SPRAY GUNS

SPRAY GUNS88Choice of MaterialsSprayand CapacitiesGunsSPRAY GUNSFor spot spraying, tree spraying,livestock spraying and power washingat GunJet pressures Number from AA2Spray 30 to 800 Guns PSI.To Length operate 24, spray weight gun, 31⁄2 handle pounds, is rotated brass. 3/4 360° garden from hose shutoff thread to (F) inletmaximum connection. flow Also position. available As handle in aluminum is turned, as GunJet spray changes AA2-AL, from weightFor initial 11/4 spot pounds. cone spraying, through tree intermediate spraying, cone spray to straightlivestock stream. Spray spraying tips are interchangeable and power washingorifice discs made ofGunJet corrosionatpressuresNumber and erosion-resistantfromAA143 stainless steel.30 to 800 PSI.Length 22 1/4”, weight 1 1/4 pounds and only available inTo operate spray gun, handle is rotated 360° from shutoff toaluminum. maximum Choice flow Inlets of position. Materials are available As handle and with is turned, Capacities3/4” or spray GH changes (Garden from Hose)female initial GunJet cone threads. spray Number through AA2A intermediate cone spray to straightstream. Length Spray 15, tips weight are interchangeable 21/2 pounds, brass. orifice 3/4 garden discs made hose thread of (F) inletcorrosion- Part# connection. and erosion-resistant Also available in Inlet aluminum stainless steel. as GunJet AA2A-AL, Price weight1 pound. Same design as GunJet AA2.AA143-AL-3/4-6Choice GunJet of Number Materials AA2 3/4” Inlet $94.00and CapacitiesAA143-AL-GH-6 Length 24, weight 31⁄2 pounds, Garden brass. 3/4 Hose garden Inlet hose thread $94.00 (F) inletconnection. Also available in aluminum as GunJet liquid AA2-AL, pressure weight iN psi11/4GuNJeTpounds.perfOrMANCeNuMberOrifiCedisCNuMberGunJet GunJet Number Trigger AA2 Adapter AA46100 psi 800 psiA C A CCapacity – GPM .53 .90 1.5 2.5AA2-20AY-SSLength 24, weight 2031⁄2 pounds, Max. Vert. brass. Throw 3/4 – ft. garden — hose 25 thread —(F) inlet 33connection. Max. Horiz. Throw – ft. 6 35 8 42Part#AlsoDescriptionavailable in aluminum as GunJetPriceAA2-AL, weight11/4 Capacity – GPM .79 1.4 2.2 4.0GunJet pounds. NumberAA2-30AY-SS AA2AAA46 30Max. Vert. Throw – ft. — 27 — 34Length 15, weight Trigger 21/2 pounds, Adapter brass. 3/4 garden N/Ahose thread (F) inletMax. Horiz. Throw – ft. 7 38 9 45connection. Also available in aluminum as GunJet AA2A-AL, weightReplacement Capacity Parts – GPM Only 1.2 2.3 3.4 6.51 pound. SameAA2-45AY-SS design as GunJet AA2.45Max. Vert. Throw – ft. — 30 — 36Max. Horiz. Throw – ft. 8 41 9 48GunJet Number AA2A Capacity – GPM 1.6 3.6 4.5 10AA2-60AY-SSliquid pressure iN psiLength 15, weight OrifiCeGuNJeT 6021/2 pounds, Max. Vert. brass. Throw 3/4 – ft. garden — hose thread 32 —(F) inlet 40disCperfOrMANCeconnection. NuMber100 psi 800 psiAlso NuMber available Max. in Horiz. aluminum Throw – as ft. GunJet 9 AA2A-AL, 44 weight 10 521 pound. Same design as Capacity GunJet – AA2. GPM 2.3 A 4.9 C 6.7 A 14 CAA2-90AY-SS90Max. Capacity Vert. – Throw GPM – ft. .53 — .90 35 1.5 — 2.5 44AA2-20AY-SSMax. Horiz. Vert. Throw –– ft. ft. 10 — 47 25 12 — 57 3320Capacity Max. Horiz. – GPM Throw – ft. 3.2 liquid 6 pressure 6.4 35 iN 9.0 8psi17 42OrifiCeGuNJeT AA2-120AY-SSdisC120Max. Capacity perfOrMANCe Vert. – Throw GPM – ft. .79 — 1.4 37 2.2 — 4.0 48NuMber100 psi 800 psiAA2-30 NuMber AY-SSHoriz. – ft. 11 49 13 6230Max. Vert. Throw – ft. — 27 — 34A C A CCapacity Max. Horiz. – GPM Throw – ft. 4.7 7 11 38 13 9 31 45GunJet NumberAA2-180AY-SSAA143Capacity – GPM .53 .90 1.5 2.5Max. Vert. Throw – ft. — 37 — 48AA2-20AY-SSCapacity – GPM 1.2 2.3 3.4 6.5180ReplacementMax. Vert. Throw – ft. — 25 — 33AA2-45AY-SS20 PartsHoriz. – ft. 12 49 14 6245Max. Vert. Throw – ft. — 30 — 36Max. Horiz. Throw – ft. 6 35 8 42Max. Horiz. Throw – ft. 8 41 9 48Capacity – GPM .79 1.4 2.2 4.0How to order:AA2-30AY-SSCapacity – GPM 1.6 3.6 4.5 10For complete 30Max. Vert. Throw – ft. — 27 — 34AA2-60AY-SSgun, 60 specify Max. GunJet Vert. Throw spray – ft. gun — number 32 and material. — 40Max. Horiz. Throw – ft. 7 38 9 45Example: AA2-20, Brass Max. or Horiz. Throw – ft. 9 44 10 52ItemCapacity – GPM 1.2 2.3 3.4 6.5AA2-AL20, AluminumAA2-45AY-SSCapacity – GPM 2.3 4.9 6.7 14No.To order orifice 45Max. Vert. Throw – ft. — 30 — 36AA2-90 Part No. AY-SS90disc only, Max. specify Vert. Description Throw orifice – ft. disc number.— 35 Price — 441 Max. Horiz. Throw – ft. 8 41 9 48Example: CP1325-AL AY-SS 20 Max. Horiz. Cap, Aluminum Throw – ft. 10 47 $1.32 12 57Capacity – GPM 1.6 3.6 4.5 102 D_ _AA2-60AY-SSCapacity Orifice – GPM Disc (specify 3.2 size) 6.4 $1.50 9.0 1760Max. Vert. Throw – ft. — 32 — 40AA2-120AY-SS•3 CP4743-NY 120Max. Vert. Gasket, Throw Nylon – ft. — 37 $1.57 — 48Max. Horiz. Throw – ft. 9 44 10 524 CP10566-AL Max. Horiz. Nozzle Throw Housing, – ft. Aluminum 11 49 $18.98 13 62Capacity – GPM 2.3 4.9 6.7 14•5 AA2-90 10565-1-NY-AL AY-SS Capacity90Max. Vert. Seat – GPMThrow Plug, – ft. Plate, — Washer 4.735 & 11 Core — $29.23 13 3144AA2-180AY-SSMax. Vert. Throw – ft. — 37 — 486 CP10571-3-NYB 180 Max. Horiz. Guide Throw Vane, – ft. Nylon 10 47 12$8.6157Max. Horiz. Throw – ft. 12 49 14 627 CP45196-NYB Capacity Gasket, – GPM Nylon (2) 3.2 6.4 9.0 $1.53 178 AA2-120 CP10576-416SS AY-SS120Max. Vert. Stem, Throw Type – ft. 416 — Stainless 37 Steel — $20.66489 How to CP6604-AL order:Max. Horiz. Tubing, Throw Aluminum – ft. 11 49 13$39.0862For complete gun, specify GunJet spray gun number and material.10 CP6618-AL Capacity Nut, – GPMAluminum 4.7 11 13$1.5331Example:AA2-180AY-SS AA2-20, Brass or11 CP6898-GH-AL Max. Vert. Throw – ft. — 37 — 48180 AA2-AL20, Aluminum Inlet Body, Garden Hose Thread $33.1211 Max. Horiz. Throw – ft. 12 49 14 62To order CP6898-3/4-AL orifice disc only, specify Inlet Body, orifice 3/4” disc NPT number. (F) $33.1212 Example: CP5882-NP AY-SS 20 Hand Grip Stud $11.3313 How to CP5883-AL order:Packing Washer, Aluminum $1.58•14 For complete CP5809-LEA gun, specify GunJet Packing, spray Thermo-Leather gun number and (4) material. $1.5815Example:CP5811-ALAA2-20, Brass orPacking Screw, Aluminum $3.51AA2-AL20, Aluminum16 CP5884-INP Hand Grip Collar, Steel-Nickel $8.29To order orifice disc only, specify orifice disc number.17 CP5994-2-NY Hand Grip, Nylon $9.63Example: AY-SS 2018 CP5813-AL Hand Grip Nut, Aluminum $2.6519 CP5808-POL Garden Hose Gasket $4.22PK-AB143-AL-KIT Spare Parts Kit (Includes items with •) $30.30seTTiNG “A”Wide ANGle CONe sprAYGunJet Number AA143Length 221/4, weight 11/4 pounds and only availablein aluminum. Maximum Inlets are available with 3/4 or GH Maximum(Garden Horizontal seTTiNG Hose) female Throw “A” threads.seTTiNG Horizontal “C” ThrowWide ANGle CONe sprAY sTrAiGHT sTreAM sprAYGuNJeTNuMberOrifiCedisCNuMberperfOrMANCeseTTiNG “C”sTrAiGHT sTreAM sprAYliquid pressure iN psi100 psi 800 psiMaximumMaximum A C A CHorizontal Throw Capacity – GPM Horizontal .36 Throw .36 1.0 1.0AA143-AL-*-2 D2 Max. Vert. Throw – ft. — 22 — 26Max. Horiz. Throw – ft. 10 33 11 35Capacity – GPM .82 .82 2.3 2.3GunJet AA143-AL-*-4 Number D4 AA143 Max. Vert. Throw – ft. — 27 — 32Length 221/4, weight 11/4 Max. pounds Horiz. Throw and – only ft. available 10 36 11 40in aluminum. Inlets are Capacity available – GPMwith 3/4 or GH 1.7 1.8 4.9 5.1(Garden AA143-AL-*-6 Hose) female D6 Max. threads. Vert. Throw – ft.Max. Horiz. Throw – ft.