Simulator Configuration Guide for Synopsys Models

Simulator Configuration GuideChapter 8: Using Scirocco with Synopsys Models8Using Scirocco with SynopsysModelsOverviewThis chapter explains how to use SmartModels, FlexModels, DesignWare MemoryModels, and hardware models with Scirocco. The procedures are organized into thefollowing major sections:● “Setting Environment Variables” on page 191● “Using SmartModels with Scirocco” on page 193● “Using FlexModels with Scirocco” on page 196● “Using DesignWare Memory Models with Scirocco” on page 199● “Using Hardware Models with Scirocco” on page 201NoteScirocco has only 32-bit capabilities, and thus cannot simulate 64-bitSynopsys models.Setting Environment VariablesFirst, set the basic environment variables. In some cases the procedures that follow inthis chapter include steps for setting additional environment variables.1. Set the LMC_HOME environment variable to point to the location of yourSmartModel, FlexModel, or DesignWare Memory Model installation tree, asfollows:% setenv LMC_HOME path_to_models_installationOctober 6, 2003 Synopsys, Inc. 191