Service A-320 1st Stage.pdf - Apollo Sports

More documents

Recommendations

Info

DISASSEMBLYCarefully remove the filterretaining ring and then the filter.Remove the Yolk fittingfrom the 1 st Stage. Youcan use tool TL00006to do this.This is a stainless steel filter itcan be cleaned using anultrasonic cleaner MS20582.A -320
DISASSEMBLYHold the 1 st stage in a soft jawvice. Use old port plugs to avoidbody damage.Fit the Apollo adjusting wrenchTL0005 to the body cap.Use a 12” adjustable wrench,undo and lift off the body cap.Remove the piston assembly toexpose the adjusting assembly.A -320
Page 1 and 2: Technical ManualA-320 Balanced 1st
Page 3 and 4: Haapalainen Aarne Johannes s. 6.1.1
Page 5: DISASSEMBLYRemove the DIN fittingfr
Page 9 and 10: DISASSEMBLYPlace a low pressure air
Page 11 and 12: DISASSEMBLYPlace the HP module on a
Page 13 and 14: INSPECTION & CLEANINGCheck the HP s
Page 15 and 16: INSPECTION & CLEANINGA quick check
Page 17 and 18: ASSEMBLYHp Module AssemblyApart fro
Page 19 and 20: ASSEMBLYSit the retaining ring on t
Page 21 and 22: ASSEMBLYLightly lubricate the o rin
Page 23 and 24: ASSEMBLYUse your nylon drift (or yo
Page 25 and 26: ASSEMBLYReplace the adjusting screw
Page 27 and 28: ASSEMBLYAttach the Apollo low press
Page 29 and 30: ASSEMBLYUse a 6mm Allen key wrench
Page 31: ASSEMBLYThe first stage DIN or Yolk

Service A-320 1st Stage.pdf - Apollo Sports

Create successful ePaper yourself

Delete template?

Save as template?