—103346—113854Capacity – GPM 2.8 3.3 8.1 9.4liquid pressure iN psiGunJet AA143-AL-*-8 Number OrifiCe D8AA143GuNJeTMax. Vert. Throw – ft. — 35.5 — 42Length 221/4, weightdisC11/4 poundsperfOrMANCeNuMberMax. Horiz. and Throw only – ft. available 100 psi 800 psiNuMber10 54 11 60in aluminum. Inlets are available Capacity – with GPM 3/4 or GH 3.9 A 4.9 C 11.2 A 13.9 C(Garden AA143-AL-*-10 Hose) female D10 threads. Capacity Max. Vert. – Throw GPM – ft. .36 — 37.5 .36 1.0 — 44.5 1.0AA143-AL-*-2 D2 Max. Vert. Horiz. Throw –– ft. ft. 10.5 — 22 55 — 12 26 62*Inlet size 3/4 or GH. Max. Horiz. Throw – ft. 10 liquid pressure 33 iN 11psi35OrifiCeGuNJeTdisC Capacity perfOrMANCe – GPM .82 .82 2.3 2.3NuMber100 psi 800 psiHow AA143-AL-*-4 to order: NuMber D4 Max. Vert. Throw – ft. — 27 — 32A C A CExamples: AA143-AL-3/4-6 Max. Horiz. Throw – ft. 10 36 11 40AA143-AL-GH-6Capacity – GPM .36 .36 1.0 1.0TriggerAA143-AL-*-2AdapterD2AA46Capacity – GPM 1.7 1.8 4.9 5.1Max. Vert. Throw – ft. — 22 — 26To AA143-AL-*-6 order orifice disc D6 only, Max. specify Vert. Throw orifice – ft. disc number. — 33 — 38Replacement Example: D2 Parts Max. Horiz. Throw – ft. 10 33 11 35Max. Horiz. Throw – ft. 10 46 11 54Capacity – GPM .82 .82 2.3 2.3Capacity – GPM 2.8 3.3 8.1 9.4AA143-AL-*-4 D4 Max. Vert. Throw – ft. — 27 — 32AA143-AL-*-8 D8 Max. Vert. Throw – ft. — 35.5 — 42Max. Horiz. Throw – ft. 10 36 11 40Max. Horiz. Throw – ft. 10 54 11 60Capacity – GPM 1.7 1.8 4.9 5.1Capacity – GPM 3.9 4.9 11.2 13.9AA143-AL-*-6 D6 Max. Vert. Throw – ft. — 33 — 38AA143-AL-*-10 D10 Max. Vert. Throw – ft. — 37.5 — 44.5Max. Horiz. Throw – ft. 10 46 11 54Max. Horiz. Throw – ft. 10.5 55 12 62Capacity – GPM 2.8 3.3 8.1 9.4*Inlet size 3/4 or GH.AA143-AL-*-8 D8 Max. Vert. Throw – ft. — 35.5 — 42How to order:Max. Horiz. Throw – ft. 10 54 11 60Examples: AA143-AL-3/4-6Capacity – GPM 3.9 4.9 11.2 13.9AA143-AL-*-10 AA143-AL-GH-6D10 Max. Vert. Throw – ft. — 37.5 — 44.5Max. Horiz. Throw – ft. 10.5 55To order orifice disc only, specify orifice disc number.12 62*Inlet Example: size 3/4 or GH. D2How Itemto order:Examples: AA143-AL-3/4-6No. Part No. Description PriceAA143-AL-GH-6To •1 order orifice CP7502-AL disc only, specify Seat orifice Holder, disc number. Aluminum $3.51Example: •2 D2 CP6710-1-BU Seat, Buna-N $4.113 CP7501-AL Seat Washer, Aluminum SPRAY $1.58GUNS4 CP7458-AL Body, Aluminum $32.15•5 CP7503-LEA Packing, Thermo-Leather (3) $2.196 CP7500-AL Packing Screw, Aluminum $6.237 CP7504-SS Spring, Stainless Steel $3.838 CP7499-SS Stem, Stainless Steel $9.019 CP7622-302SS #6 Burr, Stainless Steel $1.5310 CP7498-SS Stem Nut, Stainless Steel $3.8411 CP7623-IZP Rivet, Steel, Zinc Plated (2) $1.5312 CP6509-INP Trigger, Steel, Nickel Plated $6.1613 CP7477-IZP Trigger Lock, Steel, Zinc Plated $5.2114 CP17720-420SS Roll Pin, Stainless Steel $2.12•15 CP5808-BU Gasket, GH, Buna-N (2) SPRAY $4.22GUNS•16 CP7626-BU Gasket, Outlet Conn, Buna-N (2) $1.53PK-AB46-KIT Spare Parts Kit (Includes items with •) $13.77Grimes, IA - (800) 351-1587 88Olathe, KS - (877) 829-8502SPRAY GUNS109109109

ned toe of spraypplicationsdjustablepplicatorm 1 to 16he trigger.callydosage.eptypesray guns.set volumesetiononeLawnLawnSpraySprayGunsGunsFeatures:Features: Options available: hose shank swivelmodel 25660for inlet connection and extension model 25660wand and adapters for low-volumeand spot spraying.Part# of 200 PSI (14 bar). Price Made of Nylon with Viton® O-rings25660-* $101.81 Maximum operating pressureand stainless steel springs.*Specify Tip Size - 1.5, 3.0, 4.0CaPaCitY (gPm) at various Pressure*REPLACEMENT NOZZLESPart# 25990Price2599025657-NYBSwivelCP25670-1.5-NY25657-NYBSwivelAdapter $14.33AdapterCP25670-3.0-NY $14.33CP25670-4.0-NY $14.332 Psi 4 Psi 6 Psi 8 Psi 10 Psi 15 Psi 20 Psi1.4 1.9 2.3 2.6 2.9 3.4 4.02.0 2.7 3.2 3.6 4.1 4.9 5.62.3 3.1 3.7 4.3 4.7 5.6 6.4CP22664-PPStraight Adapter25660 TeeJetLawn 25660 Spray TeeJet GunReference Tip Chart Lawn for Spray GPM Gun25990 Swivel25990 SwivelAllows operator to concentrate on applicationAllowswithoutoperatorhosetointerference.concentrate on applicationwithout hose interference. 3 ⁄4 (M) NPTconnection with 1/2 hose shank. Maximum3 ⁄4 (M) NPTpressureconnection150 PSIwith(10 bar).1/2 hose shank. Maximumpressure 150 PSI (10 bar).CP22673-PP45º Adapter Charge indicator provides positiveverification of full pressure in chamber. Maximum operating pressureof 75 PSI (5 bar). Minimum pressure of 25 PSI (1.7 bar)to charge unit. Optional spring for low volumeapplications available. Inlet connections available in1/4 NPT or BSPT (F). Wetted parts: Nylon, Teflon®, brassand stainless steel.How to order:Specify part number.Example: (B)23623-31(B) = BSPTd 25657-NYB Adaptering appli- 25657-NYB Adapter24 (38 cm Replaces shower nozzle to allow extensionReplaces shower nozzle to allow extensionon fits on wand or standard TeeJet tip to be attachedpressure directlywandtoorlawnstandardsprayTeeJetgun. 3/4tip(F)toGHTbe attachedinletwithdirectly11⁄16–16toTeeJetlawn spraythreadgun.outlet.3/4 (F)MaximumGHT inlet4-PP pressurewith 11⁄16–16150 PSITeeJet(10 bar).threadSeeoutlet.page 115MaximumforadjustablepressureConeJet®150 PSI (10nozzles.bar). See page 115 foradjustable ConeJet® nozzles.eJet tips ore page 115.Model 50800SPRAY GUNS111toAdjustablenearest 0.1scalesml.to accurately set volumesto nearest 0.1 ml.(B) = BSPT Example: (B)23623-31SPRAY GUNS (B) = BSPT89 Interchangeable nozzle tips are• Interchangeable Interchangeable nozzle nozzle tips are tips color-codedcolor-coded for easy identificationareforofeasy color-codednozzleidentificationtip size.for of easy nozzle identification tip size.• Convenient of nozzle trigger tip size. lock for continuous spraying.• MaximumNozzle tips provide a 45° full cone“showerhead”Nozzle operating tips provide pressurespray pattern.a 45° of full 200 cone PSI• Made “showerhead” of Nylon with Viton spray O-rings pattern.