Download - Parent Directory - Foxit

After selecting the measuring tool, do any of the following in the pop up dialog box:To change the scaling ratio (such as 1:2) on the drawing areas, specify the appropriatenumbers in the tool dialog box. If necessary, change the unit of measurement next to thisratio.Check Measurement Markup in the tool dialog box if you want the lines you draw to appearas a comment. You can put the pointer over the measurement with the Hand tool selectedso that you can view the measurement and annotation you have drawn.Note: The object you draw will disappear when the Measurement Markup is deselected in thetool dialog box.Working on the Measurement ObjectAfter you complete the measurement, you are able to do further operations on it, such as move,resize, flip, and even work on it the way you work on comments.Moving the Measurement ObjectWith the Hand Tool or Annotation Selection Tool selected, click themeasurement object you want to move.Place the cursor over the object when the pointer changes into , hold and drag themouse to move it to the intended place.Changing the Length and Orientation of the Line SegmentWith the Hand Tool or Annotation Selection Tool selected, select one of theresize corners , you will see the pointer change into .Hold and drag the mouse to change the length and orientation of the line segment.Flipping the Measurement and AnnotationYou can reverse measurement and annotation of the object you draw.Before flippingAfter flipping65