2000 Cadillac Catera Owners Manual

2000 Cadillac Catera Owners Manual 2000 Cadillac Catera Owners Manual

wpc.3cdd.edgecastcdn.net
from wpc.3cdd.edgecastcdn.net More from this publisher
12.07.2015 Views

3. Return to the HomeLink transmitter in yourvehicle and firmly press and release the HomeLinktransmitter button you have already programmed fortwo to three seconds. Press and release the buttonagain (you may need to do this step up to threetimes) to make sure that the HomeLink transmitterhas been trained to the garage door opener motorhead unit. Check that the training was successful.The garage door opener should now recognize theHomeLink transmitter. You may either use theHomeLink transmitter or the hand-held transmitterto open the garage door.If after following these instructions, you still haveproblems training the garage door opener, contact theHomeLink transmitter manufacturer at 1-800-355-3515.Erasing ChannelsTo erase all three programmed channels, hold downthe two outside buttons until the indicator light beginsto flash (after 20 seconds). Release both buttons.AccessoriesAccessories for the HomeLink transmitter are availablefrom the manufacturer of the unit. If you would likeadditional information, please call 1-800-355-3515.2-61

The Instrument Panel -- Your Information System2-62

3. Return to the HomeLink transmitter in yourvehicle and firmly press and release the HomeLinktransmitter button you have already programmed fortwo to three seconds. Press and release the buttonagain (you may need to do this step up to threetimes) to make sure that the HomeLink transmitterhas been trained to the garage door opener motorhead unit. Check that the training was successful.The garage door opener should now recognize theHomeLink transmitter. You may either use theHomeLink transmitter or the hand-held transmitterto open the garage door.If after following these instructions, you still haveproblems training the garage door opener, contact theHomeLink transmitter manufacturer at 1-800-355-3515.Erasing ChannelsTo erase all three programmed channels, hold downthe two outside buttons until the indicator light beginsto flash (after 20 seconds). Release both buttons.AccessoriesAccessories for the HomeLink transmitter are availablefrom the manufacturer of the unit. If you would likeadditional information, please call 1-800-355-3515.2-61

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!