Cardell MAX-12 HD - Veterinary Instrumentation

CARDELL® MAX-12HD User’s ManualUser can activate alarm function and setup alarm limits one by one.Main Menu →Rotate the knob→ NIBP →Press the knob→Rotate the knob→SYS-DIA alarm →Press the knob→Rotate the knob→Press the knobAdjust parameter rangeParameterSYS Upper LimitSYS Lower LimitDIA Upper LimitDIA Lower LimitSYS-DIA AlarmAlarm rangelower limit-254 (mmHg)30-upper limit (mmHg)lower limit-220 (mmHg)10-upper limit (mmHg)0-40 (mmHg)The Alarm trigger when the following abnormal events occur and messageswill be displayed in the NIBP parameter area: “Cuff loose”, “Cuff notconnected”, “Cuff position error”, “Overpressure protection”, “Measurementout of limits” or “Measurement error”. Take the following steps after seeingthe messages:1. Cuff is too loose, not connected or applied to a wrong positionIf the NIBP parameter area displays “Cuff loose” or “Cuff not connected” or“Cuff position error”, please check the position of the cuff first, and checkwhether the inflation hose is damaged.2. Overpressure ProtectionIf the NIBP parameter area displays“Overpressure protection,” it indicatesthat the internal inflation circuit results in an NIBP measurement failure.Please contact Midmark for service.3. Measurement Pressure out of LimitIf the NIBP parameter area displays “Measurement Pressure out of limit”, itis because the patient’s blood pressure is extremely high and out of themeasurement range of the patient monitor. Calm the patient down andperform the measurement again.M1.0 5-15-0983