Fairfield Auctions Fairfield Auctions

CNC HORIZONTAL TABLE TYPE BORING MACHINESGiddings & Lewis Model G60,6"(152mm) spindle, Wide Bed, GLF800 Control , Main Table 170" x72"(4318 x 1830mm) X,Y,Z= 4267 x3050 x 2500mm, speeds to 1100rpm,S/No.450-1074(Unless previously soldby private treaty)Giddings & Lewis Model G60,6"(152mm) spindle, Wide Bed, GLF800 Control, Main table 168" x72"(4267 x 1830mm), X,Y,Z= 4267 x3050 x 2500mm, speeds to 1100rpm,S/No.450-1037(Unless previously soldby private treaty)Giddings & Lewis Model G60,6" (152mm) spindle, Wide Bed,GLF 800 Control, Main table 120"x 72" (3048 x 1828mm) X,Y,Z=3048 x 2438 x 1220mm, speedsto 1100rpm, S/No.450-1012(Unless previously sold byprivate treaty)6

CNC HORIZONTAL TABLE TYPE BORING MACHINESGiddings & Lewis Model 70A-G5T, 5" (127mm)spindle, Wide Bed, GLF 8000 series Control, Maintable 146" x 60"(3708 x 1524mm), X,Y,Z= 3352 x2133 x 1524mm, speeds to 1100rpm, S/No.410-1014 (retrofitted & rebuilt 1992) (Unless previouslysold by private treaty)ALSO:Giddings & Lewis Model A110RT, 4.3"(110mm) G & L CNC Control, Rotary table1250 x 1220mm, X,Y,Z 1500 x 1000 x1000mm, speeds 7 –1340 rpm, S/No.150-1577Scharmann ModelFB500 Repromat125mm spindle,Siemens 850 5 axisCNC Control,Rotating Table 1600 x1200mm,X,Y,Z=1600 x 1600 x1600mm, speedsto1000rpm,Retrofitted 1998.(Unless previouslysold by private treaty)ROTARY TABLESALSO:2No.Giddings & Lewis 9’ x 7’(2740 x 2130mm) Hydrostatic2No. Giddings & Lewis 8’ x 5’(2440 x 1520mm) Air Lift.2No. Giddings & Lewis 5’ x 3’(1520 x 910mm) Air Lift.Noble & Lund Heavy Duty Powered 2740 x 2740mm withtraverse, approx 80 ton max table load.Noble & Lund Heavy Duty Powered 3050 x 3050mm, withtraverse 1220mm, Table loading 35 ton,Noble & Lund Powered 2770 x 2770mm.Manual Quartering Table 2130 x 2130mm.7

CNC MACHINESDahlih Model MCV1350 ModelVertical Machining Centre, FanucOM Control, Table 1700 x820mm, X,Y,Z= 1100 x 630 x700mm, 24 pos. ATC, Spindlespeeds to 3500rpm, BT50 taper,S/No.19500AH. 1991.Beaver Model VC-55H VVertical Machining Centre,Heidenhain TNC-355Control, Table 900 x400mm, X,Y,Z= 775 x 600 x450mm, 30 pos. ATC, BT40taper, S/No.16106. 1991.Cincinnati Model 502-C-16 CNCSlant Bed lathe, Siemens 810 CNCControl, swing over carriage 711mmdia, swing over slide 482mm dia, 8station turret, Recon & retrofitted1995.ALSO:Cincinnati Model 502-U-12 NCSlant Bed lathe, Acramatic 10EControl, swing over carriage610mm dia, swing over slide330mm dia, Distance betweencentres 1980mm,8

VERTICAL BORING MACHINESBerthiez Model BM225 SingleColumn Elevating Rail, Displaceabletable 2800mm dia., Max swing4500mm dia. Max height under rail3000mm, Speeds 0.8-125rpmScrewcutting, Side head, copying,Cylinder boring attachment,Turnvision DRO, S/No.200265-01(Unless previously sold by privatetreaty)Toshiba Shibaura TypeTSS20/40A Elevating Rail,Displaceable table 2000mm dia,Max swing 4000mm, max underrail1730mm, side head, speeds3.2 – 100 rpm, copying, DRO,S/No.120 (1980) (Unlesspreviously sold by private treaty)9

