NEXO NXAMP 4X1 Owner's Manual - Yamaha Commercial Audio

QUICK STARTUsing the amplifier without the TDcontroller functionalityIf you want to use the amplifier without the TDcontroller, just choose the “FLAT mode”setup. In this mode, no EQ and no protection is applied to the cabinets.Please note that the amplifier will still have 2.2 ms analog input to analog output latency inthat mode (i.e. the same latency than an NX242 TDcontroller in flat mode).In Flat mode, full amplifier digital protections are still available, and some functionality likevolume control, input patching, mute, delay, gain and ArrayEQ are working. Remotecontrol can be used as well.Back to defaultStartup the amplifier with the “select 1” button down and you will have the possibility toreset the settings to default.Auto saveThe current set-up is automatically saved during power down. At power up the last savedsettings are restored.Enter the download modeKeep the ‘mute 1’ button down during boot up will enter the download mode. See furtherfor connection to the computer and download software (Nxwin) description.PAGE 17 OF 80