2000 Cadillac Catera Owners Manual

Headlamp High/Low BeamWith the Twilight Sentinel on or with the lamp controldial turned to the headlamp position, push the turnsignal lever on the driver’s side of the steering wheelaway from you to turn on the high-beam headlamps.Windshield WipersThis light on theinstrument panel clusterwill be on, indicatinghigh-beam usage.Pull the lever back to the original position to returnto low-beam headlamps. For more information,see “Headlamps” in the Index.Flash-To-PassThis feature uses the high-beam headlamps to signal thedriver in front of you that you want to pass. This featurewill work with either the headlamps on or off.To use, pull the turn signal lever toward you and release.WIPER: Move the lever on the passenger’s side of thesteering wheel up and down to control the wipers.MIST: Tap the lever up and then release it for a singlewipe cycle. For more cycles, pull and hold the lever.= (HIGH): Move the lever all the way up for a fastwiper speed.- (LOW): The third position up controls the lowwiper speed.-- (DELAY): This position is for a controlled delaysetting. Turn the control dial on the lever to increase ordecrease the delay between wipe cycles.o (OFF): This position turns off the wipers.2-36