IPA FITTINGS - Velkommen til A/S J. Petersens Beslagfabrik

More documents

Recommendations

Info

20IPA No. 62536FITTING INSTRUCTIONSPROFILE - VEKA DANLINE 70:MARKX + 8660SASHX1616.2SIDE SASHBOTTOM FRAMEFIG. 1RIGHT HAND ILLUSTRATIONFIG. 22.555THE FITTING CAN BE USED ON BOTH TOPHUNG/TOPGUIDED AS WELL AS SIDEHUNG/SIDEGUIDED WINDOWS. ONTOPHUNG/TOPGUIDED WINDOWS THE RESTRICTOR IS PLACED IN THE BOTTOM OF THE SIDE FRAME AND THERECEIVER IS PLACED IN THE BOTTOM OF THE SIDE SASH. ON THE SIDEHUNG/SIDEGUIDED WINDOWS THERESTRICTOR IS PLACED IN TOP/BOTTOM FRAME ON THE OPPOSITE SIDE OF THE HINGES AND THE RECEIVER ISPLACED IN THE TOP/BOTTOM SASH OPPOSITE THE HINGES.TO ACCOMMODATE THE RESTRICTOR IT WILL BE NECESSARY TO REMOVE 60 MM OF THE WEATHER STRIP ASSHOWN ON FIG. 1.X-DIMENSION IS OPTIONAL. ON TOPHUNG/TOPGUIDED WINDOWS X MUST MINIMUM BE 7 MM. BY USING LARGERX-DIMENSION THE VENTILATION OPENING WILL BE EXTENDED.IMPORTANT: THE RECEIVER MUST BE MOUNTED SO THAT IT HITS THE MARK ON THE RESTRICTOR ARM WHENTHE WINDOW IS CLOSED. SEE FIG. 1OPERATING INSTRUCTIONS:1. OPEN THE WINDOW UNTIL THE RESTRICTOR ENGAGES.2 PULL THE SASH APPROXIMATELY 20 MM BACKWARDS.3. PRESS THE RESTRICTOR OUTWARDS AS YOU OPEN THE WINDOW.4. WHEN THE WINDOW IS CLOSED THE RESTRICTOR RE-ENGAGES AUTOMATICALLY.USE SCREW NO. 4.0MAINTENANCE:THE FITTINGS ARE NOT TO BE PAINTED. TEST THE OPERATION FROM TIME TO TIME. WHEN FITTING -LUBRICATE THE PIVOT/MOVABLE METAL PARTS OF THE MECHANISM WHILE ACTIVATING REPEATEDLY. HEREAFTERLUBRICATE MINIMUM TWICE A YEAR. DO NOT LUBRICATE THE ALUMINIUM RAILS. SEE ALSO INSTRUCTIONS ONPAGE 26 - 27.
21FRICTION STAY for windowsIPA No. 62527ORDERING NO.ABIPA NO.MATERIALSTEELW/O SPECIFICATIONSURFACEELECTROPLATEDSTANDARD PACKINGIN BOXES OF 25 PCS.A MMB MMMATERIAL MMSCREWAPPROX. WEIGHTKG / PC.62527 1 0 21 1 19 274 17X3 4.0 0.14■■■■■CONCEALED FITTINGOPENS UP TILL 100°FRICTION IN ALL POSITIONSADJUSTABLE FRICTIONANODIZED ALUMINIUM RAILIPA No. 62527FITTING INSTRUCTIONS100 274PROFILE - VEKA DANLINE 70:165FIG. 216.22.5513530FIG. 1ADJUSTABLE FRICTIONMAINTENANCE:THE FITTING ARE NOT TO BE PAINTED. TEST THE OPERATIONFROM TIME TO TIME. WHEN MOUNTING - LUBRICATE THEPIVOT/MOVABLE METAL PARTS OF THE MECHANISM WHILEACTIVATING REPEATEDLY. HEREAFTER LUBRICATE MINIMUMTWICE A YEAR. DO NOT LUBRICATE THE ALUMINIUM RAIL.SEE ALSO INSTRUCTIONS ON PAGE 26 - 27.FIG. 3
Page 1: IPA FITTINGSFOR VEKA DANLINE 702012
Page 4 and 5: 4FITTING INSTRUCTIONSVEKA DANLINE 7
Page 6 and 7: 6FITTING INSTRUCTIONSSUGGESTION - H
Page 8 and 9: 8DOOR HINGEIPA No. 61598CORDERING N
Page 10 and 11: 10IPA No. 62695FITTING INSTRUCTIONS
Page 12 and 13: 12IPA No.s 62544-52FITTING INSTRUCT
Page 14 and 15: 14IPA No. 62570-75FITTING INSTRUCTI
Page 16 and 17: 16IPA No. 62586-87FITTING INSTRUCTI
Page 18 and 19: 18IPA No. 62588FITTING INSTRUCTIONS
Page 22 and 23: 22FRICTION STAY for doorsIPA No. 63
Page 24 and 25: 24CASEMENT HOOKS, HOOK CATCHFITTING
Page 26 and 27: 26MAINTENANCEFITTING INSTRUCTIONSLU
Page 28 and 29: 28FITTING NOTESINSTRUCTIONS
Page 30: 30FITTING NOTESINSTRUCTIONS

IPA FITTINGS - Velkommen til A/S J. Petersens Beslagfabrik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?