Simulator Configuration Guide for Synopsys Models

Chapter 7: Using QuickSim II with Synopsys ModelsSimulator Configuration GuideYou can put license keys for multiple products (for example, SmartModels andhardware models) into the same authorization file. If you need to keep separateauthorization files for different products, use a colon-separated list (UNIX).CautionDo not include la_dmon-based authorizations in the same file with snpslmdbasedauthorizations. If you have authorizations that use la_dmon, keepthem in a separate license file that uses a different license server (lmgrd)process than the one you use for snpslmd-based authorizations.3. Set MGC_HOME to the location of your Mentor installation, and make sureQuickSim II is set up properly in your environment.% setenv MGC_HOME path_to_Mentor_installation4. If you are using the hardware modeler, set the LM_DIR and LM_LIB environmentvariables, as shown in the following examples:% setenv LM_DIR hardware_model_install_path/sms/lm_dir% setenv LM_LIB hardware_model_install_path/sms/models: \hardware_model_install_path/sms/mapsIf you put your models in a directory other than the default of /sms/models, modifythe above variable setting accordingly.5. Depending on your platform, set your load library variable to point to yourplatform’s directory in $LMC_HOME, as shown in the following examples:Solaris:% setenv LD_LIBRARY_PATH $LMC_HOME/lib/sun4Solaris.lib:$LD_LIBRARY_PATHLinux:% setenv LD_LIBRARY_PATH $LMC_HOME/lib/x86_linux.lib:$LD_LIBRARY_PATHAIX:% setenv LIBPATH $LMC_HOME/lib/ibmrs.lib:$LIBPATHHP-UX:% setenv SHLIB_PATH $LMC_HOME/lib/hp700.lib:$SHLIB_PATHRunning 32-bit Models on 64-bit PlatformsIf you want to run 32-bit Synopsys models or tools on a 64-bit HP-UX or Solarisplatform, set the LMC_USE_32BIT environment variable to any value before invokingthe tool, as shown in the following example:% setenv LMC_USE_32BIT 1124 Synopsys, Inc. October 6, 2003