Renner-Sondermann MagDrive Pumps

MAGNETICALLY COUPLEDCENTRIFUGAL PUMPSTOP QUALITYMADE IN GERMANY

SONDERMANN MAKES THE DIFFERENCE:Extremely safe products, extremely reliable service.This is our tradition. And this is why, for decades, expertshave trusted in SONDERMANN products and devices. Formany reasons such as …... LONG-STANDING EXPERIENCEAs early as 1961, SONDERMANN supplied the first magneticallycoupled centrifugal pump. The technological superiority we hadat that time has been our outstanding feature up to this day.Our special pumps are used in trade and industry all over theworld. Many years of acquiring know-how also find expressionin the services rendered for the benefit of our clients. Actually,there should be no user problem we do not resolve. This, also,is a matter of experience.... STRONG PARTNERSWorking now together with FLUX-Geräte GmbH, we are evenstronger than before. Our network of customer advisors hasexpanded and we are able to offer a wider range of problemsolutions. Whatever challenge of fluid delivery you face, the jobwill be done best by either a SONDERMANN or a FLUX pump.Just try us.... RELIABLE SERVICEYou will recognize a genuine SONDERMANN pump by itsoperating reliability. And it operates at your location!To achieve this, we make every effort to help you in caseof need. In Germany only, especially trained advisors areavailable at 14 sales locations. From there we coordinateour service operations so that we arrive at your place asquick as possible.... SPECIAL DESIGNS TO MEET INDIVIDUALDEMANDSPlease do not hesitate to tell us your specific type ofproblem. It is a fact that standard designs often are notadequate for the use required. As a consequence, weare best prepared for special designs – and are able torealize them in no time. If we exactly know your problem,we will be able to find a way to resolve it.This is also what SONDERMANN stands for.... EXCELLENT PRODUCT QUALITYSONDERMANN is on the outside. Made in Germany is inside.All our pumps and filters are entirely manufactured in Germany.This is certainly one reason for the superior quality of our products.Since we are very serious about each pump and filter,every single one is thoroughly checked in several stages before itleaves the company – with checks down the entire characteristiccurve. And of course in accordance with the ISO 9001 qualitystandard.2

TABLE OF CONTENTSOperating principle and constructional design of RM-type pumps 4 – 5Modular design; Type designation code of RM pumps 6 – 7Overview of non-self-priming pumps of the RM type 8 – 9Overview of self-priming pumps of RMS and RMB types 10 – 11RM pump of type 1, non-self-priming 12 – 13RM pump of type 1.5, non-self-priming 14 – 15RM pump of type 2, non-self-priming 16 – 17RM pump of type 2U, non-self-priming 18RM pump of type 2D, non-self-priming 19RM pump of type 3, non-self-priming 20 – 21RM pump of type 4, non-self-priming 22 – 23RM pump of type 4.5, non-self-priming 24 – 25RM pump of type 5, non-self-priming 26 – 27RMS pump of type 2.1, self-priming 28 – 29RMB pump of type 3.1, self-priming 30 – 31RM with priming tank/RM with frequency converter 32Accessories and optional equipment 33RM-Cool mini-pump 34 – 35Pump protectors; Flow monitors 36 – 37Sales representations in Germany and abroad 38 – 393

THE RM MAGNETICALLY COUPLED CENTRIFUGAL PUMP WITHOUT SHAFT SEALHIGH OPERATIONAL SAFETY, MINIMUM MAINTENANCETHE PROBLEM:It is a fact that every rotating sealing joint is wearing outwith time. And if a seal breaks down in the end, fluidleaks out. Such leakage is especially dangerous withhighly aggressive fluids and may result in heavy costs.When delivering non-lubricating fluids or fluids tending tocrystallize in particular, the use of mechanical shaft sealsrequires very complex arrangements like sealing chamberswith double-acting mechanical seals. These arrangementsare cost-intensive and require a lot of maintenance.What is more, the necessary maintenance intervals considerablyreduce the availability of the pump.THE SOLUTION:With SONDERMANN pumps of the RM type, permanentmagnets convey the motor drive to the pump impellerwithout any contact. Thus, there is no shaft exit requiringan appropriate sealing joint. The wet part and the drypart of the pump are hermetically separated from eachother by the rear casing so that leakages through wornsealings are definitely ruled out. The pump does not requireany maintenance since optimum sealing is ensuredby no need of sealing joints at all.THE UTILIZATION:SONDERMANN RM pumps are always used when perfectleakproofness and freedom from maintenance are indispensable.They are especially used to deliver aggressiveacids and bases, degreasing baths, chemicals, highlycorrosive liquids or fluids tending to cristallize.Electroplating shops, printed-circuit board manufacturers,purification plants and the photographic industry profitfrom SONDERMANN RM pumps. Wherever conventionalcentrifugal pumps with complex mechanical shaft sealsare required, SONDERMANN RM pumps are ideal for use.THE ADVANTAGES:• No mechanical sealing of the shaft.• Motor and pump are mechanically separated fromeach other.• Absolutely leakproof.• Free from maintenance.• Compact and space-saving design.• Suction and discharge nozzles are equipped withgroove and O-ring sealing to assure easy installationas well as leakproof and clean piping without anyleakage.4

