Cardell MAX-12 HD - Veterinary Instrumentation

CARDELL® MAX-12HD User’s Manualplugged into AC power.WARNING: Even when the device is not on, battery power will bedischarged slowly.3.4 Before MonitoringBefore monitoring a patient, please check the following:Check if there is any mechanical damage.Check the external connections.Check if the patient monitor is in good working condition.Warning: If anything is found abnormal or mechanical damage is apparent,please don’t use it, and contact Midmark.Step 1: After power on, the system will start self-test. If the self-test issuccessful, then start monitoring your patient. If changes are to be made inthe operation or settings, see the Operation Procedures.Step 2: Make sure the patient monitor is connected to the patient through theaccessories.Step 3: Attach probe and transducer to the patient.Note: The monitor can be used for a single patient at one time.M1.0 5-15-0921