Service A-320 1st Stage.pdf - Apollo Sports

More documents

Recommendations

Info

ASSEMBLYThe lubrication of parts, o rings and threads, for Apollo regulatorsis carried out using either Christo-lube or Silicone grease.NOTE:The use of Christo-lube throughout the regulator DOES NOT constitutea regulator approved for use with Nitrox or O2 enriched Breathing Air.Other procedures (NOT covered by this manual) MUST be carriedout prior to use with mixed gases other than standard air.LUBRICATION.STATIC O RINGSMust be lightly lubricated.Wipe off any excess lubricantprior to assembly.DYNAMIC O RINGSCan be liberally lubricated.Do not wipe off excess lubricant.Ensure excess lubricant DOES NOTenter the breathing air passages.A -320
ASSEMBLYHp Module AssemblyApart from all parts being available individually.Apollo have a spare parts kit available for this 1 ststage code SP00011.The kit does not include theHP seat or filter.Replace the balance chamber o ringby using your fine tweezers as shown.The o ring must sit on top of the Teflon washerPlace the HP module, on the bench andfit the HP seat, polyurethane face down.A -320
Page 1 and 2: Technical ManualA-320 Balanced 1st
Page 3 and 4: Haapalainen Aarne Johannes s. 6.1.1
Page 5 and 6: DISASSEMBLYRemove the DIN fittingfr
Page 7 and 8: DISASSEMBLYHold the 1 st stage in a
Page 9 and 10: DISASSEMBLYPlace a low pressure air
Page 11 and 12: DISASSEMBLYPlace the HP module on a
Page 13 and 14: INSPECTION & CLEANINGCheck the HP s
Page 15: INSPECTION & CLEANINGA quick check
Page 19 and 20: ASSEMBLYSit the retaining ring on t
Page 21 and 22: ASSEMBLYLightly lubricate the o rin
Page 23 and 24: ASSEMBLYUse your nylon drift (or yo
Page 25 and 26: ASSEMBLYReplace the adjusting screw
Page 27 and 28: ASSEMBLYAttach the Apollo low press
Page 29 and 30: ASSEMBLYUse a 6mm Allen key wrench
Page 31: ASSEMBLYThe first stage DIN or Yolk

Service A-320 1st Stage.pdf - Apollo Sports

Create successful ePaper yourself

Delete template?

Save as template?