OPERATING PRINCIPLECONSTRUCTIONAL DESIGN OF RM-TYPE PUMPSThe rear casing hermetically seals the pump chamberfrom the driving motor. The driving magnet rotatingoutside the rear casing transmits the torque of themotor to the inner magnet and thus to the impeller.The impeller is supported by sleeve bearings and acentering shaft made of high-purity oxide ceramic(99.7 %). Thus the bearing is extremely resistant towear. The use of other bearing materials is possible.To cool and lubricate the sleeve bearings, part of thefluid delivered passes the impeller and enters the gapbetween the inner magnet und the rear casing. Afterflowing through the sleeve bearings, the fluid leavesthe casing through special lubricant grooves in frontof the impeller.O-ringinner magnetdriving magnetlanternmotorimpellerpump housingO-ringball bearingsstarting ringof pump housingstarting ringof impellersleevebearingsstarting ringof rear casing5

MODULAR DESIGNWhatever you want to deliver,we have the right pump for you.CHOICE OF MATERIALSMetal-free and all-plastic making of our pumps isstandard since this design guarantees best protectionfrom corrosion.Housings may be also made of special stainless steel.We offer the right combination of materials for any fluidto be delivered, depending on its temperature.The following materials are available:Component symbol material temperature rangeAll components PP polypropylene 0 to +80 °Cin contact with fluid PVDF polyvinylidene fluoride -20 to +95 °CPPS polyphenylene sulphide -20 to +100 °Cstainless steel 1.4305, 1.4571 -20 to +100 °Coxide ceramic aluminium oxide 99.7 % -20 to +100 °CPTFE graphite PTFE graphite -20 to +100 °CGaskets EPDM ethylene-propylene-diene rubber -20 to +100 °CFKM fluorinated rubber -20 to +100 °CFEP coated perfluoroethylene/propylene copolymer -20 to +100 °CNBR nitrile-butadiene rubber -20 to +100 °C6

THE CHARACTERISTICS OF RM PUMPSDESIGNATION CODE OF RM PUMPSThe designation code of RM pumps consists of 11 positions which refer to the materials andcharacteristics of every component.For example:RM PP V K K K K 7/40 15 90 1 G– 1 2 3 4 5 6 7 8 9 10 11Use the table below to put together the ideal pump for your specific needs:• = standard usex = optionally available- = not availableNo. Description code material/design RM type 1 to 5RMS RMB1 1.5 2 3 4 4.5 5 2.1 3.11 pump housing and PP polypropylene • • • • • • • - •rear casing, PVDF PVDF • • • • • • • • •inner magnet, impeller RY PPS - - • - - - - • -2 O-ring of housing V FKM • • • • • • • • •E EPDM • • • • • • • • •P NBR x x x x x x x x xT FKM FEB-coated x x x x x x x x x3 Impeller starting ring K oxide ceramic 99.7 % • • • x x x x - xG PTFE graphite x x x • • • • - •4 Starting rings ofpump housing K oxide ceramic 99.7 % • • • • • • • • •5 Sleeve bearings K oxide ceramic 99.7 % • • • • • • • • •R PPS x x x x x x x - xG PTFE graphite x x x x x x x - xP P compound x x x x x x x -6 Centering shaft K oxide ceramic 99.7 % • • • • • • • • •7 Pump capacity .../... see performance chart8 Coupling length (in mm) 15 - • • - - - - - -30 • - • • - - - - •45 - - • - - - - • -60 - - - • • • - - -90 - - - - • • • - -9 Motor capacity (W/kW) ...10 Motor 1 for 1~, 230 V ac • • • x x - - x x3 for 3~, 400 V ac x x • • • • • • •11 Suction and G Whitworth screw-thread • • • • • • • • •discharge ports F mounting flange x x x x x x x x xA ANSI-flange x x x x x x x x xN NPT-thread x x x x x x x x xS hose connection x x x x x x x x x7