• Made Convenient of Nylon with trigger Viton lock O-rings for and stainlesscontinuousConvenientspraying.trigger lock forsteelcontinuoussprings.spraying.modelNumBer modelNumBerThe 50800 TriggerJet spray gun is a lightweight spray gun designedfor 38720-PPB-X*use with backpack, canister or other low-pressure sprayers. TheNozzle tiPNumBer Nozzle tiPNumBer25660-1.5 CP25670-1.5-NY25660-1.5 CP25670-1.5-NY25660-3.0 CP25670-3.0-NYB25660-3.0 CP25670-3.0-NYB Options available: hose shank swivelforOptionsinlet connectionavailable:andhoseextensionshank swivel• Nozzle wandfortipsinletand provide adaptersconnectiona 45 for o andfull low-volume coneextension“showerhead”wand and adapters for low-volumespray and pattern. spot spraying.and spot spraying.• Options Maximum available: operating hose pressure shank swivel for inletconnection ofMaximum200 PSI and (14operating extension bar). wand pressure and adapters forlow-volume of 200 PSI and (14 spot bar). spraying. Made of Nylon with Viton® O-ringsandMadestainlessof Nylonsteelwithsprings.Viton® O-ringsand stainless steel springs.CaPaCitY (gPm) at various Pressure*CaPaCitY (gPm) at various Pressure*2 Psi 4 Psi 6 Psi 8 Psi 10 Psi 15 Psi 20 Psi2 Psi 4 Psi 6 Psi 8 Psi 10 Psi 15 Psi 20 Psi1.41.41.91.92.32.32.62.62.92.93.43.44.04.02.0 2.7 3.2 3.6 4.1 4.9 5.62.0 2.7 3.2 3.6 4.1 4.9 5.625660-4.0 CP25670-4.0-NY 2.3 3.1 3.7 4.3 4.7 5.6 6.425660-4.0 CP25670-4.0-NY 2.3 3.1 3.7 4.3 4.7 5.6 6.4*Pressure measured at spray nozzle.*Pressure 25990 measured at 25660 spray TeeJet nozzle. 25657-NYB15” or 24”CP22664-PPSwivel Lawn Spray Gun AdapterStraight CP22664-PPExtension Wand - 22665AdapterStraight Adapter15 or 24Extension 15 or Wand 24Extension 22665 WandCP22673-PP22665 45º CP22673-PPAdapter45º Adapter22665 Extension Wand22665 25990 Swivel Extension WandFor low volume and spot spraying applications.Available in both 15 and 24 (38For Allows low operator volume to and concentrate spot spraying on application applications.withoutcmand 61 cm)hose Availablelengths,interference. thebothextension15 3/4” and (M)fits24 NPTon(38 connection cm25657-NYBand with 61 1/2” cm) hose adapter.lengths, shank. Maximumthe Maximum extensionpressure pressure fits on 150 PSI.15025657-NYB Part PSI (10 # bar).adapter. Description Maximum pressure Price150 PSI (10 bar).25990-3/4-NYB Swivel w/ 1/2” Barb $13.13CP22673-PP & CP22664-PPCP22673-PP & CP22664-PPAdaptersAdapters 25657-NYB AdapterUsedUsedReplaces for attachingfor attachingshower standard nozzlestandardto allow TeeJetTeeJetextension tips ortips orwandadjustableadjustable or standard ConeJet nozzles. See page 115for adjustableConeJet TeeJet tipConeJetnozzles. to be attachednozzles.See page directly 115 tofor lawn adjustable spray gun. ConeJet 3/4” (F) GHT nozzles. inlet with 11/16”-16TeeJet thread outlet. Maximum pressure 150 PSIPart # Description Price25657-NYB Wand Adapter $22.45Spray GunsTriggerJet is made of molded polypropylene for excellent chemicalresistance and durability.Features:• Available with 15” polypropylene or 21” aluminumextension wand.• Available with 38720-PPB-X18 or X26 adjustableConeJet tips with a 30 o offset.• Trigger lock permits locking gun in an openposition for continuous flow.• Maximum operating pressure of 100 PSI.Example: Specify part (B)23623-31 number.22665 Extension WandFor low volume and spot spraying applications.Available in both 15” and 24” lengths, the extensionfits on 25657-NYB adapter. Maximum pressure150 PSI.Part # Description Price22665-15-PP 15” Extension Wand $11.5922665-24-PP 24” Extension Wand $19.28CP22673-PP & CP22664-PPAdaptersUsed for attaching standard TeeJet tips oradjustable ConeJet nozzles.Part # Description PriceCP22664-PP Straight Adapter $1.84CP22673-PP 45 o Adapter $1.79SPRAY GUNS 111SPRAY GUNS 111Part# Description Price50800-15-PP-300 Poly Wand w/ 1/4” Barb $16.5550800-15-PP-406 Poly Wand w/ 3/8” Barb $16.5550800-21-AL-300 Aluminum Wand w/ 1/4” Barb $19.8050800-21-AL-406 Aluminum Wand w/ 3/8” Barb $19.80Inlet Barb Replacement FittingCP50786-PP-300 1/4” Hose Barb $2.56•ModelApproximate50800max. hose O.D. - 1/2”.Features:• Polypropylene strainer located inside handle toCP50786-PP-406 3/8” Hose Barb $2.56The 50800 TriggerJet spray gun is a Available with 15 (381 mm) polypropylene Maximum operating pressureprevent tip clogging.lightweight spray gun designed for useor 21 (533 mm) aluminum extension wand. of 100 PSI (7 bar).with backpack,Grimes,canisterIAor-other(800)lowpressuresprayers. The TriggerJet is made351-1587 Available with 38720-PPB-X18 89 or X26 1/4 or Olathe, 3/8 hose KS shank - (877) connection. 829-8502adjustable ConeJet® tips with a 30° offset.of molded polypropylene for excellent Trigger lock permits locking gun in an Approximate max. hose O.D.—1/2 (13 mm).SPRAY GUNS

SPRAY GUNS90Model 22670The 22670 TriggerJet spray gun kitcombines the 22650 TriggerJet spray gunwith an extension wand. Maximum pressurerating is 150 PSI.(B)22670-PP-15-1/422670-PP-15-30022670-PP-15-406(B)22670-PP-24-1/422670-PP-24-30022670-PP-24-406Spray GunsPart#Price22670-PP-15-1/4 (15” Wand) $45.3722670-PP-24-1/4 (24” Wand) $52.30Features:SPRAY GUNS• 22650 TriggerJet spray gun with choice of• Trigger lock permits 1/4 NPT locking or BSPT gun in an openThreaded Connection1/4” or 3/8” hose shank and a 1/4” NPT position for continuous flow (optional)thread inlet connection.• 22665 extension wand 1/4 or 3/8 with choice of 15” or• 38720-PPB-X8 adjustable ConeJet spray24” lengths. Hose Connectiontip with Viton O-ring.• CP22673-PP 45 o and CP22664-PP straight• Accepts all standard TeeJet spray tips andadapters (other capacities available).tip strainers. 22650 TriggerJet spray gun with choiceof 1/4 or 3/8 hose shank and a 1/4 NPTModel 22670Model 22650or BSPT (F) thread inlet connection.The 22650 TriggerJet spray gun is a lightweight spray gunThe 22670 TriggerJet spray gun kit combines Trigger designed lock permits for use locking with backpack, gun canister or otherthe 22650 TriggerJet spray gun with anin an open position for continuousextension wand and the items listed inlow-pressure sprayers. The TriggerJet is made of moldedflow (optional).Features. Maximum pressure rating ispolypropylene for excellent chemical resistance and150 PSI (10 bar).22665 durability. extension wand with choice of15 (381 mm) or 24 (610 mm) lengths.Part# Inlet Connection Price22650-PP-1/4 1/4” (F) NPT $28.7922650-PP-300 1/4” Hose Shank $28.7922650-PP-406 3/8” Hose Shank How to $28.79 order:model number extension lengtH inlet connection tiP number15 (38 cm)15 (38 cm)15 (38 cm)Features:1/4 (F)1/4 Hose Shank3/8 Hose Shank24 (61 cm) 1/4 (F) 38720-PPB-X824 (61 cm)1/4 Hose Shank(Standard nozzleshipped with24 (61 cm)3/8 Hose ShankTriggerJet)(B)=BSPT 38720-PPB-X8 adjustable ConeJet®spray tip with Viton® O-ring.Features:Specify model number.Example: (B)22670-PP-15-1/4Reference page 115 for additionalspray tip information.1/4” NPT ThreadedConnections CP22673-PP 45° • and Choice CP22664-PP of 1/4” or straight 3/8” hose shank andadapters (other capacities 1/4” NPT thread available). inlet connection. Accepts all standard • Replaceable TeeJet spray diaphragm tips made of Vitonand tip strainers. • Accepts all standard TeeJet Spray tipsand tip strainers.