VERTICAL BORING MACHINESWebster & Bennett 120" (3048mm) Double Column Elevating Rail, Table 3048mmdia. Speeds 1.5-39.5 rpm, Acu-Rite Turnvision DRO, S/No.6826-1(Unless previously soldby private treaty)2No.Webster &Bennett 108"(2745mm) DoubleColumn Elevating Rail,Table 2745mm dia.Speeds 1.5 – 39.5 rpm,Acu-Rite TurnvisionDRO, S/No.6083-1 &6072-110

VERTICAL AND HORIZONTAL BORING MACHINESWebster &Bennett72"(1828mm)EM SingleColumnElevating Rail,Max swing2133mm,1524mmunder rail,speeds 1.9-41.5rpm,DRO,S/No.5827-42No.Webster & Bennett 48"(1220mm) EV Single Column,1220mm under rail, speeds 10.5-234rpm, Coolant, S/Nos. 6797-3 &6797-2Scharmann FB500 Repromat Table Type,125mm spindle, 700mm dia Facing head,Rotating table 1600 x 1200mm, Speeds to1000rpm, S/No.66.151.134ALSO:Webster & Bennett 48" (1220mm) R SeriesSingle Column Elevating Rail, speeds8.4 – 187 rpm, electronic copying.Webster & Bennett 48" (1220mm) M typeSingle Column, speeds .7 – 70 rpm, DROWebster & Bennett 36" (910mm)EV Single Column, 1000mm under rail,speeds 10.5 - 234rpm, Coolant, S/No. 6803-5Asquith 6" (152mm) Ram TypeHorizontal Floor Type, X,Y,Z= 14000x 5180mm x 910mm ram travel,Spindle travel 1220mm, UniversalMilling head, Floor plates.Sip Model MP5-F Double Column Vertical Jig Borer, Table 1000 x 800mm, Sip rotary table 800mmdia. Tooling, S/No.1137Asquith 5" (127mm) Ram Type Horizontal Floor Type, X,Y,Z= 12500 x 3650 x 760mm ram travel,Spindle travel 1060mm, Rotary table 1830 x 1830mm, Floor plates, S/No.2077311

GEAR MACHINESSchiess ModelRFW10S PrecisionHorizontal Pinionand Gear HobbingMachine for TurbineReduction Gears,max gear cut1400mm dia, Maxhelix angle 45degrees, Max pitch12mod, Saddletraverse 1830mm,Max length of workadmitted 3000mm,Qty of change gears& hobbs.S/No.46020(Unlesspreviously sold byprivate treaty)Maag Model PH100 Gear TestingMachine, Min/Max traceable profileModule 1-20, Min /Max base circles 200-1000mm, electric recording head,S/No.8837Churchill Model PH2415 Universal GearHobbing Machine, Max workpiece 610mmdia, Max height 770mm, Table 520mmdia. S/No.13502-73-4Churchill Model GS30 Gear ShavingMachine with crowning, Max gear 760mmdia, Max dist BC 760mm, Max cutterstroke 230mm.Sykes Model 3C Gear Generator, Maxgear dia, 1000mm, Setup for internalgears, S/No.2714/3ALSO:David Brown 48" (1250mm) Horizontal Turbine Wheel Shaving Machine, Min/Max dia ofgear 112/1250mm, Max weight of workpiece 13 tons, S/No.488National Broach Model GCM48 Pinion & Gear Hobbing Machine Max swing 1250mmdia. x 2743mm, speeds 20-315rpm, S/No.GCM-830Klingelnberg Model AGW30A Automatic Hob Sharpening Machine, Max dia 300mm,Max grinding stroke 400mm, with dust extractor, S/No.42513-564412

