IPA FITTINGS - Velkommen til A/S J. Petersens Beslagfabrik

More documents

Recommendations

Info

16IPA No. 62586-87FITTING INSTRUCTIONS16PROFILE - VEKA DANLINE 70:516.22.55FIG. 1 FIG. 2IPA NO. 62586 62587MAX. SASH WEIGHT KGS 40 50MAX. SASH HEIGHT MM 840 1340SCREW 4.0 4.0FITTING:1. CLOSE THE FITTING AND PLACE IT IN THE GROOVE OF THE SIDE FRAME.PLACE THE FITTING AGAINST THE TOP FRAME.PLACE AND FASTEN THE SCREW IN THE BOTTOM HOLE OF THE FITTING.OPEN THE FITTING AND FASTEN THE REMAINING SCREWS.FOR IPA NO. 62587: USE THE STOPPLATE TO REDUCE THE OPENING ANGLEOF THE SASH TO THE WANTED POSITION.2. PUSH THE SASH INTO ITS PLACE BY INSERTING IT BETWEEN THE FITTINGS,GUIDED BY THE GROOVES IN THE SASH, TILL THE SASH HITS THE STOPS OFTHE FITTING. THESE STOPS WILL GUARANTEE A 5 MM GAB BETWEEN FRAMEAND SASH. FASTEN THE FITTING STARTING WITH THE SCREW IN THE STOPBRACKET3. NOW THE FRICTION MAY BE ADJUSTED BY MEANS OF THE SCREWS IN THESLIDES. THE BEST RESULT FOR THE WINDOW MOVEMENT IS ACHIEVED BYEQUAL FRICTION AT EITHER SIDE.4. THE SASH CAN BE ADJUSTED ±1.5 MM UP OR DOWN. BEFORE ANYADJUSTMENT THE MOUNTING SCREWS IN THE BOTTOM IN EACH SIDE OFTHE FRAME HAVE TO BE LOOSENED. THEN ADJUST BY USING A TORX-20 KEYTO TURN THE ECCENTRIC SCREW. BY DELIVERY THE MARK ON THE ECCEN-TRIC SCREW IS IN A VERTICAL POSITION INDICATING THE 0-POSITION.WHEN THE MARK IS IN HORIZONTAL POSITION IN EITHER TOP OR BOTTOM,THE FITTING IS ADJUSTED TO IT’S MAX OF ±1.5 MM. AFTER THE ADJUSTMENTTHE MOUNTING SCREWS IN THE BOTTOM OF EACH SIDE ARE FASTENED.ECCENTRIC SCREWMARKFIG. 3MAINTENANCE:THE FITTINGS ARE NOT TO BE PAINTED. TEST THE OPERATION FROM TIME TO TIME. WHEN FITTING -LUBRICATE THE PIVOT/MOVABLE METAL PARTS OF THE MECHANISM WHILE ACTIVATING REPEATEDLY.HEREAFTER LUBRICATE MINIMUM TWICE A YEAR. DO NOT LUBRICATE THE ALUMINIUM RAILS. SEE ALSOINSTRUCTIONS ON PAGE 26 - 27.
ADJUSTABLE CANOPY STAYWITH ADJUSTABLE FRICTIONIPA No. 6258817AORDERING NO.MATERIALSURFACEIPA NO.STEELW/O SPECIFICATIONELECTROPLATEDSTANDARD PACKINGIN BOXES OF 5 SETSA MMB MMSCREWAPPROX. WEIGHTKG / SET62588 1 0 21 1 19 537 4.0 0.76B■■■■■VERTICALLY ADJUSTABLE ± 1.5 MMADJUSTABLE FRICTIONCONCEALED FITTINGSANODIZED ALUMINIUM RAILSTHE MOVEMENT GEOMETRY ENSURES MAXIMUMSEALING1/2 SÆTFIRE-ESCAPE OPENING:IPA NO. 62588500 MM FROM SASH HEIGHT 626 MM600 MM FROM SASH HEIGHT 726 MM
Page 1: IPA FITTINGSFOR VEKA DANLINE 702012
Page 4 and 5: 4FITTING INSTRUCTIONSVEKA DANLINE 7
Page 6 and 7: 6FITTING INSTRUCTIONSSUGGESTION - H
Page 8 and 9: 8DOOR HINGEIPA No. 61598CORDERING N
Page 10 and 11: 10IPA No. 62695FITTING INSTRUCTIONS
Page 12 and 13: 12IPA No.s 62544-52FITTING INSTRUCT
Page 14 and 15: 14IPA No. 62570-75FITTING INSTRUCTI
Page 22 and 23: 22FRICTION STAY for doorsIPA No. 63
Page 24 and 25: 24CASEMENT HOOKS, HOOK CATCHFITTING
Page 26 and 27: 26MAINTENANCEFITTING INSTRUCTIONSLU
Page 28 and 29: 28FITTING NOTESINSTRUCTIONS
Page 30: 30FITTING NOTESINSTRUCTIONS

IPA FITTINGS - Velkommen til A/S J. Petersens Beslagfabrik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?