Cardell MAX-12 HD - Veterinary Instrumentation

CARDELL® MAX-12HD User’s Manual(Silence) will become invalid. The low battery power alarm is not affectedby Silence key. It will always alarm whenever battery power is low.(2)To turn on or off alarm sound, operate the knob as follows,on/off →→ Rotate the Knob→ Alarm Setup → Press the Knob → AlarmPress the Knob→ On/Off →Rotate the Knob →Press the KnobWhen alarm is off (disabled), you will not hear any sound when new alarmevents occur. Alarm can be enabled through the alarm setup menu or pressingthe Silence key on the front panel.4.3 Alarm Limits SetupAlarm limits include upper and lower limits that are user adjustable.The alarm setup for each parameter can be found in the respective parametersetup menus. In the main menu, rotate the knob to select the parameter andpress the knob to confirm. Rotate the knob again to look for the soft key andpress the knob. The original alarm reading turns into yellow. Now turn theknob left or right, you may increase or decrease the limit until desired limit isobtained. Then press the knob to confirm.In the NIBP setup menu, there is SYS-DIA Alarm limit, with range from 0 to40mmHg. The system default is 20 mmHg and will be saved after power off.If the monitor detects that the difference between the SYS and DIA values arelower than this limit, the system will give an emergency alarm.Note: After parameter alarm limits are set, they will remain in the systemM1.0 5-15-0927