GRINDING MACHINESJones & ShipmanModel 540Horizontal SpindleSurface Grinder,S/No.34003W224Churchill Model FA 30" x 144" (762mm dia x3650mm BC) Cylindrical Grinder with internalspindle. Wheel size 660mm dia x 75mmwide(Unless previously sold by private treaty)Snow Vertical Spindle Surface Grinder, Table2450mm x 380mm, wheel 460mm dia,Abwood ModelHS5025Horizontal spindleSurface Grinder,Mag chuck 500 x200mm, Papercoolant clarifier,S/No.76AMatrix Okuma Model GP33x1650 PlainCylindrical, 330mm dia x 1625 BC, Plunge Feed.Churchill HuntDG100 Drill Grinder,cap 100mm dia. Setof bushes, (1986)rick Modelm to 100mmALSO:Cincinnati No.2 Tool & Cutter Grinder, S/No.6211-21Newall (Keighly) Model KU12 300mm x 940mm BCUniversal Cylindrical Grinder, Drop down internalattach., Double swivel, Plunge, S/No.74KU3525Jones & Shipman Model 1014 Universal Grinder 200x 610mm BC, Internal spindleCincinnati Monoset Tool & Cutter Grinder, S/No.78-280177Churchill Model CW 320mm dia x 1930mm BC PlainCylindrical with steadies.Churchill 200 x 900mmBC Plain CylindricalLandis Lund Plain Cylindrical 460mm dia x 3050mm BC,Steadies etc.Dormer Model 100 Drill Grinder. Cap 8-90mm dia, S/No.413Dormer Model 84 Drill Grinder,S/No.CP613Heavy Duty Double Ended Pedestal GrindersGrief Type DV 30-2, 100mm Backstand Linisher.Rank Taylor Hobson Model G Bench Cutter Grinder13

LATHESLang Electrofeed 25D SS & SC gap bed CentreLathe, swing over bed 610mm dia x 5180mm BC,speeds 8.3 – 735rpm, Copying, power to topslide, S/No.64H08Broadbent V Series 1100D SS & SC Gap BedCentre Lathe, swing over bed/cross slide1100/850mm dia. x 2500mm BC, swing in gap1650mm dia, speeds 4.5 – 500 rpm, 4 jawchuck, steadies, S/No.8809-76Lang SS & SC straight bed Centre Lathe swingover bed/cross slide 920/770mm dia, x 2430mmBC, speeds 7 – 275rpm, 4 jaw chuck, fixed steady,S/No.362712No.Graziano Model SAG22 SS & SC StraightVee bed Centre Lathes, swing over bed 660mmdia, x 1000mm BC, speeds 30-1500rpm, TaperTurning attach. to 1 m/c.ALSO:Lang Electrofeed 580mm dia x 2000mm BCstraight bed Centre Lathe, Speeds 20-1639rpm, 3 & 4 Jaw chucks, steadies.Lang Electrofeed 480mm dia x 1250mmBC straight bed Centre Lathe, Speeds30-2483rpm, Taper turning, 3 jaw chuck.Graziano Model SAG22 SS & SC Straightbed Centre Lathe, swing over bed 750mmdia x 2000mm BC, speeds 30-1500rpm,Meuser Model MIL-40937 430mm dia x1525mm BC, Speeds 28 – 1250 rpm, 3 & 4jaw chucks.Herbert No.5 Senior Pre-optive CapstanLathe, Power collet chuck, S/No.14-12658Herbert No.5 Senior Pre-optive CapstanLathe, collet chuck & Barfeed.Holbrook Model H-15 SS & SC Straightbed Centre Lathe, swing over bed/cross slide400/320mm dia, speeds 15 –1000rpm,taper turning, S/No.437-14Colchester Bantam 280mm dia x 685mmBC, speeds to 800rpmColchester Student 1200 gap bed CentreLathe 304mm dia x 610mm BC, Taperturning14

