Service A-320 1st Stage.pdf - Apollo Sports

More documents

Recommendations

Info

TOOLING REQUIREMENTS• 12” adjustable wrench• Apollo wrench No. TL00005• 4mm & 6mm Allen key (wrench)• Snap ring (circlip) pliers TL00000• O ring pick TL00013• Fine tweezers• Nylon dowel - 10mm dia.• Small screw driver. (blunt edges)• Threaded rod (7/16” NF) handle• Engineers vice with soft jaws• Line pressure test gauge• Ultrasonic Cleaner TL00047Additional standard engineeringtools will also be required.A -320
DISASSEMBLYRemove the DIN fittingfrom the 1 st StageRemove the stainless steelfilter from the housing byremoving the base o’ringThis is a stainless steel filter itcan be cleaned using anultrasonic cleaner MS20582.A -320
Page 1 and 2: Technical ManualA-320 Balanced 1st
Page 3: Haapalainen Aarne Johannes s. 6.1.1
Page 7 and 8: DISASSEMBLYHold the 1 st stage in a
Page 9 and 10: DISASSEMBLYPlace a low pressure air
Page 11 and 12: DISASSEMBLYPlace the HP module on a
Page 13 and 14: INSPECTION & CLEANINGCheck the HP s
Page 15 and 16: INSPECTION & CLEANINGA quick check
Page 17 and 18: ASSEMBLYHp Module AssemblyApart fro
Page 19 and 20: ASSEMBLYSit the retaining ring on t
Page 21 and 22: ASSEMBLYLightly lubricate the o rin
Page 23 and 24: ASSEMBLYUse your nylon drift (or yo
Page 25 and 26: ASSEMBLYReplace the adjusting screw
Page 27 and 28: ASSEMBLYAttach the Apollo low press
Page 29 and 30: ASSEMBLYUse a 6mm Allen key wrench
Page 31: ASSEMBLYThe first stage DIN or Yolk

Service A-320 1st Stage.pdf - Apollo Sports

Create successful ePaper yourself

Delete template?

Save as template?