UFS | EÜK screed-covered duct system - OBO Bettermann

Mounting aid, underfloor box UZD/UGDPlanning aid, screed-covered duct systemUse of a separating layerWhen used in floating screed/heated screedson insulation layers, the box can be separatedfrom the screed by a separating layer (of up to3 mm thick), which reaches to under the boxtop frame.Incorrect processingAlways talk to the screed layer. Installation errorssuch as those shown here mean that thefirm seat of the box is not guaranteed.Mount stacking aidRelease the locking lid and lightly turn out thebolts. Insert a quick release aid and lift out thebolt.Mount stacking aidRemove the box top cover upwards and replaceany existing fall plates with the new fallplates.Mounting the box top frameReattach the new box top frame, insert thescrews, remove the quick unlocking aid, coverthe screws with the locking lids.Decoupling from outsideAfter screed laying, the top frame of the underfloorbox can be decoupled from the box base.To do this, release the locking lid, insert thequick release aids and remove the height-adjustmentscrews.08 UFS_Katalog_Middle_East_2010 / en / 13/12/2010 (LLExport_01150)Decoupling from insideRemove the mounting protection lid and thefour locking lids from the underfloor box. Gripthe slider with two fingers and pull it inwards.Remove the height adjustment screws upwards.After decouplingPlace the locking lid back in the box top frame.Earthing of the box top frameMount the earth conductor clamp 8AWR in thefloor plate and connect the earth conductor tothe earthing cable.UFSOBO33