IPA FITTINGS - Velkommen til A/S J. Petersens Beslagfabrik

12IPA No.s 62544-52FITTING INSTRUCTIONSPROFILE - VEKA DANLINE 70:1616.216.22.51655TOPFRAMEFIG. 2TOPSASHFIG. 3FRAMESIDESASHSIDEIPA NO. 62562SASHFITTINGON FRAME2.5FIG. 1 5FITTING:8,5 - 91. PLACE FITTING INTO BOTH SIDES OF THE FRAME.2. POSITION FITTING AGAINST TOP FRAME AND FASTEN.3. PLACE THE BEARING PLATE AGAINST THE TOP AND AGAINST THEALUMINIUM RAIL AND FASTEN.1704. INSERT THE SASH BETWEEN HINGE ARMS AND PUSH THE SASH AGAINSTTHE STOP BRACKET. FASTEN THE SASH STARTING WITH THE SCREW INTHE STOP BRACKET.5. THE SASH CAN BE OPENED TO ANY ANGLE. WITH LARGE OPENINGANGLE A LIGHT FRICTION CAN BE OBTAINED BY MEANS OF THEFRICTION SCREWS IN THE SIDES. THE FRICTION HAS TO BE THESAME ON BOTH SIDES. PLEASE NOTE THAT THE SASH IS NOTSECURED FOR HEAVY WINDS AND OTHER HEAVY INFLUENCE.IPA N0.FITTINGLENGTHMMMAX.WEIGHTKGS.62544 532 4562545 644 4562546 744 4562547 844 4562548 944 4562549 1044 4562550 1144 4562551 1244 4562552 1344 45USE THE LARGEST POSSIBLEFITTING6. FIT THE RESTRICTOR IPA NO. 62562 ON THE LEFT SIDE, SEE FIG. 1. FORPROPER FITTING AND OPERATION OF THE RESTRICTOR A CORRESPONDINGPIECE (170 MM) OF THE WEATHER STRIP HAS TO BE REMOVED.USE SCREW NO. 4.0.OPERATION INSTRUCTIONS:1. OPEN THE WINDOW - THE RESTRICTOR WILL AUTOMATICALLY RESTRICTTHE WINDOW.2. PULL THE SASH 20 MM - PRESS THE RESTRICTOR IN THE DIRECTION OFTHE ARROW AND OPEN THE WINDOW.3. WHEN THE WINDOW IS REVERSED FOR CLEANING, THE RESTRICTOR WILLLOCK AUTOMATICALLY. DISENGAGE AS MENTIONED IN POINT 2.MAINTENANCE:THE FITTINGS ARE NOT TO BE PAINTED. WHEN FITTING - LUBRICATE THEPIVOT/MOVABLE METAL PARTS OF THE MECHANISM WHILE ACTIVATINGREPEATEDLY. HEREAFTER LIBRICATE MINIMUM TWICE A YEAR. DO NOTGREASE THE ALUMINIUM RAILS. TEST THE OPERATION FROM TIME TO TIME.SEE ALSO INSTRUCTIONS ON PAGE 26 - 27.