MILLING & DRILLING MACHINES2No.Schaublin Model 53NHigh Precision UniversalToolroom with swivel verticalhead, Table 1100 x 305mm,Speeds 38-1510rpm,spindle taper 40ISO, S/Nos283331 & 283332.Cincinnati 205-12MIVertical, table 1400 x304mm, speeds to 1500rpm, S/No.2J2V5RE-22Mas Model VR84A 15’( 4600mm) RadialDrill, No.6MT, 9-1400 rpm,S/No.156130213.Huron Model MU6Universal, table 2000 x457mm, Speeds30 – 2066rpm, 40 ISO.2No. Asquith 7’(2100mm) Portable RadialDrills, No.5MT, 22-500rpm, Rebuilt 1992.Asquith Archdale Model 4PT-14-54, 4’6"(1400mm) Radial Drill, No5MT, 9.5-1560rpm.Kitchen & Walker Twin HeadHeavy Duty Pedestal Drill, 5MT, Dist.Between spindles 914 – 2590mm.ALSO:Cincinnati No.3U Universal, table1570 x 380mm, Speeds 18-1300rpm,with vertical head.Cincinnati Model 207MK Universal,table 1358 x 298mm,speeds 25 – 500 rpm,Asquith Archdale 39" 1000mmRadial Drill, R & F Table, No 3MT,132-1660 rpm.Archdale 8’ (2440mm) Radial Drill, No.5MT, 11-1450 rpm.Asquith 8’( 2438mm) Portable Radial Drill, No.4MT, Speeds to 500 rpm,2No.Asquith 5’9" (1750mm) Portable Radial Drills, No.5MT, Reconditioned1992.Stanko Model 2M55, 5’ 8" (1750mm) Radial Drill, No.5MT, 20-2000rpm,Kitchen & Wade H6 Horizontal Drilling & Milling Machine, No6MT, X,Y=3700mm x 2600mm, Floor plates.Kitchen & Wade H3 Horizontal Drill, No.5MT, X,Y= 5000 x 4370mm.Kitchen & Wade H3 Horizontal Drill, No.5MT, X,Y= 2500 x 1600mm.Q & S Drillmaster Model QDM32 Pillar drill, Table 500 x 300mm, Speeds to1500 rpm, Cap 32mm dia, Power feed.Pedestal & Bench Drills by Herbert, Meddings, Ajax & Archdale.15

TUBE MANIPULATION EQUIPMENTPines Model No.66"(150mm) capHydraulic Tube Benderwith degree & plane ofbend facility,Compression booster,Range of tooling to 6"dia, Digital displayunits, S/No.11690-79-316. (1980) (Unlesspreviously sold byprivate treaty)Anglia CB76 TubeBending Machine, 76mmcap, S/No.0182-5-93(1993)Staffa Pedrick Model PB7.5 25mm to 75mm TubeBender with formers.Alyn Tube End Profiling Machine, Max size of tube370mm dia.ALSO:Tubella H3M Pipe Bender 13mm – 75mm dia with formersHilgar Type 114BD 100mm Pipe Bender, Plane & Degree ofbend, Tooling.4No. Staffa Portable Tube Benders 3/16" to 2"Staffa Pedrick Model PD10 25mm to 100mm Tube Benderwith formersVernon Model G Pipe Profiling Machine, Cap 50 – 610mm x12mm, Vernon pantagraph control, Linatrol tracing head,1982.Alyn Tube End Profiling Machine, Max size of tube 370mm dia.Heap Model UT Pipe Screwing Machine _" to 4"Lang Pipe Bevelling Lathe, Max cap 250mm dia approx.Heap 4" UT Pipe end Bevelling MachineStaffa PedPD10 25m16

FABRICATION EQUIPMENTBeyeler EdwardsPearson Model 450 x6600 RT4, 450 Ton x6600mm 7 Axis CNCDownstroking HydraulicPressbrake with CybelecPresscad 900 CNCControl, Tool Magazinewith qty of tooling,S/No.95P171 (1995)Edwards Pearson Model VE 04 3080 x 13mmHydraulic Guillotine with CNC High speed powerbackgauge, New 1996Pearson 12’ x 1 /2" (3650 x 13mm) HydraulicGuillotine, PBG, RBGA,S/No.5426MubeaModel KBL65-30 OptimaUniversalIronworker130 x 12mmangles.Steco Type SBM3/HYD Section Rolling Machinewith guide rolls.17

