Bosch Rexroth IndraDyn S - MKE Project Planning Manual

More documents

Recommendations

Info

8/131 Bosch Rexroth AG | Electric Drivesand ControlsRexroth MKE Synchronous Motors | Project Planning ManualIntroduction to the ProductStructure and components●●●●●High performance dataHigh dynamics (owing to the favorable ratio of torque to inertia mass)High overload capability (owing to the favorable heat dissipation from thestator windings to the outside wall of the motor housing)Peak torque utilizable across a wide speed range (owing to electroniccommutation)Continuous start-stop operation possible with high repeat frequencies(owing to electrical commutation)● Easy attachment to the machine (owing to flange according to DIN 42948)11.65)●●Any installation positionSimple and fast startup (thanks to data memory)MKE motors are permanent-magnet motors with electronic commutation. Specialmagnet materials permit the motors to be designed with low inertia masses.The following figure shows the principal design of MKD motors.1.1.2 Versions(1) Drive shaft(2) Stator with winding(3) Bearings(4) Motor encoder(5) Connection unit(6) Terminal box lid(7) Holding brake (optional)(8) Grounding clamp(9) Shaft sealing ring(10) Rotor with permanent magnetsFig.1-2: Design of MKE motorsMHE motors are available in various designs. On the basis of existing nationalregulations and standards, the MKE motors have to be subdivided into housingtypes●●.E according to European Standard (EU) andU according to American Standard (UL)
Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drivesand Controls| Bosch Rexroth AG 9/131Introduction to the Product1.2 About this Documentation1.2.1 Structure of this Document EditionThe connection technology of the MKE motors is processed differently accordingto the national regulations.Please heed the notes as regards the applicable national regulationsin the chapter "Application notes".The present documentation contains safety regulations, technical data, andoperating instructions for MKE motors. The individual chapters can be subdividedinto the following focal points:Chapter Title Contents1 Introduction to the product General information2 Important instructions on use3 Notes regarding safety4 Technical data5 Specifications6 Type codesSafetyProduct description(for plannersand designers)7 Accessories and options8 Connection techniques9 Operating conditions and application notes10 State of delivery, identification, handling,transport and storage11 InstallationPractical information (for operatingand maintenancepersonnel)12 Startup, operation and maintenance13 Environmental protection and disposal14 Appendix15 Service and supportGeneral informationFig.1-3:Index1.2.2 Additional DocumentationDocument structureIf this documentation contains references to additional documentation,the version of the latter is always represented in bold andunderlined type (e.g. 06). If documentation is ordered, its versionmay be a higher one!1.2.3 StandardsThis documentation refers to German, European and international technicalstandards. Documents and sheets on standards are subject to copyright protectionand may not be passed on to third parties by Rexroth. If need be, pleasecontact the authorized sales outlets or, in Germany, directly:BEUTH Verlag GmbH
Page 1: Electric DrivesLinear Motion andand
Page 4 and 5: II/VIBosch Rexroth AG | Electric Dr
Page 6 and 7: IV/VIBosch Rexroth AG | Electric Dr
Page 8 and 9: VI/VIBosch Rexroth AG | Electric Dr
Page 12 and 13: 10/131 Bosch Rexroth AG | Electric
Page 26: 24/131 Bosch Rexroth AG | Electric
Page 29 and 30: Project Planning Manual | Rexroth M
Page 61 and 62:
Project Planning Manual | Rexroth M
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
show all

Bosch Rexroth IndraDyn S - MKE Project Planning Manual

Create successful ePaper yourself

Delete template?

Save as template?