Simulator Configuration Guide for Synopsys Models

Simulator Configuration GuideChapter 7: Using QuickSim II with Synopsys Models7Using QuickSim II with SynopsysModelsOverviewThis chapter explains how to use SmartModels, FlexModels, DesignWare MemoryModels, and hardware models with QuickSim II. The procedures are organized into thefollowing major sections:● “Setting Environment Variables” on page 123● “Using SmartModels and FlexModels with QuickSim II” on page 125● “Using DesignWare Memory Models with QuickSim II” on page 151● “Using Hardware Models with QuickSim II” on page 164Setting Environment VariablesFirst, set the basic environment variables. If you are not using one of the model types,skip that step. In some cases the procedures that follow in this chapter include steps forsetting additional environment variables.1. Set the LMC_HOME environment variable to point to the location of yourSmartModel and FlexModel installation tree, as shown in the following example:% setenv LMC_HOME path_to_models_installation2. Set the LM_LICENSE_FILE or SNPSLMD_LICENSE_FILE environment variableto point to the product authorization file, as shown in the following example:% setenv LM_LICENSE_FILE path_to_product_authorization_file% setenv SNPSLMD_LICENSE_FILE path_to_product_authorization_fileOctober 6, 2003 Synopsys, Inc. 123