2000 Cadillac Catera Owners Manual

To raise the window, pull up the front of the control.Pulling the control up for about one second and thenreleasing it will express-close the window.When you stop your vehicle and turn the ignitionkey to LOCK, you can still use the power windows.The electrical power to operate the windows will notshut off until a door is opened -- there is no timelimit to this feature. As soon as a door is opened,power window movement will stop immediately.Programming the Power WindowsIf the battery on your vehicle has been recharged,disconnected or is not working, you will need toreprogram each power window for the express-openand close features to work. Before reprogramming, youwill need to replace or recharge your vehicle’s battery.To program each window, follow these steps:1. Close all doors.2. Press and hold the power window control until thewindow has fully opened.3. Pull the power window control up until the windowis fully closed.4. Continue holding the control up for approximatelyfive seconds after the window is completely up.The window is now programmed. Repeat the process foreach window.Anti-Pinch FeatureIf a hand, an arm or another object is above the middleof the window and is in the way of the power windowexpress-closing, the window will stop at the obstructionand express-open to a preset factory position.CAUTION:Pressing and holding the power window controlbutton will turn off the anti-pinch feature.If this happens, a power window won’t stop ifsomething gets in the way. You or others couldbe injured, and your window could be damaged.Be careful not to press and hold the powerwindow control button.2-33