HomeWorks Technical Reference Guide International Edition - Lutron

More documents

Recommendations

Info

Keypad Specifications and AddressingModelInput voltageEnvironmentAll keypads.15VDC Class 2/PELVAmbient temperature: 0-40°C, 32-104°FAmbient humidity: 0-90% humidity, non-condensing. Indoor use only.Low-voltage wire type Two pair [one pair 1.0mm 2 (#18 AWG), one pair 1.0-0.5mm 2 (#18-22 AWG) twistedshielded] Class 2/PELV wire. Lutron ® wire model GRX-CBL-346S-500 may be used.Low-voltagewiring configurationDaisy-chain, star, T-tap. Termination not required. Total length of wire on anylink cannot exceed 305m (1,000 feet) per wire run. Total length of wire on thatlink cannot exceed 1220m (4,000 feet). Maximum of 32 devices per processor linkthat has been configured for keypads.COMPONENTSLow-voltage connections One 4-pin removable terminal block. Terminal block will accept up to four 1.0mm 2(#18 AWG) wires.AddressingVia DIP switch located on unit. Units should be addressed before mounting inwall.DiagnosticsLEDs provide diagnostics for troubleshooting.ESD protectionSurge protectionMeets or exceeds the IEC 61000-4-2 standard.Meets or exceeds ANSI/IEEE standard c62.41.Miswire protectionAll terminal block inputs are over-voltage and miswire-protected against wirereversals and shorts.Mounting See table 1, page 7.25.EngravingIR keypadsEngraving of keypads and/or keypad buttons available.Compatible with Lutron IR transmitters: GRX-IT-WH, and GRX-8IT-WH.Shipping weight0.1kg (0.4 pounds)Keypad link LED count See table 1, page 7.25.Address#1SwitchsettingAddress#9SwitchsettingAddress#17SwitchsettingAddress#25SwitchsettingOn - UpOff - Down2101826311192741220285132129614223071523318162432Figure 1 –addressing DIP switches7.24 www.lutron.com
SpecificationsControlLED CountWallboxes RequiredHWI-2SE3European-style (241683)HWI-4SE4European-style (241683)4SE-IR4European-style (241683)HWI-8SE8European-style (241683)HWBO-4SE4European-style (241683)HWBO-8SE-IR8European-style (241683)seeTouchTM (all models)151-gang US (241218)HWI-KP551-gang US (241218)HWI-KP10101-gang US (241218)HWI-KP15152-gang US (241218)HWI-LB661-gang US (241218)HWI-LB992-gang US (241218)HWI-KP5-DN5Not requiredHWI-KP5-DW5(241399)HWI-5S-M51-gang US (241218)HWI-5S-NM51-gang US (241218)HWI-5S-IR51-gang US (241218)HWI-2B101-gang US (241218)HWS-3B-G10WBOX-SA1-Q1HWS-4B-G10WBOX-SA1-Q1HWS-3B-BHWS-4B-BHWI-CCI-8HWI-CCO-810101010WBOX-SA1-Q1WBOX-SA1-Q1n/an/aCOMPONENTSHWI-WCI7n/aHWI-HHP-LD45n/aHR-REP-15n/aTable 1 – keypad LED count and wallbox informationNotes:A single 8 series P5 processor can support 350 keypad LEDs (older 8 series processors can support 300 LEDs).This includes all keypads on the three configurable links (link 4, 5, and 6). If more than 350 LEDs are placedon a single 8 series processor, an auxiliary power supply must be used. See pages 12.4-12.6 for auxiliary powersupply specifications.Link 6 on a 4 series processor can support 150 keypad LEDs. If more than 150 LEDs are used on link 6, anauxiliary power supply must be used. Links 4 and 5 on a 4 series processor always require an auxiliary powersupply if keypads are to be used. See pages 12.4-12.6 for auxiliary power supply specifications.Technical Support: hwisupport@lutron.com7.25
Page 1:
HomeWorks®Technical Reference Guid
Page 5 and 6:
INTRODUCTIONIntroductionTechnical S
Page 7 and 8:
Introduction to HomeWorks ®2.3I M
Page 10 and 11:
INTRODUCTIONNotes2.6 www.lutron.com
Page 12 and 13:
Design OverviewSYSTEM DESIGNSystem
