User Manual LCD 240-Configurator - SCHAEFER

KapitelbezeichnungKapitelbezeichnungX.X UnterpunktUser manual LCD 240ConfiguratorLCD 240-2VSLCD 240-2VPLCD 240-2HSLCD 240-2HSCLCD 240-2HPLCD 240-2HPC

KapitelbezeichnungKapitelbezeichnungX.X UnterpunktSCHAEFER GmbHWinterlinger Str. 472488 SigmaringenGermanyPhone +49 7571 722-0Fax +49 7571 722-99info@ws-schaefer.dewww.ws-schaefer.deSupportIf you have any questions regarding this product please contact:Phone +49 7571 722-51Fax +49 7571 722-99CopyrightDuplication (copy, print, microfilm or any other form) as wellas electronic spreading of this documentis only permitted after formal writting consent of SCHAEFER GmbH.SCHAEFER GmbH reserves the right to carry out alterationsof technical details without prior notice.For all transactions our General Conditions of Saleand Delivery shall be applicable.All rights reserved.2Ress. 012557Revision: 2009-02-02

IndexUser manual LCD 240-2xx ConfiguratorIndex1 Create a new configuration .................... 41.1 Choice of display............................................... 51.2 Settings................................................................ 61.2.1 Number of floors...................................................... 61.2.2 Basic settings display.............................................. 71.3 Floor configuration.......................................... 81.4 Edit floor information / logo......................... 91.5 Special signals.................................................... 91.6 Edit picture of special signal....................... 102 Transfer the configurationto the display........................................... 113

Create a new configurationLCD 240-2xx Configurator1 Create a new configurationPlease start the LCD240-2xx ConfiguratorIn order to create a new configuration, please clickon the icon „new“, or select file/new in the menu bar.4

Create a new configuration1.1 Choice of display1.1 Choice of displayThe following window opens up.After choosing the type of display, the followingwindow opens up.All settings are shown and can be changed within the Configurator window.5

Creat a new configuration1.2 Settings | 1.2.1 Number of floors1.2 Settings1.2.1 Number of floorsThe number of floors can be chosen in this window.The maximum number of floors is 32.6

Creat a new configuration1.2.2 Basic settings display1.2.2 Basic settings displayThe coding, the location and the travelling signal canbe chosen in this area of the configuration window(basic settings)1.2.2.1 Coding:• dual• grey1.2.2.2 Location:• car• landing1.2.2.3 Travelling signal:• external(travelling signal is provided by the controller)• automatic(with each changing of floors, the travelling signalis simulated)1.2.2.4 Logo:• To display a permanent logo, plase activate „dislay“in the field „Logo“. Please note, that it is notpossible to show additional floor information whena logo is diplayed.7

Create a new configuration1.3 Floor configuration1.3 Floor configurationTo enter the floor designations, a floor has to bechosen (stop / control signal). The floor designationcan be entered in the field floor configuration / floordesignation.To show additional floor information, a floor numberhas to be chosen in the window stop / control signal.After that the floor information can be selected(floor configuration / floor information). The floorinformation is only available if the logo is not activated.12 different floor information are possible.• Size of picturehorizontal display160 x 32 Pixel• Size of picturevertical display48 x 128 Pixel8

Create a new configuration1.4 Edit floor information / logo1.4 Edit floor information / logoTo edit the floor information, you need to have MSPaint on your computer. Please choose the floor (simulation/ control signal). The floor information willbe shown in the preview window.With a double click on the floor information, MSPaint will automatically open up and show the picture.Now it can be edited. After editing the picture,please save it (file / safe)The preview window will automatically show the newfloor information.9

Create a new configuration1.5 Special signals1.5 Special signalsFour special signals can be configured and saved inthis field.• Size of picture horizontal display: 80 x 96 pixel• Size of picture vertical display:128 x 128 pixel10

Creat a new configuration1.6 Edit picture of special signal1.6 Edit picture of special signalTo edit the special signal, you need to have MS Painton your computer. Please choose the special signal(simulation / special signal). It will be shown in thepreview window.With a double click on the special signal, MS Paintwill automatically open up and show the picture.Now it can be edited. After editing the picture,please save it (file / safe)The preview window will show automatically the newspecial signal.11

Transfer the configuration to the display2 Transfer the configuration to the displayThe first step is to safe the new configuration. Pleaseuse the menu file / safe as.The following window opens up:After that, please choose the menu edit /send configuration or press the green arrowPlease choose the COM – port.12

Transfer the configuration to the displayThe correct project will be chosen automatically. Youonly have to choose the project file (projekt_h.txt forhorizontal, pojekt_v.txt for vertical LCD).Please press the button “Create File”.Please select the following path:C:\Programme\SCHAEFER GmbH\LCD-2xx Configurator\ProjectAfter confirming with “safe“, the following window,with the basic functions, is displayed.13

Transfer the configuration to the displayThe configuration can be transferred. To do thisplease press “program”.Down right of the window the status of the programmingis shown. “Ready” will be displayed aftersuccessful programming.After finishing the program, the LCD-2xxConfigurator will be shown automatically.14

Memo15