NON-SELF-PRIMING PUMPS OF THE RM TYPEOVERVIEW1 to 36 l/minRM 1 RM 1.5up to 5 m wc1 to 83 l/minup to 7 m wcRM 25 to 130 l/minup to 9 m wcRM 2D5 to 60 l/minup to 16 m wcTHE RIGHT PUMP FOR EVERY DELIVERY CAPACITY• Delivery rates of1 to 1,250 l/min• Delivery heads of5 to 60 m wcRM 3 RM 4 RM 4.5 RM 58 to 230 l/minup to 23 m wc10 to 400 l/minup to 36 m wc20 to 900 l/minup to 32 m wc30 to 1250 l/minup to 60 m wcCHARACTERISTIC CURVES OF RM-TYPE PUMPS60555050 Hz45540• head [m wc]3530252015344,551051,54,51450 rpm51 20 0 100 200 300 400 500 600 700 800 900 1000• capacity [l/min]8

TYPE DESIGNATION CODE OF RM PUMPSGENERAL OVERVIEW OF NON-SELF-PRIMING RM PUMPSRMtypemaximumdelivery rate[l/min]maximumdelivery head[m wc]maximumdensity[g/cm 3 ]motor capacity[kW]ports ofsuction anddischargematerialweight[kg]seepage11.522D344.552/203/305/355/457/555/507/408/6010/10010/11016/11010/12012/15014/18016/20020/20023/2009/35018/24020/30024/34027/40030/40035/20010/55018/55023/65027/75030/85040/30045/30060/30013/100035/1200152030607060708010011860160175190200200200305310325350400400250700750833833900300300300100012501.72.84.95.07.55.06.57.38.49.516.01013.014.016.219.023.09.017.520.024.527.030.036.09.018.023.028.032.040.046.060.013.035.01.851.51.31.81.251.31.72.51.42.21.351.52.01.51.91.51.851.31.31.152.01.11.841.221.81.051.31.841.41.01.31.51.01.31.01.41.11.51.81.151.851.11.51.61.351.81.451.01.151.11.11.11.251.61.10.060.060.060.120.120.090.180.250.1250.250.1250.180.250.180.250.180.250.250.370.370.550.370.550.550.750.751.11.50.750.751.11.51.11.51.52.22.23.04.03.04.03.04.02.23.04.04.05.57.53.04.05.54.05.512.5G 1 1 /4 / G 1G 1 1 /4 / G 1G 1 1 /4 / G 1 1 /4G 2 /G 1 1 /2G 2 1 /4 / G 2G 2 3 /4 / G 2 1 /4G 2 3 /4 / G 2 1 /4FF d110/FF d90PPPVDFVAPPPVDFVAPPPVDFPPSPPPVDFVAPPPVDFVAPPPVDFPPPVDF2.73.23.43.03.14.54.05.56.55.06.55.06.06.56.57.06.57.09.07.87.88.87.88.88.89.09.011.514.517.013.015.518.015.518.018.020.520.529.038.029.038.029.038.028.034.036.037.047.057.049.053.057.051.061.080.012-1314-1516-181920-2122-2324-2526-279

SELF-PRIMING PUMPS OF RMS AND RMB TYPESOVERVIEWRMS side-channel pumpA pump of the RMS type is theorder of the day to deliver smallvolume flow rates at high pressure.Delivery rate 1 to 22 l/minDelivery head up to 54 m wcSuction head up to 7 m wcRMB centrifugal pump with integrated priming tankBecause of the integrated primingtank, this centrifugal pump becomesa self-priming pump with thefollowing features:Delivery rate 8 to 250 l/minDelivery head up to 18 m wcSuction head up to 3.5 m wcRM pump with extra priming tank addedAll pumps of the RM type may becombined with an extra priming tankto be self-priming as well.Priming tanks are available in differentsizes ranging from 5 to 50 litres.When arranging the design, make surethat the volume of the priming tank isabout 1.5 times larger than the overallvolume of the suction-pipe runs to beevacuated.10

GENERAL OVERVIEW OF SELF-PRIMING RM PUMPSRM type maximum maximum maximum Motor material weight ports of seedelivery rate delivery head/ density capacity suction and page[l/min] suction head [g/cm 3 ] [kW] [kg] discharge[m wc]RMS 7 10/1 1.55 0.37 PVDF 8.59/834/172.0 0.55 9.07 12/3 1.55 0.37 PPS 6.52.0 0.55 7.0G 1 /2 28-2915 31/1 1.55 0.37 PVDF 7.5 internal thread2.0 0.55 8.016.2 38/7 1.55 0.37 PPS 7.52.0 0.55 8.0RMB 1.3 0.55 10.012/175 175 12/31.8 0.75PP11.015/225 220 17/3.5 1.65 0.75PVDF11.018/250 240 18/1.0 1.2 0.75 11.0G 2external thread30-31OUR SMALLESTMAGNETICALLY COUPLED CENTRIFUGAL MINI-PUMPRM-COOL TYPEThe magnetically coupledcentrifugal mini-pump ofthe RM-Cool type is the idealhigh-performance coolingsystem to absolutely reliablyremove heat from laserdevices, computers,plasma-arc cutters etc.Delivery rate up to 5 l/minDelivery head up to 2 m wcBrushless electronicallycontrolled motor11