Page 14 and 15:
Centralised DesignSYSTEM DESIGNA ce
Page 16 and 17:
Hybrid DesignA hybrid design for Ho
Page 18 and 19:
Series Overview8 S E R I E SThe 8 s
Page 20 and 21:
4 Series System LayoutGRAFIK Eye®S
Page 22 and 23:
4 Series System Wiring and Communic
Page 24 and 25:
8 series System Wiring and Communic
Page 26 and 27:
NotesSYSTEM DESIGN3.16 www.lutron.c
Page 28 and 29:
Maestro ® Local Lighting ControlsC
Page 30 and 31:
Maestro ® Local Lighting ControlsH
Page 32 and 33:
Maestro ® Local Lighting ControlsM
Page 34 and 35:
GRAFIK Eye ® Preset Local Lighting
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
GRAFIK IntegraleTMPreset Local Ligh
Page 42 and 43:
GRAFIK IntegraleTMPreset Local Ligh
Page 44 and 45:
Wallbox Power ModuleControl UnitsMo
Page 46 and 47: Wallbox Power ModuleFigure 4 - rota
Page 48 and 49: Remote Power ModulesHomeWorks ® Re
Page 50 and 51: Remote Power ModulesHW-RPM-4M-230
Page 52 and 53: Remote Power Modules - Wiring Diagr
Page 54 and 55: Module InterfaceModule Interfaces c
Page 56 and 57: Module InterfaceSpecifications appl
Page 58 and 59: Remote Power Panels (without breake
Page 60 and 61: Remote Power Panels (without breake
Page 62 and 63: Remote Power Panels (with breakers)
Page 64 and 65: Remote Power Panels (with breakers)
Page 66 and 67: Power Boosters and InterfacesPower
Page 68 and 69: Power Boosters - Wiring DiagramsRem
Page 70 and 71: FDBI - Wiring DiagramsLutron ® Hi-
Page 72 and 73: 0-10V Interface - Wiring Diagrams22
Page 74 and 75: KeypadsHomeWorks ® keypads are ava
Page 76 and 77: European-style KeypadsE U R O P E A
Page 78 and 79: ON1 2 3 4 5 6 7 8 9 1 0European-sty
Page 80 and 81: seeTouch ® Keypadss e e To u c h -
Page 82 and 83: seeTouch Keypads -Bang & Olufsen Co
Page 84 and 85: Keypads - Slim ButtonS L I M B U T
Page 86 and 87: Slim and Large Button Keypads -Wiri
Page 88 and 89: Keypads - Signature SeriesS I G N A
Page 90 and 91: Signature SeriesTM and ArchitraveTM
Page 92 and 93: Contact Closure InterfaceContact Cl
Page 94 and 95: Wallbox Closure InterfaceThe Wallbo
Page 98 and 99: NotesCOMPONENTS7.26 www.lutron.com
Page 100 and 101: P5 ProcessorsHomeWorks® Processors
Page 102 and 103: P5 ProcessorsCOMPONENTSP R O C E S
Page 104 and 105: P5 ProcessorsNotes from previous pa
Page 106 and 107: 8 Series P5 ProcessorsCOMPONENTSMod
Page 108 and 109: 8 Series P5 ProcessorsPower CordRPM
Page 110 and 111: 4 Series P5 ProcessorsCOMPONENTSMod
Page 112 and 113: Connecting Multiple Processors4 ser
Page 114 and 115: System SpecificationsMaestro ® loc
Page 116 and 117: Low-voltage EnclosuresLow-voltage e
Page 118 and 119: Low-voltage Enclosures4 4 C M ( 1 7
Page 120 and 121: Hybrid Signal RepeaterH Y B R I D S
Page 122 and 123: Hybrid Signal RepeaterMUXMUX+15 VCO
Page 124 and 125: Wireless Tabletop KeypadsModel Numb
Page 126 and 127: NotesCOMPONENTS10.8 www.lutron.com
Page 128 and 129: Interface for Sivoia QEDTMI N T E R
Page 130 and 131: Interface for Sivoia QEDTMAddress N
Page 132 and 133: Link ExtenderModelInput voltageRegu
Page 134 and 135: Auxiliary Power Supply - HWI-PS-230
Page 136 and 137: 432132143213214321321Auxiliary Powe
Page 138 and 139: Electronic Low-Voltage Transformers
Page 140 and 141: Wire Landing BoardW I R E L A N D I
Page 142 and 143: Colours and FinishesHomeWorks® pro
Page 144: PatentsThese products may be covere
show all

HomeWorks Technical Reference Guide International Edition - Lutron

Create successful ePaper yourself

Delete template?

Save as template?