Service A-320 1st Stage.pdf - Apollo Sports

More documents

Recommendations

Info

DISASSEMBLYUnscrew and then remove theadjusting screw and spring (Turnanti-clockwise to unscrew)Using the bio adjusting spannerTL00008 unscrew the lock nut.(Turn anti-clockwise to unscrew)Remove the spring padA -<strong>320</strong>
DISASSEMBLYPlace a low pressure air nozzle against oneof the LP ports, use air pressure to lift thediaphragm off its seat.Apply pressure gently, and place a rag overthe top of the body to prevent the diaphragmfrom being blown out and possibly causingan injury.If you have no intention of using thediaphragm again it can be removed with apick. Make sure you do not scratch thesealing surface.Remove and inspect the diaphragm.Any sign of damage or creasing is cause forreplacement.A -<strong>320</strong>
Page 1 and 2: Technical ManualA-320 Balanced 1st
Page 3 and 4: Haapalainen Aarne Johannes s. 6.1.1
Page 5 and 6: DISASSEMBLYRemove the DIN fittingfr
Page 7: DISASSEMBLYHold the 1 st stage in a
Page 11 and 12: DISASSEMBLYPlace the HP module on a
Page 13 and 14: INSPECTION & CLEANINGCheck the HP s
Page 15 and 16: INSPECTION & CLEANINGA quick check
Page 17 and 18: ASSEMBLYHp Module AssemblyApart fro
Page 19 and 20: ASSEMBLYSit the retaining ring on t
Page 21 and 22: ASSEMBLYLightly lubricate the o rin
Page 23 and 24: ASSEMBLYUse your nylon drift (or yo
Page 25 and 26: ASSEMBLYReplace the adjusting screw
Page 27 and 28: ASSEMBLYAttach the Apollo low press
Page 29 and 30: ASSEMBLYUse a 6mm Allen key wrench
Page 31: ASSEMBLYThe first stage DIN or Yolk

Service A-320 1st Stage.pdf - Apollo Sports

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?