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPSTYPE 1Delivery rate up to 30 l/minDelivery head up to 7 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP, PVDF andstainless steelProtection class IP 55ATEX design availableMagnetically coupled centrifugal pumps of type 1 are non-self-priming pumps that operate in horizontal position and are madein monobloc design. A magnetic coupling connects the pump to the motor and transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]water at 20 °CSTANDARD DESIGN:Housing, impeller and impeller magnetcoating are made of glass-fibre reinforcedPP plastic or PVDF or stainless steel.Sleeve bearings, starting rings andcentering shaft are made of 99.7 %pure oxide ceramic, and the O-ringsealing of the housing is made of eitherFKM or EPDM.(See table on page 7 for other materials.)Speed at 50 Hz = 2850 min -1Speed at 60 Hz = 3420 min -1Please indicate the voltage and frequencydesired when placing your order.12

NON-SELF-PRIMING RM-TYPE 1TECHNICAL DATASize 2/20 3/30 5/35 7/30Maximum delivery rate [l/min] 15 20 30 30Maximum delivery head [m wc] 1.7 2.8 4.9 7.1Maximum density [g/cm 3 ] * 1.85 1.5 1.3 1.25Motor capacity P2 at 50 Hz [kW] 0.060 0.060 0.060 –Motor capacity P2 at 60 Hz [kW] 0.072 0.072 0.072 0.072Voltage**Current rating230 V ac or 230/400 V three-phase current0.7 A with alternating current or 0.5/0.29 A with three-phase currentProtection class hose-proof according to IP 55Ports suction side G 1 1 /4 discharge side G 1Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDF stainless steelMaximum temperature 80 °C 95 °C 95 °CMaximum system pressure at 20 °C 1.0 bar 2.0 bar 8.0 barWeight 2.7 kg 3.2 kg 3.4 kg* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps. If in doubt, please consult us.**Other voltages or ATEX design available upon request.Position of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).Position of the discharge port: vertical position is standard (differing positions at 12 x 30° are possible,please indicate when placing your order).13

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPS TYPE 1.5Delivery rate up to 83 l/minDelivery head up to 10 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP, PVDF andstainless steelProtection class IP 55ATEX design availableMagnetically coupled centrifugal pumps of type 1.5 are non-self-priming pumps that operate in horizontal position and are madein monobloc design. A magnetic coupling connects the pump to the motor and transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]water at 20 °CSTANDARD DESIGN:Housing, impeller and impeller magnet coating are made of glass-fibre reinforced PP plastic or PVDF or stainless steel.Sleeve bearings, starting rings and centering shaft are made of 99.7 % pure oxide ceramic, and the O-ring sealing ofthe housing is made of either FKM or EPDM. (See table on page 7 for other materials.)14

NON-SELF-PRIMING RM-TYPE 1.5TECHNICAL DATASize 5/45 7/55 10/80Maximum delivery rate [l/min] 60 70 83Maximum delivery head [m wc] 5.0 7.5 10.0Maximum density [g/cm 3 ] * 1.80 1.25 1.0Motor capacity P2 at 50 Hz [kW] 0.120 0.120 –Motor capacity P2 at 60 Hz [kW] 0.144 0.144 0.180Voltage**Current rating230 V ac or 230/400 V three-phase current1.61 A with alternating current or 0.8/0.52 A with three-phase currentProtection class hose-proof according to IP 55Ports suction side G 1 1 /4 discharge side G 1Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDF stainless steelMaximum temperature 80 °C 95 °C 100 °CMaximum system pressure at 20 °C 1.5 bar 2.5 bar 8.0 barWeight 3.0 kg 3.1 kg 4.5 kg* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps.**Other voltages or ATEX design available upon request.Position of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).Position of the discharge port: vertical position is standard (differing positions at 12 x 30° are possible,please indicate when placing your order).15

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPS TYPE 2Delivery rate up to 118 l/minDelivery head up to 9.5 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP or PVDFProtection class IP 55Magnetically coupled centrifugal pumps of type 2 are non-self-priming pumps that operate in horizontal position and are madein monobloc design. A magnetic coupling connects the pump to the motor and transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]MOTOR CAPACITY**** nur als 2U mit unbelüfteten Motor lieferbarSTANDARD DESIGN:Housing, impeller and impeller magnet coating are made of glass-fibre reinforcedPP plastic or PVDF. Sleeve bearings, starting rings and centering shaft are madeof 99.7 % pure oxide ceramic, and the O-ring sealing of the housing is made ofeither FKM or EPDM.(See table on page 7 for other materials.)Speed at 50 Hz = 2850 min -1Speed at 60 Hz = 3420 min -1Please indicate the voltage and frequencydesired when placing your order.16