• Maximum operating pressure of 150 PSI• Trigger lock permits locking gun in an openposition for continuous flow (optional)TriggerJet Number 22670Replacement PartsFeatures: Choice of 1/4 or 3/8 hose shank Maximum operating pressureand 1/4 NPT or BSPT (F) threadof 150 PSI (10 bar).Iteminlet connection.Item Accepts all standard TeeJet sprayNo. Part No. Description Replaceable diaphragm Pricemade of Viton. No. Part No. tips and tip strainers. Description Price1 CP22656-NY Trigger Lock, Trigger Nylon lock permits $1.93 locking gun in •15 an open CP7717-2-110-VI O-Ring, Viton (2) $.942 CP22671-IZP 22650-PP-* Groove Pin position for continuous $1.22 flow (optional). 16 CP22668-PP Cap, Polypropylene (2) $1.533 CP22672-IZP Groove Pin $1.22 17 CP22663-15-FRP Extension Tube 15” $10.214 CP22655-PP Trigger, Polypropylene model number $3.43 extension17A lengtH CP22663-24-FRP inlet connectionExtension Tube tiP number 24” $16.615 CP22658-PP Spring Retainer $2.32 18 CP22664-PP Straight Adapter $1.84Model •622650CP22660-PHSS Spring, Stainless (B)22650-PP-1/4 Steel $1.26 19 CP38722-1-PP1/4 (F)Core, Polypropylene $4.92The 22650 7 TriggerJet CP22657-NY spray gun is a Stem, Nylon 22650-PP-300 $1.77 NONE 20 CP7717-5-EPR 1/4 Hose Shank O-Ring, EPDM NONE $2.48lightweight •8 spray gun CP22676-NEO designed for use Gasket, with Neoprene $1.50 21 CP22668-PP Cap, Polypropylene $1.5322650-PP-4063/8 Hose Shankbackpack, 9 canister CP22659-PP or other low-pressure Washer, Polypropylene $2.32 22 CP38721-PP-** Tip Body, Polypropylene $5.16sprayers. •10 The TriggerJet CP22661-VI is made of molded Diaphragm, Viton $4.5338720-PPB-** Adjustable ConeJet (B)=BSPT $6.73polypropylene 11 for CP22651-PP excellent chemical Body, Polypropylene How to order: $8.8822665-15-PP Extension Tube Sub-Asb. 15” $11.59resistance •12 and durability. CP7717-2-016-VI O’Ring, Viton Specify model number. $1.76(Items 15, 16 & 17)•13 CP39334-VI Gasket, Viton Example: (B)22650-PP-1/4 $1.0422665-24-PP Extension Tube Sub-Asb. 24” $19.2814A CP22654-PP Handle (1/4” Reference NPT (F) page Conn.) 115 for additional $5.71(Items 15, 16 & 17A)14B CPB22654-PP Handle (1/4” spray BSPT tip information. (F) Conn.) $5.71 PK-AB22670-PP-KIT Repair Kit(Includes all items marked •) $13.2714C CP22653-1/4-PP Handle (1/4” Hose Shank) $5.7114D CP22652-3/8-PP Handle (3/8” Hose Shank) $5.71SPRAY GUNSGrimes, IA - (800) 351-1587 90Olathe, KS - (877) 829-8502

38720-PP Provides adjustablespray from solidstream to a hollowcone pattern.38720-PP38720-PP Made of polypropylene materialfor Providesexcellentadjustablechemical resistance.• Provides adjustable spray from solid Provides Fits spray any adjustable from 11/16–16 solid TeeJet®stream spray male stream to from a thread hollow solid to a bodies. hollow cone pattern• Made stream cone of polypropylene pattern. 30° offset to a hollow from horizontalmaterial cone for excellentincorporated Made pattern. of polypropylene into main tip material body.chemicalforresistance. Made of excellent polypropylene chemical material resistance.• Fitsforandy 11/16”-16 TeeJet male thread bodies.• 30 o excellentoffsetFitsfromany 11/16–16 chemicalhorizontalTeeJet® resistance.incorporated into main male thread bodies.tip Fits body. any 11/16–16 TeeJet®male 30° thread offset bodies. from horizontalPart# Description Price 30° offset incorporated from horizontal into main tip body.38720-PPB-X** incorporated into main All Sizes tip body. $6.735500MaximumMaximumThrow – feetThrow – feetTiP seTTinG “B”Maximum Throw – feetsTrAiGHT TiP seTTinG sTreAM“B”sPrAY PATTernsTrAiGHT sTreAM sPrAY PATTernAdjustable Spray TipsAdjustable Spray TipsKnurled body of5500 tip rotates throughKnurled a half body turn of to tip provide rotatesthrough spray a half selection turn to from provide wide angle, finelyspray atomized5500 selection cone from wide spray angle, to a straight streamfinely spray.5500 atomized Tip settings cone spray “A” to and a straight “B” represent stream spray.Knurled body ofTip settingstwo extremeKnurled tip rotates “A” andpointsbody of through “B” representof rotationtwo extremein tippoints ofadjustment. Other sizes available.rotationtip rotates a half in tip turn throughadjustment. to provide Other sizes available.a Part# half spray turn selection to provide Description from wide angle, finely Pricespray atomized selection cone from spray wide to angle, a straight finely stream5500-X** All Sizes (Brass) $20.03atomized spray. cone Tip settings spray to “A” a straight and “B” represent streamspray. two Tip extreme settings points “A” and of “B” rotation represent in tiptwo adjustment. extreme points Other of sizes rotation available.5500-PPin tipadjustment. Other sizes available.The 5500 adjustable ConeJettip is also available in apolypropylene version. The Polypropylenetip has 5500-PP the same performance characteristics as thebrass tip and provides excellent chemical resistance.The 5500 adjustable ConeJet tip isThisalsotip’savailablelight weightinmakesa polypropyleneit well-suitedversion.for use onhandheld The polypropylene and backpack type tip has sprayers. the sameO-Ring: performance EPDM is standard, characteristics Viton optional as the brasstip and provides excellent chemicalPart# 5500-PP Description Priceresistance. This tip’s light weight makes5500-PPB-X** All Sizes $9.11it The well-suited 5500 adjustable for use on ConeJet handheld tip is andThe backpack also 5500 available adjustable type in sprayers. ConeJet a polypropylene tip is version.also The polypropylene tip has the sameO-ring: available EPDM in is a standard, polypropylene version.The Viton® performance polypropylene is optional. characteristics tip has the same as the brassperformance tip and provides characteristics excellent as the chemical brasstip and resistance. provides This excellent TiP tip’s seTTinG light chemical weight “A” makesresistance. it well-suited This COne tip’s for light use sPrAY on weight handheld PATTern makes andit well-suited backpack for type use sprayers. on handheld andbackpack O-ring: type EPDM sprayers. is standard,O-ring:Viton®EPDMis optional.is standard,Viton® is optional.MaximumTiP Throw seTTinG – feet “A”TiP COne seTTinG sPrAY “A” PATTernCOne TiP sPrAY seTTinG PATTern “B”sTrAiGHT sTreAM sPrAY PATTernList Priceliquid Pressure in PsiSPRAY GUNS 20 Psi 30 Psi 40 Psi 60 Psi 100 Psi 91AdjusTABleCOnejeTTiP nuMBer38720-PPB-X8AdjusTABleCOnejeTAdjusTABle38720-PPB-X12TiP nuMBerCOnejeTTiP nuMBer38720-PPB-X1838720-PPB-X838720-PPB-X838720-PPB-X2638720-PPB-X1238720-PPB-X1238720-PPB-X18AdjusTABle38720-PPB-X18 COnejeTTiP nuMBer38720-PPB-X2638720-PPB-X265500-X1AdjusTABleCOnejeTAdjusTABle TiP nuMBerCOnejeTTiP nuMBer5500-X2PerfOrMAnCeseTTinG seTTinG seTTinG seTTinG seTTinGA B A B A B A B A BCapacity – GPM 0.097 0.33 0.12 0.40 0.13 0.47 0.16 0.57 0.21 0.74Spray Angle 66º — 71º — liquid 74º Pressure — in 77º Psi — 80º —Max. Throw – Ft. 3 34 320 Psi 30 liquid 37Psi Pressure 340 Psi in 38Psi3 38 4 3860 Psi 100 PsiCapacity PerfOrMAnCe – GPM 0.15 0.49 0.18 0.60 0.20 0.69 0.24 0.84 0.31 1.1Spray Angle 2071º Psi seTTinG — 3075º Psi seTTinG — 40 77º Psi seTTinG — 60 78º Psi seTTinG — 100 80º Psi seTTinG —PerfOrMAnCeMax. Throw – Ft. seTTinG 3.5A 36B seTTinG 4A 39B seTTinG 4A 40B seTTinG 4A 41B seTTinG 4A 41BCapacity – GPM 0.20 0.68 0.24 0.81 0.28 0.92 0.34 1.1 0.42 1.4Capacity – GPM A 0.097B 0.33A 0.12 B 0.40A 0.13 B 0.47A 0.16B 0.57A 0.21B0.74Spray Angle 61º — 68º — 80º — 80º — 80º —Capacity Spray Angle 66º 71º 74º 77º 80º Max. Throw – GPM– Ft. 0.0974 0.33380.12 4 0.4041 0.13 4 0.47 42 0.16 4 0.57420.21 6 0.74 42Spray Max. Throw – Ft. 3 34 3 37 3 38 3 38 4 38Capacity Angle – GPM 66º 0.31— 0.8971º 0.38— 1.1 74º 0.43— 1.2 77º 0.53— 1.5 80º 0.68—1.9Max. Capacity Throw – – Ft. GPM 3 0.1534 0.493 0.1837 0.603 0.2038 0.693 0.2438 0.844 0.31381.1Spray Angle 77º — 82º — 84º — 86º — 86º —Capacity Spray – Angle GPM 0.15 71º 0.49 0.18 75º 0.60 0.20 77º 0.69 0.24 78º 0.84 0.31 80º 1.1Max. Throw – Ft. 4 34 4.5 37 5 38 5.5 39 6 40Spray Max. Angle Throw – Ft. 71º 3.5— 3675º 4 — 3977º 4 — 4078º 4 — 4180º 4 — 41Max. Capacity Throw – – Ft. GPM3.5 0.2036 0.684 0.2439 0.814 0.2840 0.924 0.3441 1.1 4 0.42411.4liquid Pressure in PsiCapacity Spray – Angle GPM 0.20 61º 0.68 — 0.24 68º 0.81 — 0.28 80º 0.92 — 0.34 80º 1.1 — 0.42 80º 1.4 —Spray Max. Angle Throw – Ft. 61º 4 — 3868º 4 — 4180º 4 — 4280º 4 — 4280º 6 — 42PerfOrMAnCe20 Psi 30 Psi 40 Psi 60 Psi 100 Psi 150 PsiMax. Capacity Throw – – Ft. GPM 4 0.3138 0.894 0.3841 1.1 4 0.4342 1.24 0.5342 1.56 0.68421.9seTTinG seTTinG seTTinG seTTinG seTTinG seTTinGCapacity Spray – Angle GPM 0.31 77º 0.89 — 0.38 82º 1.1 — 0.43 84º 1.2 — 0.53 86º 1.5 — 0.68 86º 1.9 —Spray Max. Angle Throw – Ft. A77º 4 B— 34 A82º 4.5B — 37 A B84º 5 A— 38 B86º 5.5 A— 39B 86º 6A — 40 BMax. Capacity Throw – GPM Ft. 4 — 34 .049 .015 4.5 .061 37 .0175 .07 38.02 5.5 .086 .025 39 .11 6 .028 40 .14liquid Pressure in PsiSpray Angle — — 38° — 54° — 71° — 80° — 83° —liquid Pressure in PsiMax. PerfOrMAnCeThrow – Ft. — 20 Psi 19 1 30 Psi 22 1.540 Psi 24 1.560 Psi 26 1.5100 Psi 26 1.5150 Psi 26PerfOrMAnCeCapacity – GPM 20 .025 Psi seTTinG .091 30 .03 Psi seTTinG .11 40 .033 Psi seTTinG .13 60 .04 Psi seTTinG .16 100 .05 Psi seTTinG .20 150 .058 Psi seTTinG .25Spray Angle seTTinG 40° A — BseTTinG 60° A — BseTTinG 68° A — BseTTinG 75° A — BseTTinG 80° A — BseTTinG83° A — BMax. Capacity Throw – GPM – Ft. A 1.5 — B 23 .049 A 1.5 .015 B 26 .061 A .017 2 B 27 .07 A 2.02 B 28 .086 A .025 2 B 28 .11 A .028 2 B 28 .145500-X3 5500-X1 Capacity Capacity Spray – GPM Angle – GPM — .037 —.049 .13 —.015 .045 38° .061 .17 —.017 .05 54° .07 .19 —.02 .058 71° .086 .23 —.025 .073 80° .11 .30 —.028 .088 83° .14 .37 —5500-X1Spray Spray Max. Angle Angle Throw – Ft. — 57° — — 19 38° 68° 1— — 22 54° 72° 1.5 — — 24 71° 76° 1.5 — — 26 80° 80° 1.5 — — 26 83° 82° 1.5 — — 265500-PPB-X3Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. — .025 2 19 27 .091 1 2.03 22 30 .11 1.5 .033 2 24 31 .13 1.5 2.04 26 31 .16 1.5 3.05 26 31 .20 1.5 .058 3 26 31 .255500-X25500-X2 5500-X4Capacity Capacity Spray – GPM Angle – GPM .025 .05 40° .091 .18 —.03 .058 60° .11 .22 —.033 .067 68° .13 .25 —.04 .08 75° .16 .31 —.05 .10 80° .20 .40 —.058 .12 83° .25 .49 —Spray Spray Max. Angle Angle Throw – Ft. 40° 61° 1.5 — — 23 60° 70° 1.5 — — 26 68° 73° 2— — 27 75° 77° 2— — 28 80° 80° 2— — 28 83° 81° 2—— 285500-X3Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 1.5 2.5 .037 23 30 .13 1.5 2.5 .045 26 33 .172 3.05 27 34 .192 .058 3 28 34 .232 .073 3 28 34 .302 .088 3 28 34 .375500-X3 5500-X5 Capacity Capacity Spray – GPM Angle – GPM .037.061 57° .13 .21 —.045 .076 68° .17 .26 —.05 .082 72° .19 .30 —.058 .10 76° .23 .37 —.073 .13 80° .30 .48 —.088 .15 82° .37 .58 —5500-PPB-X3Spray Spray Max. Angle Angle Throw – Ft. 57° 61° 2— — 27 68° 70° 2— — 30 72° 74° 2— — 31 76° 77° 2— — 31 80° 80° 3— — 31 82° 81° 3—— 315500-PPB-X35500-PPB-X5Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 2 2.5 .05 27 31 .182 2.5 .058 30 34 .222 .067 3 31 35 .252 3.08 31 35 .313 3.10 31 35 .403 3.12 31 35 .495500-X6 5500-X4 Capacity Capacity Spray – GPM Angle – GPM .05.073 61° .18 .26 —.058 .087 70° .22 .32 —.067 .10 73° .25 .37 —.08 .12 77° .31 .45 —.10 .15 80° .40 .58 —.12 .19 81° .49 .71 —5500-X4Spray Spray Max. Angle Angle Throw – Ft. 61° 65° 2.5 — — 30 70° 71° 2.5 — — 33 73° 74° 3— — 34 77° 77° 3— — 34 80° 80° 3— — 34 81° 80° 3—— 345500-PPB-X65500-X5Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 2.5 2.5 .061 30 32 .21 2.5 .076 3 33 35 .263 .082 3 34 36 .303 3.5 .10 34 36 .373 3.5 .13 34 36 .483 3.4 .15 34 36 .585500-X5Spray Angle 61° — 70° — 74° — 77° — 80° — 81° —5500-PPB-X55500-X8 Capacity Capacity – GPM – GPM .061.097 .21 .33.076 .12.26 .40.082 .13.30 .47.10 .16.37 .57.13 .21.48 .74.15 .25.58.90Spray Spray Max. Angle Angle Throw – Ft. 61° 66° 2.5 — — 31 70° 71° 2.5 — — 34 74° 74° 3— — 35 77° 77° 3— — 35 80° 80° 3— — 35 81° 80° 3—— 355500-PPB-X55500-PPB-X8Max. Max.5500-X6Capacity Throw Throw – Ft. – GPM – Ft. 2.5 .073 3 31 34 .26 2.5 .087 3 34 37 .323 3.10 35 38 .373 3.12 35 38 .453 4.15 35 38 .583 4.19 35 38 .715500-X6Capacity Capacity Spray – GPM Angle – GPM .073.12 65° .26 .42 —.087 .15 71° .32 .52 —.10 .17 74° .37 .60 —.12 .21 77° .45 .73 —.15 .26 80° .58 .94 —.19 .31 80° .71 1.2 —5500-PPB-X65500-X10 Spray Spray Max. Angle Angle Throw – Ft. 65° 68° 2.5 — — 32 71° 72° 3— — 35 74° 75° 3— — 36 77° 78° 3.5 — — 36 80° 80° 3.5 — — 36 80° 80° 3.4 — — 365500-PPB-X65500-X8Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 2.5 .097 3 32 35 .333 3.5 .12 35 38 .403 3.5 .13 36 39 .47 3.5 4.16 36 40 .57 3.5 4.21 36 40 .74 3.4 4.25 36 40 .905500-X8 5500-X12 Capacity Capacity Spray – GPM Angle – GPM .097 .15 66° .33 .49 —.12 .18 71° .40 .60 —.13 .20 74° .47 .69 —.16 .24 77° .57 .84 —.21 .31 80° .74 1.1 —.25 .38 80° .90 1.3 —5500-PPB-X8Spray Spray Max. Angle Angle Throw – Ft. 66° 69° 3— — 34 71° 73° 3— — 37 74° 76° 3— — 38 77° 78° 3— — 38 80° 80° 4— — 38 80° 80° 4—— 385500-PPB-X85500-PPB-X12Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 3 3.5 .12 34 36 .423 4.15 37 39 .523 4.17 38 40 .603 4.21 38 41 .734 4.26 38 41 .944 4.31 38 41 1.25500-X105500-X10 5500-X14Capacity Capacity Spray – GPM Angle – GPM .12 .17 68° .42 .55 —.15 .20 72° .52 .67 —.17 .23 75° .60 .78 —.21 .29 78° .73 .95 —.26 .37 80° .94 1.2 —.31 .45 80° 1.2 1.5 —Spray Spray Max. Angle Angle Throw – Ft. 68° 70° 3— — 35 72° 74° 3.5 — — 38 75° 76° 3.5 — — 39 78° 78° 4— — 40 80° 80° 4— — 40 80° 80° 4—— 405500-X12Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 3 3.5 .15 35 37 .49 3.5 4.18 38 40 .60 3.5 4.20 39 41 .694 4.24 40 41 .844 4.5 .31 40 41 1.14 4.5 .38 40 41 1.35500-X12 5500-X18 Capacity Capacity Spray – GPM Angle – GPM .15 .21 69° .49 .69 —.18 .26 73° .60 .84 —.20 .30 76° .69 .97 —.24 .37 78° .84 1.2 —.31 .47 80° 1.1 1.5 —.38 .58 80° 1.3 1.9 —5500-PPB-X12Spray Spray Max. Angle Angle Throw – Ft. 69° 71° 3.5 — — 36 73° 75° 4— — 39 76° 77° 4— — 40 78° 78° 4— — 41 80° 80° 4— — 41 80° 79° 4—— 415500-PPB-X125500-PPB-X18Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 3.5 4.17 36 38 .554 4.20 39 41 .674 4.23 40 42 .784 4.29 41 42 .954 5.37 41 42 1.24 5.45 41 42 1.55500-X22 5500-X14 Capacity Capacity Spray – GPM Angle – GPM .17 .26 70° .55 .83 —.20 .32 74° .67 1.0 —.23 .37 76° .78 1.2 —.29 .45 78° .95 1.4 —.37 .58 80° 1.2 1.9 —.45 .70 80° 1.5 2.3 —5500-X14 Spray Spray Max. Angle Angle Throw – Ft. 70° 71° 3.5 — — 37 74° 75° 4— — 40 76° 78° 4— — 41 78° 79° 4— — 41 80° 80° 4.5 — — 41 80° 78° 4.5 — — 415500-PPB-X225500-X18Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 3.5 4.21 37 39 .694 4.5 .26 40 41 .844 5.30 41 42 .974 5.37 41 42 1.2 4.5 5.47 41 42 1.5 4.5 5.58 41 42 1.95500-X18 Capacity Capacity Spray – GPM Angle – GPM .21 .31 71° .69 .98 —.26 .37 75° .84 1.2 —.30 .43 77° .97 1.4 —.37 .53 78° 1.2 1.7 —.47 .68 80° 1.5 2.2 —.58 .83 79° 1.9 2.7 —5500-PPB-X185500-X26 Spray Spray Max. Angle Angle Throw – Ft. 71° 72° 4— — 38 75° 76° 4— — 41 77° 78° 4— — 42 78° 79° 4— — 42 80° 80° 5— — 42 79° 78° 5—— 425500-PPB-X185500-X22Max. Max. Capacity Throw Throw – Ft. – GPM – Ft. 4 4.5 .26 38 40 .834 5.32 41 42 1.04 5.37 42 43 1.24 5.5 .45 42 43 1.45 5.58 42 43 1.95 5.5 .70 42 43 2.3Above data is based on spraying5500-X22Capacity Spray water – GPM Angle from a .26 height 71° .83 of about —.32 75° 1.0 —.37 78° 1.2 —.45 79° 1.4 —.58 80° 1.9 —.70 78° 2.3 —21/2 feet 5500-PPB-X22with tip tilted about as shown at left for each setting.Spray Max. Angle Throw – Ft. 71° 4— 39 75° 4.5 — 41 78° 5— 42 79° 5— 42 80° 5— 42 78° 5—425500-PPB-X22Max. Capacity Throw – Ft. – GPM 4 .31 39 .98 4.5 .37 41 1.25 .43 42 1.45 .53 42 1.75 .68 42 2.25 .83 42 2.7SPRAY GUNS5500-X26 Capacity Spray – GPM Angle .31 72° .98 —.37 76° 1.2 —.43 78° 1.4 —.53 79° 1.7 —.68 80° 2.2 —.83 78° 2.7 —Maximum Please Throw Apply – feet Discount5500-X26 Spray Max. Angle Throw – Ft. 72° 4.5 — 40 76° 5— 42 78° 5— 43 79° 5.5 — 43 80° 5.5 — 43 78° 5.5 — 43Maximum Throw – feetAbove data is based on Max. spraying Throw water – Ft. from 4.5 a height 40 of about 5 42 5 43 5.5 43 5.5 43 5.5 43Above21/2datafeetiswithbasedtipontiltedsprayingaboutwateras shownfromataleftheightfor eachof aboutsetting.Grimes, IA - (800) 351-158721/2 feet with tip tilted about as shown at left for each setting.91Olathe, KS - (877) 829-8502SPRAY GUNS 115SPRAY GUNS 115SPRAY GUNS115

SPRAY GUNS92PW4000AThe model PW4000A GunJet is a durable high-pressure spray gunthat offers comfort and control. Trigger locks into an off positionto prevent accidental discharge. The PW4000A operates at up to4,000 PSI (275 bar) and provides flow rates up to 10 GPM (38 l/min).Liquid temperatures up to 300°F (150°C). Available with 1/4 or3/8 NPT or BSPT inlet and outlet connections.PW4000AS AA30L-22425Spray GunsPart# Extension Length PriceAA30L-1/4 Without Extension $65.20AA30L-22425-8 8” $102.78AA30L-22425-18 18” $109.52AA30L-22425-24 24” $116.08AA30L-22425-36 36” $133.36SPRAY GUNSAA23L-7676The model The PW4000AS AA30L-22425 has GunJet the same spray features gun (shown as PW4000A above) is also available without How to order:except available extension with as GunJet a 3/8 NPT spray or gun BSPT AA30L. swivel Flow inlet. rates up to 5 GPM. Maximum Specify model The number. AA23L-7676 GunJet spray gun (shown above) is also available withoutSee page 116 operating for extensions. pressure of 250 PSI. Outlet connection is 11/16”-16 TeeJet thread. Example: extension PW(B)4000A as GunJet spray gun AA23L. Flow rates up to 5 GPM. MaximumBody and trigger molded of tough Nylon. When used with extension, the (B) valve = BSPT operating pressure of 250 PSI. Inlet 1/4” NPS (M) thread. Strong aluminumstem extends through the entire extension length for drip-free shutoff immediatelyalloy body. When used with extension, the valve stem extends through thebehind the spray tip. Accommodates all interchangeable TeeJet spray entire extension length for drip-free shutoff immediately behind the spray tip.tips.Accommodates all interchangeable TeeJet spray tips.Part# Extension Length PriceAA23L Without Extension $71.02AA23L-7676-8 8” $105.49AA23L-7676-18 18” $112.47AA23L-7676-24 24” $119.21AA23L-7676-36 36” $128.82AA30L-22425-48AA30A48” $150.17 AA23L-7676-48AA30L-PP48” $153.42Maximum pressure rating of 1,500 PSI (105 bar) with 5 GPM (19 l/min), This new version of the standard AA30L GunJet spray gun is200°F (93°C) and 1/4 (F) NPT or BSPT inlet thread. Materials including constructed of polypropylene for excellent corrosion resistance.Nylon handles and trigger guards, forged brass valve bodies, AA30L-PP Buna-N The maximum pressure rating is 150 PSI (10 bar) with flow rates upor Viton® stem seals, Teflon® valve seats and stainless steel This new working version of the to standard 5 GPM (19 AA30L l/min). GunJet Liquid spray inlet gun connection is available in 11990-10 1/4 (F) NPT Swivelparts mean long, productive equipment life. constructed of polypropylene or BSPT. for Wetted excellent parts corrosion are polypropylene, resistance. stainless steelSwiveland Viton.Connection, 1/4”How to order:The maximum pressure How rating to is order: 150 PSI with flow rates up toNPT (F) inlet, 1/4” NPS (F)Specify model number.5 GPM. Liquid inlet connection Specify model available number. in 1/4” (F) NPT.outlet. Fits AA23L guns.Example: AA(B)30A-1/4Wetted parts are polypropylene, Example: stainless AA(B)30L-PP steel and Viton.