Cardell MAX-12 HD - Veterinary Instrumentation

Cardell® MAX-12HD User’s ManualSECTION 13IBP MONITORING (Optional)13.1 General InformationThe device displays the maximum systolic pressure, minimum diastolicpressure, mean pressure and an IBP waveform. The IBP waveform can beobserved in different channels, and the waveform speed is the same as that ofthe ECG waveform. In the IBP waveform channel, there is a scale on the topand at the bottom, and at the right end of the line, the IBP reading isdisplayed.NOTE: For a thorough discussion, see Appendix 4; Direct Blood PressureMonitoring, by Marc R. Raffe DVM, MS, DACVA, DACVECC, IVECCSproceedings.13.2 TransducerIBP transducers provided are in conformity with ANSI/AAMIBP23-1986standards and with sensitivity 5uV/V/mmHg. Check transducer cable beforeconnecting it to the device.WARNING:The disposable transducer is for single use only. Never attemptto reuse the parts. Discard the used transducers properly.Transducer zeroing is very important for accurate measurement. So zeroingshould be performed regularly.1. When the screen prompts “ Please do calibration”, user may enter IBPSetup to give command:Main Menu →Rotate the knob→ IBP1/2 →Press the knob→ ZeroingMode → Press the knob96 M1.0 5-15-09