Tideflex CheckMate Check Valve - RM Headlee

CHECKMATE ® VALVEDesigned for Inline ServiceMounting Styles and ConfigurationsDownstream ClampFlowUpstream ClampFlowDownstream FlangedUpstream FlangedFlowFlowDownstream Flanged Thimble InsertUpstream Flanged Thimble InsertFlowFlowFlange shape and bolt pattern can be customized.Flangeless thimble inserts are available.CHECKMATE ® VALVENOMINALPIPE SIZE I.D.*OVERALLLENGTH**NUMBEROF CLAMPSCUFFDEPTHBACK PRESSURERATINGInches Millimeters Inches MillimetersInches Millimeters Feet Meters4 100 7.86 200 1 1.5 38 40 126 150 9 229 1 2 51 40 128 200 15.23 387 1 2 51 40 129 225 15.38 391 1 2 51 40 1210 250 16.12 409 1 2 51 40 1212 300 23 584 1 2 51 40 1214 350 25.75 654 1 4 102 20 616 400 28.61 727 1 4 102 20 618 450 31 787 1 4 102 20 620 500 42.14 1070 2 8 203 20 624 600 47.5 1207 2 8 203 20 630 750 54.87 1394 2 8 203 20 636 900 62.25 1581 2 8 203 20 642 1050 70.62 1794 2 8 203 10 348 1200 79 2007 2 8 203 10 354 1350 86.37 2194 2 8 203 10 360 1500 102.5 2604 2 12 305 10 3*Larger sizes available upon request. **Shorter lengths available.Check Valves 7

The best choice for the toughest applications.In addition to the Checkmate ® Inline Check Valve, Tideflex ®Technologies offers a complete line of check valves.TF-1 CHECK VALVESThe Tideflex ® TF-1 Curved Bill Check Valve is designed withenhanced sealing to improve headloss. The improved TF-1design allows the valve to handle long-term water weightwhile maintaining structural integrity. The spine is at agreater vertical angle, making it able to withstand thecantilever effect when water is flowing throughthe valve. The TF-1 is contructed ofrubber, making it immuneto rust, corrosion andweathering.SERIES 35-1 CHECK VALVES600 N. Bell Ave.Carnegie, PA 15106PHONE:412/279-0044FAX:412/279-7878www.tideflex.comThe flat-bottom Series 35-1 features an integral rubberflange, allowing them to be mounted to flanged outfallpipes or directly to headwalls where the pipe is flush.The flange size drilling conforms to ANSI B16.10,Class 150#, or can be constructed with DIN, 2632and other standards. The Series35-1 Check Valve is furnishedcomplete with steel or stainlesssteel backup rings for installation.The information presented in this catalog isprovided in good faith. Red Valve Company,Inc. and Tideflex ® Technologies reserves theright to modify or improve its designspecifications without notice and does notimply any guarantee or warranty for any ofits products from reliance upon theinformation contained herein. All orders aresubject to Red Valve Company, Inc. andTideflex ® Technologies’ standard terms andwarranty and are subject to final acceptanceby Red Valve Company, Inc. and Tideflex ®Technologies.Viton is a registered trademark of DuPontDow Elastomers. Hypalon is a registeredtrademark of DuPont PerformanceElastomers. Tideflex, Red Valve, and theRed Valve “rv” logo are registeredtrademarks of the Red Valve Company, Inc.SERIES 39 CHECK VALVESThe Tideflex ® Series 39 Inline Check Valve features afabric-reinforced elastomer check sleeve housed in a castiron body with ANSI 125/150 flanges, allowing for easyinstallation into any piping system. The valve’s operation issilent, non-slamming and maintenance free. Sliding,rotating, swinging and plunging parts are completelyeliminated. The body isequipped with flush portsand a clean-out port andcan be epoxy coated.© 2009 Red Valve Company.All rights reserved.RECYCLABLEPAPERCMCV 12/10