Wega 401 M2.40 FKW - EWM Hightec Welding GmbH

Machine description – quick overviewMachine control – Operating elementsItem Symbol Description 06 Button, Gas testThe welding voltage and wire feed remain off when testing and setting the gas flow.Pressing the key button once causes shielding gas to flow for approx. 25 seconds. Thebutton can be pressed again at any time to cancel the process.7 Button, Wire inchingFor inching the wire electrode when changing the wire spool(speed = 6.0 m/min, constant).The welding wire is inched into the tube package with the current off and without gasbeing expelled.This ensures a high degree of safety for the welder by preventing accidental ignition ofthe arc.8 Upper, displayDisplays welding voltage or person who designated the runtime parameters9 Signal light, HOLDLit: Display shows the last parameters used for welding.Not lit: Display shows the setpoint values or current values during welding.10 Signal light, Wire speedLights when the wire speed is shown on the display.099-005224-EW50108.11.201123