(B) = BSPT(B) = BSPTPart#Price11990-10 $17.65Part# Description PriceAA30L-PP GunJet Spray Gun $54.08AA23L-7676AA30L-22425The AA30L-22425 GunJet spray gun (shown above) is also availableThe AA23L-7676 GunJet spray gun (shown above) is also availablewithout extension as GunJet spray gun AA23L. Flow rates up to without extension as GunJet spray gun AA30L. Flow rates up to 55 GPM (19 l/min). Maximum operating pressure of 250 PSI (17 bar). GPM (19 l/min). Maximum GunJet operating AA23L-7676 pressure of 250 PSI (17 bar). OutletItemInlet 1/4 NPS (M) thread. Strong aluminum alloy body. When used connection is 11/16–16 Replacement TeeJet® thread. Parts Body and trigger molded ofwith extension,No.the valvePartstemNo.extends throughDescriptionthe entire extensionPricetough Nylon. When used with extension, the valve stem extendslength for 1 drip-free CP16054-1-AL shutoff immediately Body, behind Aluminum the spray tip. $35.78 through the entire extension length for drip-free shutoff immediatelyAccommodates •2 all interchangeable CP16053-2-302SS TeeJet® Main spray Spring, tips. Stainless Steel $5.07 behind the spray tip. Accommodates all interchangeable TeeJet3 CP7480-IZP Spring Screw $5.07 Itemspray tips.4 CP7491-SS Spring Stud, Stainless Steel $4.50 No. Part No. Description Price5 CP8591-IZP Trigger Guide $1.88 14 CP4743-TEF Gasket, Teflon $5.63GunJet numberextension LenGtHGunJet numberextension LenGtH6 CP7486-SS Lock Nut, Stainless Steel $5.61 15A 7715-8 Extension, Brass (8” Length) $12.28AA23L 7 CP16071-NP Packing Without Screw Extension $3.37 AA(B)30L-1/4 15B 7715-18 Extension, Without Brass Extension (18” Length) $15.46•8 AA23L-7676-8 CP14255-1-BU Cup 8 Packing, (203 mm) Buna-N $5.86 AA(B)30L-22425-815C 7715-24 Extension, 8 (203 mm) Brass (24” Length) $16.71AA23L-7676-189 CP7892-IZP Key,18Steel,(457Zincmm)Plated $3.09AA(B)30L-22425-1815D 7715-36 Extension, 18 (457 Brass mm) (36” Length) $21.1410 CP16052-NP Inlet Body $23.40 15E 7715-48 Extension, Brass (48” Length) $25.62AA23L-7676-2424 (610 mm)AA(B)30L-22425-2424 (610 mm)11A CP7677-8-SS Stem, S.S., (8” Extension) $22.28 •16 CP7490-TEFSS Valve Seat $8.86AA23L-7676-3611B CP7677-18-SS Stem, 36 S.S., (914 mm) (18” Extension) $27.54 AA(B)30L-22425-3636 (914 mm)17 TP** Specify TipAA23L-7676-4811C CP7677-24-SS Stem, 48 S.S., (1,219(24” mm) Extension) $36.11 AA(B)30L-22425-4818 CP1325-NP Tip Retainer 48 (1,219 mm)$2.3311D CP7677-36-SS Stem, S.S., (36” Extension) $48.64 19 CP9539-INP Trigger Guard $7.58How to order: 11E CP7677-48-SS Stem, S.S., (48” Extension) $63.99 How to order: 20 CP14252-INP Trigger $7.82Specify model 12 number. CP7679-1 Stem Guide Nut, Brass $3.08 Specify model 21 number. CP8038-SS Rivet, Stainless Steel (2) $1.58Example: •13 AA23L CP7678 Stem End, Brass $7.78Example: AB23L-7676-KIT AA(B)30L-1/4 Repair Kit (Includes all items marked •) $17.88(B) = BSPTGrimes, IA - (800) 351-1587 92Olathe, KS - (877) 829-8502SPRAY GUNSList PricePlease Apply Discount

AA43-AL-6 GunJetReplacement PartsSPRAY GUNS 95ItemNo. Part No. Description Price1 CP1325-AL Cap, Aluminum $1.322 D-** Orifice Disc, Spicify Size $1.50•3 CP4743-NY Gasket, Nylon $1.574 CP10566-AL Nozzle Housing, Aluminum $18.28•5 10565-1-NY-AL Seat Plug, Plate, Washer & Core $29.236 CP10571-3-NYB Guide Vane, Nylon $8.617 CP45196-NYB Gasket, Nylon (2) $1.588 CP19238-416SS Stem, Stainless Steel $24.069 CP6604-AL Tubing, Aluminum $39.0810 CP6492-AL Inlet Body, Aluminum $30.50•11 CP6601-302SS Packing Washer, Stainless Steel $4.13•12 CP6602-LEA Packing, Leather (3), Standard $3.5912 CP6602-TEF Packing, Teflon (3), Optional $9.0913 CP19237-AL Packing Screw, Aluminum $5.2114 CP6599-NP Locknut, Nickel Plated $3.5115 CP9641-INP Stem Nut $5.7116 CP6595-SS Trigger Stop Spring $3.0817 CP7991-SS Washer, Stainless Steel $1.1018 CP6597-INP Trigger Guide $16.2619 CP6591-SS Spring Stud, Stainless Steel $3.6820 CP6589-IZP Stop Adjustment Nut $4.8121 CP6594-SS Spring for Stop Adjustment Nut $1.6422 CP6588-IZP Spring Screw $5.0823 CP6592-302SS Spring Guide Washer $2.5624 CP6593-1-SS Main Spring (for AA43L) $5.2124 CP6591-2-SS Main Spring (for AA43H) $5.2125 CP14477-1-AL GunJet Body, Aluminum $57.1026 CP7623-IZP Rivet (2) $1.5327 CP6509-INP Trigger $6.1628 CP6510-INP Trigger Stop $5.4129 CP11757-SS Screw, Stainless Steel $4.2230 CP13798-INP Trigger Guard $10.98PK-AB43-AL-KIT Spare Parts Kit (Includes items marked •) $40.18SPRAY GUNSAA18 GunJetAluminum GunJet with 1/4” NPT (F)AA43 Inlet GunJet connection.Designed and built for heavy duty service.Stem extends MODEL through extension INLET to valveseat located NUMBER directly behind CONNECTION orifice disc MATERIAL LENGTH PRICEfor drip-free shutoff and instant operatingAA18-AL6 1/4” (F) NPT Aluminumresponse. Convenient trigger-lock forcontinuous spraying.20” $83.25 Number AA43L for operating pressuresup to 200 PSI. Number AA43H for operating pressuresup to 800 PSI. Trigger handle control: ALL MODELS have1/2 NPT or BSPT (F) inlet connections.Hardened Stainless SteelType D Orifice DiscsSpray Guns Exposed packing nut for easyadjustment of packing. Available in aluminum only.Hardened Stainless SteelType DX-HSS Spray TipsItemNo. Part No. Description Price1 CP1325-AL Cap, Aluminum $1.322 D** Type 43L & 43H Orifice Disc, Specify Size $1.50•3 CP5871-BU GunJet Spray Tip Guns Gasket, Buna-N $3.714 CP5869-AL Spray Housing, Aluminum $7.17OPERATINGMOdELLENGTH•5 10516-AL PRESSURE MATERIALNUMBER Core, Rivet & Core Body (INCHES) Asb. $17.21RANGE (PSI)6 CP5872-AL Guide Sleeve, Aluminum $3.097 CP45197-NYB AA(B)43L-AL Up to Gasket, 200 Aluminum Nylon (2) $1.5822•8 CP5798-NY AA(B)43H-AL 200–800 Seat Plate, Aluminum Nylon $6.12•9 CP7709-302SS #10 Washer, Stainless (B) Steel = BSPT $6.8910 CP5878-AL Tubing, Aluminum $22.0911 CP5879-AL Stem, Aluminum $9.2212 CP6618-AL Nut, #1/4-28 Aluminum $1.5313 CP6896-AL Inlet Body, Aluminum $30.0914 CP5882-NP Hand Grip Stud, Nickel Plated $11.3315 CP5883-AL Packing Washer, Aluminum $1.5816 CP5809-LEA Packing, Thermo-Leather (4) $1.5817 CP5811-AL Type 43A Packing Screw, Aluminum $3.5118 CP5884-INP GunJet Spray Hand Guns Grip Collar $8.2919 CP5994-NY Plastic Hand Grip, Nylon $9.63OPERATINGMOdELLENGTH20 CP5813-AL PRESSURE Hand Grip MATERIAL Nut, Aluminum $2.65NUMBER(INCHES)RANGE (PSI)21 5838-AL Hand Grip Sub-Asb $19.68AA(B)43LA-AL Up to Includes 200 Aluminum Items 14, 18, 19 & 2013PK-AB18-AL-KIT AA(B)43HA-AL Spare Parts 200–800 Kit (Includes Aluminum Items Marked •) $23.40(B) = BSPTChoose one of five interchangeable Grimes, IA - (800) orifice 351-1587 For spraying trees and other applications 95Olathe, KS - (877) 829-8502disc capacities. Other sizes may be available where maximum spray throw is required.upon request. Discs are corrosion- andWrite for Data Sheet 6990.

