instruction in first aid.A person installing, commissioning or using a product which has been placedon the market.3.2 General Information3.2.1 Using the Safety Instructions and Passing Them on to OthersDo not attempt to install and operate the electric components of the drive andcontrol system without first reading all documentation provided with the product.Read and understand these safety instructions and all user documentation priorto working with these components. If you do not have the user documentationfor the components, contact your responsible Bosch Rexroth sales partner. Askfor these documents to be sent immediately to the person or persons responsiblefor the safe operation of the components.If the component is resold, rented and/or passed on to others in any other form,these safety instructions must be delivered with the component in the officiallanguage of the user's country.WARNINGImproper use of these components, failure to follow the safety instructionsin this document or tampering with the product, including disablingof safety devices, could result in property damage, injury, electric shockor even death.Observe the safety instructions!3.2.2 Requirements for Safe UseRead the following instructions before initial commissioning of the electric componentsof the drive and control system in order to eliminate the risk of injuryand/or property damage. You must follow these safety instructions.●●●●●●●●●Bosch Rexroth is not liable for damages resulting from failure to observethe safety instructions.Read the operating, maintenance and safety instructions in your languagebefore commissioning. If you find that you cannot completely understandthe application documentation in the available language, please ask yoursupplier to clarify.Proper and correct transport, storage, mounting and installation, as wellas care in operation and maintenance, are prerequisites for optimal andsafe operation of the component.Only qualified persons may work with components of the drive and controlsystem or within its proximity.Only use accessories and spare parts approved by Bosch Rexroth.Follow the safety regulations and requirements of the country in which theelectric components of the drive and control system are operated.Only use the components of the drive and control system in the mannerthat is defined as appropriate. See chapter "Appropriate Use".The ambient and operating conditions given in the application documentationat hand must be observed.Safety-relevant applications are only allowed if clearly and explicitly specifiedin the application documentation "Integrated Safety Technology". If