NON-SELF-PRIMING RM-TYPE 2TECHNICAL DATASize5/508/6010/110Maximum delivery rate [l/min]6080118Maximum delivery head [m wc]5.07.39.5Maximum density [g/cm 3 ]*1.51.5 2.02.0Motor capacity P2 at 50 Hz [kW]0.1250.180 0.2500.370Motor capacity P2 at 60 Hz [kW]0.1500.216 0.3000.444Current rating (400 V) [A]0.50.8 0.81.02Rated speed at 50 Hz [min -1 ]2.8502.8502.850Rated speed at 60 Hz [min -1 ]3.4403.4403.440Weight (approx.) [kg]5.06.0 6.57.5Dimension A (approx.) [mm]289289 304322Dimension D (approx.) [mm]112112 123123Dimension H (approx.) [mm]160.5160.5 168168Dimension B (approx.) [mm]continuously adjustable from 20 to 45 mmVoltage**230 V ac or 230/400 V three-phase currentProtection class hose-proof according to IP 55Ports suction side G 1 1 /4 discharge side G 1 1 /4Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDFMaximum temperature 80 °C 95 °CMaximum system pressure at 20 °C 1.0 bar 2.0 bar* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps. If in doubt, please consult us.**Other voltages available upon request.Position of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).Position of the discharge port: vertical position is standard (differing positions at 12 x 30° are possible,please indicate when placing your order).17

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPSTYPE 2UDelivery rate up to 130 l/minDelivery head up to 16 m wc(type 2D as twin pump)No shaft seal requiredFor aggressive and neutral liquidsWith non-ventilated motor so thatit is insensitive to vapour.Made of PP or PVDFProtection class IP 55Size5/507/408/6010/10010/11012/130Maximum delivery rate [l/min]607080100118130Maximum delivery head [m wc]5.06.57.38.49.512.0* Maximum density [g/cm 3 ]1.3 1.7 2.51.4 2.21.35 1.5 2.01.5 1.91.5 1.851.0Motor capacity P2 at 50 Hz [kW]0.09 0.18 0.250.12 0.250.12 0.18 0.250.18 0.250.18 0.25–Motor capacity P2 at 60 Hz [kW]0.108 0.216 0.300.14 0.300.14 0.216 0.240.216 0.300.216 0.300.37Current rating (400 V) [A]0.35 0.65 0.650.45 0.650.45 0.65 0.650.65 0.650.65 0.651.02Rated speed at 50 Hz [min -1 ]28502.8502.8502.8502.850–Rated speed at 60 Hz [min -1 ]34403.4403.4403.4403.4403.440Weight (approx.) [kg]4.0 5.5 6.55.0 6.55.0 6.0 6.56.5 7.06.5 7.07.5Dimension A [mm]235 250 265250 265250 265 265265 265265 265310Dimension B [mm]continuously adjustable from 20 to 45 mm* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps. If in doubt, please consult us.Position of the terminal box:standard position is on top(if you need it mounted on theright or the left, please indicatewhen placing your order).Position of the discharge port:vertical position is standard(differing positions at 12 x 30°are possible, please indicatewhen placing your order).18

NON-SELF-PRIMING RM-TYPE 2DThis pump is equipped with a nonventilated(0.25 kW) motor with twoshaft ends. A pump head of size8/60 is mounted to each side of themotor.You may use this pump as a twin pumpwith one driving motor to doubleits delivery rate to 2 x 80 l/min oras a twin pump in series connection(two-stage) to increase dischargepressure. Maximum delivery headthen is 16 m wc.SizeMaximum delivery rate [l/min]Maximum delivery head [m wc]Maximum density [g/cm 3 ]*Motor capacity P2 at 50 Hz [kW]Motor capacity P2 at 60 Hz [kW]Current rating (400 V) [A]Rated speed at 50 Hz [min -1 ]Rated speed at 60 Hz [min -1 ]Weight (approx.) [kg]8/602 x 807.31.02503000.65285034408.58/60 series connection60161.32503000.65285034409.0Voltage**230 V ac or 230/400 V three-phase currentProtection class hose-proof according to IP 55Ports suction side G 1 1 /4 discharge side G 1 1 /4Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDFMaximum temperature 80 °C 95 °CMaximum system pressure at 20 °C 2.5 bar 3.5 bar* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps.**Other voltages available upon request.STANDARD DESIGN:Housing, impeller and impellermagnet coating are made of glassfibrereinforced PP plastic or PVDF.Sleeve bearings, starting rings andcentering shaft are made of 99.7 %pure oxide ceramic, and the O-ringsealing of the housing is made ofeither FKM or EPDM.(See table on page 7 for othermaterials.)19