FABRICATION EQUIPMENTSMT Pullmax Kumla CNC 2500 x 10mmDouble Pinch Bending Rolls, 1986Hugh Smith 1200 ton x 3700mm RollPress with spare roll, elec hoist,S/No.C26769 (Unless previously sold byprivate treaty)Fritz Muller 900 ton 4column HydraulicPress,Bed area 3100 x2250mm, Ram face2530 x 1270mm, Maxdaylight 1250mm, DistBetween columns 3842x 1473mm. (Unlesspreviously sold byprivate treaty)Hugh Smith250 ton openfronted ‘C’Frame HydraulicPress, Bed 2438x 914mm,Throat 610mmheight underram1117mm,ALSO:Pearson 10’ x 1 /2" (3048mm x 13mm) Hydraulic Guillotine,Power Backgauge, Rapid blade gap adjustment,S/No.655205/4Pearson 8’ x 1" (2438 x 25mm) Hydraulic Guillotine, PowerBackgauge, Rapid blade gap adjustment, Increased gapdepth 660mm, S/No.4887Pearson 8’ x 1 /2" (2438 x 6.5mm) Hydraulic Guillotine,P.B.G. S/No.5352/1Steco Pyramid Bending Rolls 1800mm x 10mm , Drop end.Craig & Donald Mechanical Bulldozer HorizontalStraightening PressBronx 50ton x 2500mm Hydraulic Upstroking Pressbrake,LightguardsEdwards 1850mm x 130mm Hand Bending Rolls,Keetona 1260mm Straight Folder, Heavy Duty Bench Shear& Angle Cropper.SMT Pullmax Plate Nibbling Machine 1100mm throat.Pearson 155 ton x 12’3” (3733mm) HydraulicDownstroking Pressbrake, Tooling & lightguards,S/No.5339/118

CNC PROFILE AND PLASMA PUNCHING MACHINESMesser GrieshamModel C7500P CNCPlasma/Propane 4Head Profile Burnerwith MG. KS20 CNCControl, 2No.Hypertherm HT2000Power sources, TorritFume extraction,Cutting area max 15mx 6.8m, 2No. Burningtables each 6.5m x4.2m, S/No.1805448(1988) Retrofitted1994. (Unlesspreviously sold byprivate treaty)Whitney Model661-232 CNCPanelmatic SheetMetal Punching &Plasma CuttingMachine withNUM1060 CNCControls, Max sheetwidth 2000mm,S/No.661-962-36811 (1981)(retrofitted 1997)(Unless previouslysold by private treaty)19

20WELDING EQUIPMENT

WELDING EQUIPMENTBode Model VP35, 35ton capacity WeldingPositioner, table size 2960mm, Tilts 110 degrees,S/No.M30338, Bode Model VP3 WeldingPositioner, 15240 Kg cap., Lambert Jouty P404000kg Positioner, Met-Vic 2 ton Positioner, 2No.Murex C4000 Positioner, cap. 1818 kg, MPEYates HD100 & HD200 Positioners cap. 5123 &11515kg, Bode M/VP/15 Positioner, cap15000kg, 2 Pairs Murex TR30 & TR60 Rotators,2 Pairs Heavy Duty Rotators 120 & 150 ton cap,Ross Column & Boom 6000mm x 4500mmhorizontal with Esab LAD1000 Power source, EsabA6 head, Rotating column, 14No.NedermanWelding Fume EliminatorsWELDING SETSWelding sets by BOC Transarc, Cromp-ArcStud, Rowen Arc, Phillips, Murex Transmig,Aga, Esab, Lincoln, Arcos, Miller Deltaweld,Oerlikon, BOC Rover TDC150, Citoarc TAC356,L-Tec, Fronius, Citoarc MS500, SciakySuspended Spot, Thermal Dynamics PAK10XR &PAK5XR , Cebora , Hypertherm, WTC EconocutSAF Nertajet Plasma cutters, 21No. Arc WeldingTransformers,21

