Wega 401 M2.40 FKW - EWM Hightec Welding GmbH

Design and functionInserting the wire electrode12543Figure 5-8Item Symbol Description 01 Pressure units2 Clamping units3 Wire feed nipple4 Guide tube5 Capillary tube or plastic core with support tube, depending on the torchequipment• Extend and lay out the torch hose package.• Unfasten pressure units and fold out (clamping units and pressure rollers will automatically flipupwards).• Unwind welding wire carefully from the wire spool and insert through the wire inlet nipple over the driveroller grooves and the guide pipe into the capillary tube and Teflon core using guide pipe.• Press the clamping element with the pressure roller back downwards and fold the wire units back upagain (wire electrode should be in the groove on the drive roller).• Set the contact pressure with the adjusting nuts of the pressure unit.• Press the wire inching button until the wire electrode projects out of the welding torch.NOTEThe inching speed is infinitely adjustable by simultaneously pressing the wire inchingbutton and turning the wire speed rotary dial. The display shows the selected inchingspeed.099-005224-EW50108.11.201139