Simulator Configuration Guide for Synopsys Models

Simulator Configuration GuideChapter 10: Using SystemC with Synopsys Models10Using SystemC with SynopsysModelsOverviewThis chapter explains how to use SmartModels and DesignWare Memory Models withSystemC. The procedures are organized into the following major sections:● “Setting Environment Variables” on page 261● “Using SmartModels with SystemC” on page 262● “Using DesignWare Memory Models with SystemC” on page 264Setting Environment VariablesBegin by setting environment variables as follows.1. Set the LMC_HOME environment variable to point to your SmartModel orDWMM installation tree, as follows:% setenv LMC_HOME path_to_models_installation2. Set the LM_LICENSE_FILE (for SmartModels) or SNPSLMD_LICENSE_FILE(for DWMM models) environment variable to point to the product authorizationfile, as shown in these examples:% setenv LM_LICENSE_FILE path_to_product_authorization_file% setenv SNPSLMD_LICENSE_FILE path_to_product_authorization_fileIf needed, you can put license keys for multiple products into the same authorizationfile. If you need to keep separate authorization files for different products, use acolon-separated list to specify the search path in your variable setting.October 6, 2003 Synopsys, Inc. 261