FURNACESCooperheat Bogie Hearth StressRelieving Furnace 7160 x 4420 x2745mm high, 1981.Priest GasFired StressRelieving Oven,1200 x 760 x840mminternaldimensions, 4burners,Honeywellchart recorder.SAWING MACHINESSAWING MACHINESPehaka 270mm HorizontalBandsaw, Pedrazolli SuperBrown Special Cut Off Saw300mm blade, StartriteMetora Model HMB400Horizontal cap 400mm dia,Mega BS400SA HorizontalBandsaw, 400mm cap, 1990,Pehaka Model HS260Horizontal Bandsaw 1990,Rusch GS250 HorizontalBandsaw, Rusch S250Horizontal Bandsaw, RuschHB/SA 250 AutomaticHorizontal Bandsaw 250mmcap., S/No.851012, ForteSBA241 Automatic HorizontalBandsaw 250mm cap,S/No.1600, Utting 300mmcap Horizontal Bandsaw, Do-All Model V36 VerticalBandsaw, Startrite 18V10Vertical Bandsaw, RecordModel RPBS791 150mm diacap Bench Type PulldownBandsaw, Noble & Lund11/60 Circular SawSharpener,Radiac Abrasive Disc Cut offMachine, 355mm dia disc.22

TEE SLOTTED FLOORPLATES64 No. Various tee slotted floorplates from 2125 x 1530mm up tomatched sets making areas up to11000 x 5180mm.PORTAGE TABLES AND INSPECTION EQUIPMENTPortage Model 72A Measuring Machinewith table 6080 x 4570mm, squared250mmPortage Model 48 Measuring Machinewith table 6110 x 3060mm, squared250mmPortage Model 36A MeasuringMachine, table 3550 x1270mm, squared 254mmSip Precision MeasuringMachineNikon ProjectorQuantity of assorted inspectionequipment23

COMPRESSORS AND GENERATORPetbow Type S.475JA4Diesel Engined StandbyGenerator, output 594kVA, 415 V 830 A,Dorman 20TCA V12Turbocharged Engine.ALSO:Ingersoll Rand Type XLE Air Compressor, SWP 7 bar, 165 kW motor.Atlas Copco Type DT4E V4 Cylinder Air Compressor, SWP 125 psi, Motor 125hp,Ingersoll Rand Type Euro 10, Receiver Mounted Air CompressorTwin V2 Cylinder Receiver Mounted Air Compressor.Ingersoll Rand Type 30,2 stage Receiver Mounted Air Compressor, motor 15kW.Ingersoll Rand CentracII type 1-C11RX60-0 2stage water cooledcentrifugal AirCompressor, Schorch480kW motor, capacity60 cu.meters per min.S/No.V-60RAC134-1(1982)24

FORKLIFT TRUCKS AND CRANESNissan Model UGF03A 40U LPG 8100kg cap, HysterModel S500 LPG 5500lbs cap, Clarke Model EC50050F Battery electric 2500kg cap, side shift, ClarkeModel C500 Y50 LPG 4500lbs cap, side shift,Ransome Model L60D Battery electric, 6700lbs cap,Henley Hawk 06W LPG, 8000lbs cap, HysterModel S125A LPG 12500lbs cap, BT TypeBTLSV1000/7 Battery electric stand on 1000kg cap.Clarke Model C500 120 LPG 5440kg cap. NissanModel BGF03A4OU LPG 3895kg cap,double tyres.Nissan Model CRGH02F-35U LPG 3255kg cap sideshift, 50 No. Overhead Travelling Cranes from2 ton to 130 ton to 1990, Also Swivel JibCranes.25

MOBILE PLANTColes 10 ton Mobile Crane,30’ jib, Ford petrol engine,Coles 12 ton Telescopic LorryMounted Crane, RegNo.NKN 238F, Iron FairySapphire 10 ton MobileCrane, Jones Model 565Mobile Crane 18.3 tonscap.,Tennant Model 186 LPGPedestrian controlled FloorSweeper, 1994. PalletTrucks, Ransome Batteryelectric Tow tractor,American Lincoln Model575-100 Battery electric rideon floor cleaner, Batteryelectric pedestrian pallettrucks, Genie Model Z-30/20HD Battery ElectricMobile Boom type AccessPlatform Lift height 9450mm,RSC Model RSC6000 DieselTowing Tractor, 4No. BEV 2ton Electric Platform Trucks,MISCELLANEOUS26

