HomeWorks Technical Reference Guide International Edition - Lutron

Interface for Sivoia QEDTMI N T E R F A C E F O R H O M E W O R K S A N DS I V O I A Q E D ( M O D E L # H W I - Q 9 6 )76mm (3 inches)The interface allows the HomeWorks system toprecisely control up to 96 individual Sivoia QEDshades, blinds, draperies and curtains. Positioncan be set to open, closed, or anywhere in between.I N S TA L L AT I O N I N F O R M AT I O NThe HWI-Q96 interface can be mounted in aHomeWorks low-voltage enclosure in place of anycontact closure interface board (HWI-CCI or HWI-CCO).If space does not permit an enclosure, the HWI-Q96can be mounted as a stand-alone device.140mm(5-1/2 inches)C O N N E C T I O N T O W I R E D P R O C E S S O RThe interface connects to a configurable linkconfigured for H48/Q96. Up to four interfaces can beconnected one link. HWI-Q96 interfaces and H48Dimmer Interface Boards can be used on the same linkas long as their number does not exceed 4. The totalnumber of lighting/shading zones cannot exceed 256per processor.Interface for HomeWorks and Sivoia QED(HWI-Q96)COMPONENTSto HomeWorksprocessor linkto Sivoia QED linkFigure 16 – HWI-Q96 Connections11.2 www.lutron.com