Bosch Rexroth IndraDyn S - MKE Project Planning Manual

Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drivesand Controls14 Appendix14.1 List of Standards| Bosch Rexroth AG 119/131Standard Edition Title ConcordanceAppendixDirective 94/9/EC 1994-03-23ATEX DIRECTIVES 2000-05Directive 94/9/EC of the European Parliament and the Councildated 23.03.94 on the approximation of the laws of the MemberStates concerning equipment and protective systems intendedfor use in potentially explosive atmospheresATEX DIRECTIVES (1st edition) Directives for the applicationof directive 94/9/EC of the European Parliament and theCouncil dated 23.03.94 on the approximation of the laws ofthe Member States concerning equipment and protective systemsintended for use in potentially explosive atmospheresDirective 89/336/EEC1989-05-03Directive of the Council dated May 3, 1989 on the approximationof the laws of the Member States concerning electromagneticcompatibilityDirective 98/37/EC of the European Parliament and the Councildated June 22, 1998 on the approximation of the laws and89/392/EEC replacedby 98/37/EC 1998-06-22 administrative regulations of the member states concerningmachinesDIN 332-2 1983-05Center holes 60° with thread for stub shafts of rotating electricalmachinesDIN 42948 1965-11 Mounting flanges for electrical machinesDIN 42955 1981-12DIN 6885-1 1968-08True running of stub shafts, coaxiality and planned running ofthe mounting flanges of rotating electrical machines; tolerances,testDriver connection without pick-up; feather keys, grooves, highshapeIEC 60072(1971)DIN 748-3 1975-07 Cylindrical stub shafts ends for electrical machines IEC 60072(1971)DIN EN 50014,VDE0170/0171Part 1DIN EN 50014/A3;VDE 0170/0171Part 1/A3 DraftDIN EN 50014/AA;VDE 0170/0171Part 1/AA Draft2000-021998-081999-09Electrical equipment for potentially explosive areas - Generalconditions; German version EN50014:1997 + Corrigendum:1998 + A1:1999 + A2:1999Electrical equipment for potentially explosive areas - Generalconditions; amendment A3; German version EN50014:1997/prA3:1998Electrical equipment for potentially explosive areas - Generalconditions; amendment AA; German version EN50014:1997/prAA:1999EN 50014(1997-06);EN 50014/A1(1999-02);EN 50014/A2(1999-02)EN 50014/prA3(1998-03)EN 50014/prAA(1999-02)DIN EN 50015,VDE 0170/0171Part 22000-02Electrical equipment for potentially explosive areas - Oil immersion"o"; German version EN 50015:1998EN 50015(1998-09)DIN EN 50016/A1; 2003-03Electrical equipment for potentially explosive areas - Pressure-proofencapsulation "p"; German version EN 50016:2002DIN EN 50016,VDE 0170/0171Part 32003-03Electrical equipment for potentially explosive areas; Pressureproofencapsulation "p"; German version EN 50016:2002EN 50016(1995-10)