Bosch Rexroth IndraDyn S - MKE Project Planning Manual

Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drivesand Controls| Bosch Rexroth AG 11/131Important Instructions on Use2 Important Instructions on Use2.1 Intended Use2.1.1 IntroductionRexroth products are developed and manufactured according to the state ofthe art. Before they are delivered, they are inspected to ensure that they operatesafely.WARNINGCorporal and material damage due to wrong use of products!The products were designed for the use in an industrial environment and mustonly be used as intended. If they are inappropriately used, situations may arisethat result in damage to material and personnel.2.1.2 Areas of Use and ApplicationRexroth, as the manufacturer, does not provide any warranty, assumeany liability, or pay any damages for damage caused byproducts not being used as intended. Any risks resulting from theproducts not being used as intended are the sole responsibility ofthe user.Before Rexroth products can be used, the following requirements must be fulfilledso as to ensure that they are used as intended:●●●●Everyone who in any way deals with one of our products must read andunderstand the corresponding notes regarding safety and regarding theintended use.If the products are hardware, they must be kept in their original state, i.e.no constructional modifications must be made. Software products mustnot be decompiled; their source codes must not be modified.Damaged or improperly working products must not be installed or put intooperation.It must be ensured that the products are installed according to the regulationsmentioned in the documentation.Rexroth motors of the MKE series are intended to be used as rotary main andservo drives, as linear drives or as modular motors. The following are typicalfields of application:●●●●Machine toolsPrinting and paper-processing machinesPackaging and food-processing machinesMetal-forming machinesUnit types with different driving powers and different interfaces are available foran application-specific use of the motors.Controlling and monitoring of the motors may require connection of additionalsensors and actuators.