Cisco Catalyst 3750-X and 3560-X Series Switches Data Sheet

Cisco XPS 2200 Power Supply ConfigurationHeat DissipationNo Load (BTU/hr)Full Load (BTU/hr)2 x 1100WAC 205 13501 x 440WDC 115 6452 x 440WDC 155 990Physical and Environmental SpecificationsTable 23 lists the physical and environmental specifications for XPS-2200.Table 23.Physical and Environmental SpecificationsDescriptionSpecificationPhysical specifications H x W x D:Total input BTU (1000 BTU/Hr = 290W)Operating temperature1.73 x 17.5 x 20.5 in.(4.4 x 44.5 x 52.1 cm)Weight:19.8 lb (9.0 kg)8525 BTU/HrStorage temperature -40 to 70°CRelative humidity operating, noncondensingRelative humidity non-operating, noncondensingOperating altitude-5 to 45°C up to 5000ft elevation, -5 to 40°C up to 10000ft elevation5 to 95% non-condensing5 to 95% non-condensing10,000 ft. (3000m)Storage altitude 15,000 ft. (4750 m)Mean Time Between Failure (MTBF)222,000 hoursElectromagnetic compatibility certifications FCC Class A for North America: 47 CFR Part 15Safety certifications UL 60950-1VCCI Class A for Japan: V-3/2007.04CCC EMC for China on Spare Power Supplies: EN61000-3-2 (GB17625.1-1998)BSMI Class A for Taiwan: CNS13438KCC (formerly MIC) GB17625.1-1998 Class A for Korea: KN24/KN22AS/NZS Class A for Australia: CISPR22:2004 or EN55022Brazil, ANATEL In-Country approvalCE Class A for European Union: EN55022, EN300386, EN55024 (CISPR24)CAN/CSA 22.2 No.60950-1EN 60950-1CB to IEC 60950-1GB 4943Acoustic SpecificationsTable 24 lists the acoustic specifications of the Cisco XPS 2200.The following numbers represent the range of values for Idle, 50% and 100%:Table 24.Cisco XPS 2200 Acoustic SpecificationsCisco XPS 2200 Power Supply ConfigurationSound PressureSound PowerLpA (Typical) LpAD (Maximum) LwA (Typical) LwAD (Maximum)2 x 1100WAC 43 dB 63 dB 5.3 B 7.3 B2 x 715WAC 42 dB 61 dB 5.3 B 6.6 B© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 32 of 35