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPSTYPE 3Delivery rate up to 230 l/minDelivery head up to 28 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP, PVDF andstainless steelProtection class IP 55ATEX design availableMagnetically coupled centrifugal pumps of type 3 are non-self-priming pumps that operate in horizontal position and are madein monobloc design. A magnetic coupling connects the pump to the motor and transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]water at 20 °CSTANDARD DESIGN:Housing, impeller and impeller magnetcoating are made of glass-fibre reinforcedPP plastic or PVDF or stainless steel.Sleeve bearings, starting rings andcentering shaft are made of 99.7 %pure oxide ceramic, and the O-ringsealing of the housing is made of eitherFKM or EPDM.(See table on page 7 for other materials.)MOTOR CAPACITY[kW]20

NON-SELF-PRIMING RM-TYPE 3TECHNICAL DATASize10/12012/15014/18016/20020/20023/200 28/230Maximum delivery rate [l/min]160175190200200200230Maximum delivery head [m wc]1013.014.016.519.523.028Maximum density [g/cm 3 ]*1.61.15 1.81.1 1.651.22 1.41.2 1.31.61.5Motor capacity P2 at 50 Hz [kW]0.370.37 0.550.37 0.550.55 0.750.75 1.11.5–Motor capacity P2 at 60 Hz [kW]0.440.44 0.660.44 0.660.66 0.90.9 1.321.81.8Current rating (400 V) [A]1.021.02 1.61.02 1.61.6 2.22.2 2.83.253.25Rated speed at 50 Hz [min -1 ]290029002900290029002900–Rated speed at 60 Hz [min -1 ]3440344034403440344034403440Dimension A [mm]350350 366350 366366 366366 385400400Dimension B [mm]182182 198182 198198 198198 216230230Dimension H [mm]181181 181181 181181 181181 181130130Weight (PP/PVDF approx.) [kg]7.87.8 8.87.8 8.88.8 9.09.0 11.514.515.0Voltage**230 V ac or 230/400 V three-phase currentProtection class hose-proof according to IP 55Ports suction side G 2 discharge side G 1 1 /2Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDF stainless steelMaximum temperature 80 °C 95 °C 100 °CMaximum system pressure at 20 °C 2.5 bar 3.5 bar 8.0 bar* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps.**Other voltages available upon request.STANDARD DESIGN:Housing, impeller and impellermagnet coating are made of glassfibrereinforced PP plastic or PVDFor stainless steel. Sleeve bearings,starting rings and centering shaft aremade of 99.7 % pure oxide ceramic,and the O-ring sealing of the housingis made of either FKM or EPDM.(See table on page 7 for other materials.)Position of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).Position of the discharge port: vertical position is standard (differing positions at 12 x 30° are possible,please indicate when placing your order).21

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPS TYPE 4Delivery rate up to 400 l/minDelivery head up to 36 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP, PVDF andstainless steelProtection class IP 55ATEX design availableMagnetically coupled centrifugal pumps of type 4 are non-self-priming pumps that operate in horizontal position and are madein monobloc design. A magnetic coupling connects the pump to the motor and transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]water at 20 °CSTANDARD DESIGN:Housing, impeller and impeller magnetcoating are made of glass-fibre reinforcedPP plastic or PVDF or stainless steel.Sleeve bearings, starting rings and centeringshaft are made of 99.7 % pureoxide ceramic, and the O-ring sealingof the housing is made of either FKM orEPDM.(See table on page 7 for other materials.)MOTOR CAPACITY[kW]22

NON-SELF-PRIMING RM-TYPE 4TECHNICAL DATASize9/35018/24020/30024/34027/40030/40035/200Maximum delivery rate [l/min]305220 310 310325350400400250Maximum delivery head [m wc]9.017.52024.0273036Maximum density [g/cm 3 ]*1.41.0 1.3 1.51.0 1.31.0 1.41.1 1.5 1.81.15 1.851.1 1.5Motor capacity P2 at 50 Hz [kW]0.750.75 1.1 1.51.1 1.51.5 2.22.2 3.0 4.03.0 4.03.0 4.0Motor capacity P2 at 60 Hz [kW]0.90.9 1.32 1.81.32 1.81.8 2.642.64 3.6 4.83.6 4.83.6 4.8Current rating (400 V) [A]2.12.2 2.8 3.252.8 3.253.25 4.754.75 6.2 8.16.2 8.16.2 8.1Rated speed at 50 Hz [min -1 ]1450290029002900290029002900Rated speed at 60 Hz [min -1 ]1750344034403440344034403440Dimension A [mm]430400 457 474457 474474 530530 580 580580 580580 600Dimension H [mm]227220 220 220220 220220 230230 258 258258 258258 258Weight (PP/PVDF approx.) [kg]17.013.0 15.5 18.015.5 18.018.0 20.520.5 29.0 38.029.0 38.029.0 38.0Voltage**230 V ac or 230/400 V three-phase currentProtection class hose-proof according to IP 55Ports suction side G 2 1 /4 discharge side G 2Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDF stainless steelMaximum temperature 80 °C 95 °C 100 °CMaximum system pressure at 20 °C 5.0 bar 6.0 bar 10.0 bar* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps.**Other voltages available upon request.Position of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).Position of the discharge port: vertical position is standard (differing positions at 12 x 30° are possible,please indicate when placing your order).23

