Simulator Configuration Guide for Synopsys Models

Simulator Configuration GuideAppendix A: Using LMTV with Synopsys ModelsAUsing LMTV with Synopsys ModelsWhat is LMTV?LMTV stands for Logic Models to Verilog. This appendix is devoted to LMTV, and isnot about one simulator, like most chapters in this book. Instead, LMTV is a PLIapplication that is used to interface SmartModels, FlexModels, and DesignWareMemory Models with NC-Verilog and MTI Verilog. Note that VCS uses the SWIFTinterface and not LMTV.This appendix provides user and reference information for LMTV in the followingmajor sections:● “Static Linking with LMTV” on page 268● “LMTV Command-Line Switches” on page 270● “LMTV Commands” on page 271October 6, 2003 Synopsys, Inc. 267