SPRAY GUNS96SPRAY GUNSModels 3381-0010 and 3381-03381-0010 3381-0011 3381-0013FEATURES FEATURES FEATURES• Adjustable pattern spray gun • Adjustable pattern spray gun • Adjustable pattern spray gunSPECIFICATIONS:• 17” barrel • 21” barrel • 7” barrelMaximum Pressure: 1200 psi• 3mm nozzle • 4mm nozzle • 3mm nozzle• 1/2” MNPT inlet • 1/2” MNPT inlet Maximum Capacity: • 1/2” MNPT Model 3381-0010 inlet - 25 gpmRef. QtyRef. QtyNo. Part# Description Price1 9920-232 Washer $2.662 9920-230B Inlet Port $14.663 9920-193 Hand Grip $13.885 9920-231 Plug $17.56•6 9920-3100 O-Ring KIT7 9920-233 Spring $6.51•8 9920-71903.1 Poppet $6.85•9 9920-129 Seat KIT10 9920-7.1615.3 Body Assy for -0010 $192.6110 9920-13.1615.8 Body Assy for -0011 $249.26•11 9920-2050 O-Ring KIT12 9920-239 Plunger $10.48•13 9920-109 O-Ring KIT14 9920-241 Guide $11.6115 9920-246 Trigger $21.8116 9920-245C Locking Clip $10.4217 9920-194 Pin $6.5718 9920-1751 Washer $1.0819 9920-5587-68 Nut $3.1722 9920-192 Front Grip $14.45Hudson Spray GunHudson High PressurePart# Max PSI Max GPM Price3381-0010 1200 25 $217.333381-0011 1200 30 $299.733381-0013 700 19 $188.49Spray Gun w/ #10 Tip StandardPart# PriceJD-9 $324.56Gun Repair Kit with Teflon SeatsPart # Price38511-101TV $43.053381-0010/0011 Tree GunReplacement PartsNo. Part# Description Price23 9920-247 Bracket $40.5025 9920-5931 Bolt (2 Req’d) $1.1326 9920-1751 Washer (2 Req’d) $1.08•27 9920-119 O-Ring (2 Req’d) KIT28 9920-237 Regulator $26.3431 9920-183 Shroud for -0010 $7.3631 9920-408 Shroud for -0011 $11.6132 9920-158 Nozzle Retainer-0010 $21.5332 9920-407 Nozzle Retainer-0011 $21.53•33 9920-115 O-Ring KIT•34 9920-124 O-Ring KIT35 3385- Nozzles 3385-2300, $25.49-3000, -3500, -4000,-4500, -5000, -5500,-6000, -700036 9910-110130 Hose Barb, wing nut, $16.71gasket9920-KIT10/11 Repair Kit (Includes items $34.84marked with •)Poly Flooding NozzlesFor Lawn ApplicationsPart# Price38633 $45.4838644 $45.48Root FeederAttachmentPart# Price38919 $535.05Model 3381-0011 - 30 gpmBarrel Length: Model 3381-0010 - 17"Model 3381-0011 - 21"Port-NPT: 1/2" Inlet (M)(Note: Gun comes equipped with a 1/2" hose barb inlet.Simply remove hose barb for 1/2" male inlet.)List PricePlease Apply DiscountFIRE HOSENOZZLESwith 1” or 1 1/2”Female Pipe ThreadsINPUTPART# SIZE PRICEFHNZ100 1” $45.24FHNZ112 1 1/2” $76.47REFNO.1235678910101112131415161718192223252627283131323233343536Note:DESCReferedrawin* Repa(1) ReRef. 9ring 999920-150102$11.3150107$16.5350131$24.7550140$16.1750502$27.8450111$23.4350120$20.5250170$19.14 50500$18.0650503$53.04 50166$15.9650161$7.44Grimes, IA - (800) 351-1587 96Olathe, KS - (877) 829-8502

3381-0017Pressure Washer Spray Gun• Max. pressure: 2150 psi (150 bar)• Max. flow: 7.0 gpm (26.5 lpm)• Max. temp: 210° F (98.9° C)• 3/8” (F) NPT inlet; 1/4” (F) NPT outletPart# Description Price3381-0017 Spray Gun $36.26SPRAY GUNS 97Pressure Washer PartsSPRAY GUNS3381-0032Pressure Washer Spray Gun• Max. pressure: 4000 psi (280 bar)• Max. flow: 7.0 gpm, (26.5 lpm)• Max. temp: 300° F (148.9° C)• 3/8” (F) NPT inlet; 1/4” (F) NPT outletPart# Description Price3381-0032 Spray Gun $47.30Part# Length PSI Max Lance Description Price3365-0002 3000 Chrome Plated Dual Lance $96.313365-0004-24 24” 3600 Zinc Plated Bent Single $24.363365-0004-36 36” 3600 Zinc Plated Bent Single $30.313365-0004-47 47” 3600 Zinc Plated Bent Single $36.543365-0005-24 24” 3600 Zinc Plated Straight Single $21.243365-0005-36 36” 3600 Zinc Plated Straight Single $27.483365-0005-47 47” 3600 Zinc Plated Straight Single $33.71Orifice DiameterHigh-Low Variable Fan NozzlesNozzle Capacity (GPM) at Pump Pressure (PSI)Part# Price mm inches 600 700 800 900 100 1200 1500 1800 2000 25003324-2001.1 $36.54 1.10 .043 1.35 1.43 1.52 1.60 1.68 1.84 2.06 2.26 2.39 2.673324-2001.15 $36.54 1.15 .045 1.55 1.63 1.72 1.80 1.88 2.03 2.25 2.46 2.59 2.903324-2001.2 $36.54 1.20 .047 1.60 1.70 1.80 1.90 2.00 2.19 2.45 2.69 2.84 3.173324-2001.25 $36.54 1.25 .049 1.72 1.83 1.94 2.05 2.16 2.36 2.64 2.90 3.06 3.413324-2001.3 $36.54 1.30 .051 1.85 1.97 2..09 2.21 2.32 2.54 2.84 3.12 3.29 3.663324-2001.35 $36.54 1.35 .053 1.97 2.10 2.23 2.36 2.48 2.71 3.04 3.34 3.52 3.92TYPE MEG & WEGFor PressuresWashJet Nozzles 400 to 4000 PSISpray Angle0 o 15 o 25 o 40 o1/8” MEG NOZZLES1/8MEG0004 1/8MEG1504 1/8MEG2503 1/8MEG40031/8MEG0005 1/8MEG1505 1/8MEG2504 1/8MEG40041/8MEG0006 1/8MEG15055 1/8MEG2505 1/8MEG40051/8MEG0007 1/8MEG1506 1/8MEG250551/8MEG0008 1/8MEG1507 1/8MEG2506 1/8MEG40061/8MEG0010 1/8MEG1508 1/8MEG25065 1/8MEG40071/8MEG1509 1/8MEG2507 1/8MEG40081/8MEG1510 1/8MEG25081/8MEG25091/8MEG25101/8MEG2515Part # Price1/8MEG**** $7.511/8WEG**** $95.041/4MEG**** $7.91*Specify SizeQCMEG NozzlesPart#PriceQCMEG-15** All Sizes $103.91*Specify Capacity Size1/8” WEG NOZZLES1/8WEG25061/8WEG25071/8WEG2508List PricePlease Apply Discount1/4” MEG NOZZLES1/4MEG0005 1/4MEG2504 1/4MEG40021/4MEG25045 1/4MEG40031/4MEG2505 1/4MEG40041/4MEG2506 1/4MEG40061/4MEG2507 1/4MEG400651/4MEG2508 1/4MEG40071/4MEG40081/4MEG401024055 Adjustable High/Low WashJet providestwo pressure settings and adjustable sprayangles from solid stream to 80 o flat fan pattern.Available in 1/8” & 1/4” FPTPart# Size Price24055-** All Sizes $241.14Grimes, IA - (800) 351-1587 97Olathe, KS - (877) 829-8502