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPS TYPE 4.5Delivery rate up to 900 l/minDelivery head up to 35 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP or PVDFProtection class IP 55Magnetically coupled centrifugal pumps of type 4.5 are non-self-priming pumps that operate in horizontal position and are madein monobloc design. A magnetic coupling connects the pump to the motor and transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]±10% water at 20 °C 50 HzSTANDARD DESIGN:Housing, impeller and impeller magnetcoating are made of glass-fibre reinforcedPP plastic or PVDF. Sleeve bearings,starting rings and centering shaft aremade of 99.7 % pure oxide ceramic,and the O-ring sealing of the housingis made of either FKM or EPDM.(See table on page 7 for other materials.)MOTOR CAPACITY [kW]±10% water at 20 °C 50 Hz24

NON-SELF-PRIMING RM-TYPE 4.5TECHNICAL DATASize10/55018/55023/65027/75030/85035/800Maximum delivery rate [l/min]700750833833900900Maximum delivery head [m wc]9.018.022.028.03235Maximum density [g/cm 3 ]*1.61.35 1.81.451.01.151.0Motor capacity P2 at 50 Hz [kW]2.23.0 4.04.05.57.5–Motor capacity P2 at 60 Hz [kW]2.643.6 4.84.86.69.06.6Current rating (400 V) [A]4.96.25 8.18.111.014.513.8Rated speed at 50 Hz [min -1 ]14502900290029002900–Rated speed at 60 Hz [min -1 ]175034403440344034403440Weight [kg]28.034.0 36.037.047.057.048.5Voltage**230/400 V three-phase currentProtection class hose-proof according to IP 55Ports suction side G 2 3 /4 discharge side G 2 1 /4Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDFMaximum temperature 80 °C 95 °CMaximum system pressure at 20 °C 5.0 bar 6.0 bar* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps.**Other voltages available upon request.standard motorup to 4.0 kWstandard motorup to 7.5 kWPosition of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).Position of the discharge port: vertical position is standard (differing positions at 12 x 30° are possible,please indicate when placing your order).25

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPS TYPE 5Delivery rate up to 1.250 l/minDelivery head up to 60 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP or PVDFProtection class IP 55Magnetically coupled centrifugal pumps of type 5 are non-self-priming pumps that operate in horizontal position and are madein monobloc design. A magnetic coupling connects the pump to the motor and transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]±10% water at 20 °C 50 HzSTANDARD DESIGN:Housing, impeller and impeller magnetcoating are made of glass-fibre reinforcedPP plastic or PVDF. Sleeve bearings,starting rings and centering shaft aremade of 99.7 % pure oxide ceramic,and the O-ring sealing of the housingis made of either FKM or EPDM.(See table on page 7 for other materials.)MOTOR CAPACITY [kW]±10% water at 20 °C 50 Hz26

NON-SELF-PRIMING RM-TYPE 5TECHNICAL DATASize40/30045/30060/30013/100035/1200Maximum delivery rate [l/min]30030030010001250Maximum delivery head [mWS]4045601335Maximum density [g/cm 3 ]*1.11.11.11.25 1.61.1Motor capacity P2 at 50 Hz [kW]3.04.05.54.0 5.512.5Motor capacity P2 at 60 Hz [kW]3.64.86.64.8 6.615.0Current rating (400 V) [A]6.258.111.08.1 11.014.0Rated speed at 50 Hz [min -1 ]2900290029001450 14502900Rated speed at 60 Hz [min -1 ]3440344034401750 17503440Ports Suction sideG2 3 /4G2 3 /4G2 3 /4FF d110FF d110FF d110Ports discharge sideG2 1 /4G2 1 /4G2 1 /4FF d90FF d90FF d90Weight when made of PP approx. [kg]49535751 6180Weight when made of PVDF approx. [kg]56606652 6990Dimension A [mm]619625692680 740780Dimension H [mm]316316331– ––Dimension D [mm]194220250220 250260Voltage**Protection class230/400 V three-phase current230/400 V three-phase currentRecommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDFMaximum temperature 80 °C 95 °CMaximum system pressure at 20 °C 6.0 bar 6.0 barRM 13/1000 - 35/1200* To deliver liquids with a higherrelative density, we also offerall our pumps with smallerimpeller diameters which,however, reduce delivery ratesand heads of the pumps.**Other voltages available uponrequest.RM 40/300 - 60/300Position of the terminal box:standard position is on top(if you need it mounted onthe right or the left, pleaseindicate when placing yourorder).Position of the discharge port:vertical position is standard(differing positions at 12 x 30°are possible, please indicatewhen placing your order).27

