Bosch Rexroth IndraDyn S - MKE Project Planning Manual

More documents

Recommendations

Info

98/131 Bosch Rexroth AG | Electric Drivesand ControlsRexroth MKE Synchronous Motors | Project Planning ManualState of Delivery, Identification, Handling, Transport and StorageEnvironmental factor Unit Class 1K3Low rel. air humidity % 5High rel. air humidity % 95Low absolute air humidity g/m³ 1High absolute air humidity g/m³ 29Shock stressFig.10-5:Conditions for storagesee "Technical Data"CAUTIONDamage and invalidation of the warranty due to incorrect storage!⇒ Store the motors horizontally in a dry, vibration-free, dust-free and corrosionprotectedlocation.⇒ Permissable temperature range –20 °C to +80 °C.
Project Planning Manual | Rexroth MKE Synchronous Motors Electric Drivesand Controls| Bosch Rexroth AG 99/131Installation11 Installation11.1 SafetyWARNINGInjuries due to live parts! Lifting of heavy loads!⇒ Install the motors only when they are de-energized and not connected electrically.⇒ Use suitable tackles, protective equipment and protective clothing duringtransport.⇒ Observe the notes regarding safety found in previous chapters.11.2 Skilled PersonnelCarry out all working steps especially carefully. In this way, you minimize therisk of accidents and damage.Any work on the system and on the drives or in their vicinity may be carried outonly by appropriately trained technical personnel.Please make sure that all persons carrying out●●●Installation workMaintenance, orOperational activitieson the system are adequately familiar with the contents of this documentationas well as with all warnings and precautionary measures contained therein.Qualified skilled personnel are defined as those who have been trained,instructed or are authorized to activate and deactivate, ground and mark electriccircuits and equipment according to the technical safety regulations. Qualifiedtechnical personnel must possess appropriate safety equipment and have beentrained in first aid.11.3 Mechanical Mounting – Motor Assembly11.3.1 Flange ConnectionTo attach the motors correctly and safely to the machine, Bosch Rexroth recommendsthe following screws and washers for motor mounting.The screwed connections must be able to take up both the forcedue to the weight of the motor and the forces acting during operation.For standard case, use pan-head machine screw DIN 912 - M... x ... - 8.8 andrelated washers according to DIN EN 28738. In case of several motors, theintegration of washers is not required, see table.If the screws and washers used do not comply with this recommdation,the stability class of the screws and the hardness class mustbe equivalent in order to transmit the required tightening torques(see Fig. 11-1).
Page 1:
Electric DrivesLinear Motion andand
Page 4 and 5:
II/VIBosch Rexroth AG | Electric Dr
Page 6 and 7:
IV/VIBosch Rexroth AG | Electric Dr
Page 8 and 9:
VI/VIBosch Rexroth AG | Electric Dr
Page 10 and 11:
8/131 Bosch Rexroth AG | Electric D
Page 12 and 13:
10/131 Bosch Rexroth AG | Electric
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26:
Page 29 and 30:
Project Planning Manual | Rexroth M
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50: Project Planning Manual | Rexroth M
Page 99: Project Planning Manual | Rexroth M
show all

Bosch Rexroth IndraDyn S - MKE Project Planning Manual

Create successful ePaper yourself

Delete template?

Save as template?