MISCELLANEOUSQty of Power Tranformers 500kVA – 1500kVA, Skid Mounted ElectricalStarter test unit 11000/6600V, Industrial VacAir mobile sump cleaner, 20’and 7No. 10’ Steel shipping containers, Shotblast chamber with shotrecovery & filtration, 3No. Mobile inflammables storage cabinets, AbrasiveDevelopments wet blast cleaning cabinet, Karcher Model HDS 699 MobileSteam Cleaner, Freddy Model 3148 sump cleaner, Straight Line GasCutters, Magnaflux KH10-MkII magnetic crack detector, Banding machine,Scaffolding towers, Polstore cabinets, Marking off tables, Craneweighing scales, up to 100 ton Wheeler 10 ton cap. 4 pad Vacuum PlateLifter, Epco 1 ton cap hydraulic Engine Lifter, Herbert utility head, Rigid300 Vitolic Rolling Machine for vitolic joints 1" – 16" dia. Hydraulic test rigs,Heap Model URM Screwing Machine 1 /4"-6" pipes, M6-M64 Bolts, TeledyneLandis Model 4CST Screwing Machine, S/No.9711, 2No.Taylor HobsonModel K 2 dimensional Engravers, Ingersoll Rand Hydraulic Torque drivepower packs, Drills, Taps, Reamers, Milling cutters, vices, Large qty ofinspection equipment, General workshop equipment, Full CanteenFacility, Office Furniture & Equipment.27

Town House HotelHughenden RoadGlasgow G12Tel: +44 (0) 141 3570862Hotel AccommodationJurys GlasgowGreat Western RoadGlasgow G12 0XPTel: +44 (0) 141 3348161Directions to The WorksManor Park Hotel28 Balshagray DriveGlasgow, G11 7, ScotlandTel: +44 (0) 141-3392143From the M8 (Westbound)● Exit the M8 at junction 19, joining the A814(signposted to Clydebank, SEC, A814)● Follow the 814 towards Clydebank● After passing over the junction with the A739,continue on the A814 (Dumbarton Road)towards Clydebank for approximately 3 miles● John Brown Engineering is located on the lefthand side after the traffic lights (see inset)●●●●●●●●From Glasgow City CentreFollow the A82(Great Western Road) towardsDumbartonWhen approaching Clydebank, take the firstexit at the roundabout onto the B8055(Drumry Road) (see inset)Turn left at the junction with the A8014(Kilbowie Road)Turn left at next lights (Montrose Street),follow road straight until traffic lights onA184 (Dumbarton Road) and turn rightJohn Brown Engineering is located on the lefthand side.From Glasgow AirportJoin the M8 at junction 25 (signposted toClyde Tunnel, A739) joining the A739 towardsthe Clyde TunnelAfter exiting the Clyde Tunnel, take thesecond slip road off to join the A184(Dumbarton Road(, following signs toClydebank and Dumbarton for approximately3 miles.John Brown Engineering is located on the lefthand side after the traffic lights (see inset)By Train● Clydebank and Singer stations are on the Helensburgh /● Dalmuir line and can be reached from Glasgow QueenStreet Station and Central Station● For further train service information, telephone theNational Rail Enquiry Line on 0345 48 49 50.Fairfield AuctionsPO Box South Bank 16, Sotherby Road, Skippers Lane Industrial Estate,South Bank, Middlesbrough, Cleveland, TS6 6LP, EnglandTelephone: +44 (0)1642 457461 Fax: +44 (0)1642 440141Internet: www.fairfield auctions.co.ukE-mail: info@fairfieldauctions.co.ukGooimeer 6/30, 1411 DD Naarden,The NetherlandsTelephone: +31 (0) 35 699 6363 Fax: +31 (0) 35 699 6366Internet: www.dovebid.comE-mail: dovebid.europe@dovebid.com