2000 Cadillac Catera Owners Manual

Memory Seat and MirrorsAfter adjusting the driver’s seat to a comfortable position,also adjust the interior and exterior mirrors. To programthe memory seat and mirrors, press memory button “M”and memory button “1” at the same time and holdfor five seconds.These buttons are located on the outboard side ofthe driver’s seat. Seat and mirror positions may beprogrammed for two additional drivers by repeating theabove steps and pressing memory button “2” or “3”instead of memory button “1.”If your vehicle is in PARK (P), you can recall mirrorand seating positions by pressing and holding one ofthe three memory buttons. This will adjust the seatand mirrors to where you have previously programmedthem. Seat and mirror movement is immediately stoppedif the memory button is released or if a seat or mirrorcontrol is moved.Also note that if you try to adjust the driver’s memoryseat and it doesn’t move, try opening the driver’s door.This will reactivate power to the driver’s seat. (Power tothe driver’s seat “times out” after 30 seconds. Powerto the passenger’s seat is always present.)1-4