C1000-MV Auto PFC Cap Bank - Gentec

EnclosuresThe Gentec C1000 Series Enclosures provide along-lasting corrosion and weather resistantfinish with an aesthetic appearance.The enclosures are easily and readily accessibleby simply removing front and rear or by openingthe front and rear access doors. Door stops limitdoor swing to 130° and prevent accidentalclosure.The enclosure provides housing ruggedness,durability and an attractive appearance, withminimal maintenance through the use of #11-gauge formed sheet steel. The enclosures arewelded construction.While there are numerous colors from which tochoose, standard colors are ANSI No. 61-LightGray for indoor assemblies and ANSI No. 24-Dark Gray for outdoors units. The 4-inchstructural steel base is painted with a paint toprevent corrosion.The enclosures are equipped with four (4)removable lifting lugs.Other features include:• Hardware which cannot be removedexternally• Three-point latching on all doors with singleor double door entry• Baffled vent panels (outdoor units only)which provide protection against forced entryof foreign objects, weather elements orwildlife• Optional pent ahead bolts for additionalaccess restriction• Provides adequate space for numerouscomponent configurationsAvailable Options:Gentec will customize standard capacitorassemblies to fit your specifications.The following is a list of available options forCapacitor Assemblies.Incoming Line Options• Bottom or top cable entry• Bus pad, lugs or cable terminators• Roof bushing entry (requires specialenclosure)• Bushing wells• Bank disconnect, 3 single-pole hook-stick• Bank disconnect, group-operated• Bank fuse, disconnect and non-disconnectstyle mounting• Control / potential transformer (with primaryCLF)• Current transformerEnclosure Options• External NEMA-rated control cabinet• Auxiliary control section (part of mainenclosure)• Remote control cabinet mounting• Vented panels• Vent fans• Key interlock schemeControl Options• VAR sensing control (hand-off-auto)• Manual control (on-off)• Solid-state power factor control• Voltage or current control• Control cabinet lights and receptacles• Blown fuse alarm system• Programmable controller• Custom micro-processor controlHarmonic Filter SystemsCustom engineered harmonic filter systems areavailable to assure a constant level of powerquality. Incorporating reactors in series withcapacitors will detune or lower the frequency ofresonance, assuring efficient capacitoroperation.Power factor correction capacitors may besubject to overloading (blown fuse) or failure,due to excessive current and voltage, created byharmonics.A reliable, cost effective solution is to install aharmonic filter system.• Application Engineered• Iron Core and Air Core Reactors• Large Inrush RequirementsPage 3 of 5