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPSTYPE RMSSelf-priming side-channel pumpDelivery rate up to 17 l/minDelivery head up to 54 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PPS or PVDFProtection class IP 55PERFORMANCE CHARTS:H [ft] H [m wc]H [ft] H [m wc]Delivery rate at 50 HzDelivery rate at 60 Hzwater: 20 °C water: 20 °C28

SELF-PRIMING RMS TYPE 2.1TECHNICAL DATASizeDesignMaximum delivery rate [l/min]Maximum delivery head [mWS]max. suction head at 20 °C [m WS]max. vacuum at 20 °C [bar]Maximum temperature [°C]Maximum density [g/cm 3 ]*Motor capacity P2 at 50 Hz [kW]Motor capacity P2 at 60 Hz [kW]Current rating (400 V) [A]Rated speed at 50 Hz [min -1 ]Rated speed at 60 Hz [min -1 ]Weight approx. [kg]9/8PPS PVDF PPS PVDF PPS PVDF7 7 7 7 7 712 10 12 10 12 103.0 1.0 3.0 1.0 3.0 1.00.8 0.5 0.8 0.5 0.8 0.5100 80 100 80 100 801.55 1.35 2.00.37 0.37 0.550.44 0.44 0.660.7 0.7 1.01400 1400 14001700 1700 17008.5 8.0 9.034/17PPS PVDF PPS PVDF PPS PVDF16 15 16 15 16 1539 31 39 31 39 317.0 1.0 7.0 1.0 7.0 1.00.9 0.9 0.9 0.9 0.9 0.980 80 100 80 100 801.55 1.35 2.00.37 0.37 0.550.44 0.44 0.661.0 1.0 1.52800 2800 28003400 3400 34007.5 7.0 8.0Voltage**230 V ac or 230/400 V three-phase currentProtection class hose-proof according to IP 55Ports suction side IG 1 /2 discharge side IG 1 /2Material PPS PVDFHousing sections PPS PVDFImpeller PPS 99.7 % oxide ceramicLantern PP PPInner magnet coating PPS or PP PVDFCentering shaft, starting ring oxide ceramic 99.7 % oxide ceramic 99.7 %Sleeve bearings oxide ceramic 99.7 % oxide ceramic 99.7 %* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps.**Other voltages available upon request.internal threadPosition of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).29

RM MAGNETICALLY COUPLED CENTRIFUGAL PUMPSTYPE RMBCentrifugal pump with integratedpriming tankDelivery rate up to 240 l/minDelivery head up to 18 m wcNo shaft seal requiredFor aggressive and neutral liquidsMade of PP or PVDFProtection class IP 55Magnetically coupled centrifugal pumps of the RMB type are self-priming pumps with integrated priming tanks. They are madeof plastic, built in monobloc design and operate in horizontal position. A magnetic coupling connects the pump to the motorand transmits the power of the motor to the impeller.PERFORMANCE CHARTS:H [ft] H [m wc]WATER 20 °CSTANDARD DESIGN:Housing, impeller and impeller magnetcoating are made of glass-fibre reinforcedPP plastic or PVDF. Sleeve bearings,starting rings and centering shaft aremade of 99.7% pure oxide ceramic,and the O-ring sealing of the housingis made of either FKM or EPDM.(See table on page 7 for other materials.)MOTOR CAPACITY[kW]30

SELF-PRIMING RMB TYPE 3.1TECHNICAL DATASize12/17515/22518/250Maximum delivery rate [l/min]175225240Maximum delivery head [m wc]121718max. suction head at 20 °C [m wc]3.03.51.0Maximum density [g/cm 3 ]*1.3 1.81.651.2Motor capacity P2 at 50 Hz [kW]0.55 0.750.750.75Motor capacity P2 at 60 Hz [kW]0.66 0.90.90.9Current rating (400 V) [A]1.6 2.22.22.2Rated speed at 50 Hz [min -1 ]2800 280028002800Rated speed at 60 Hz [min -1 ]3400 340034003400Ports suction sideG2G2G2G2Ports discharge sideG2G2G2G2Weight approx. [kg]10 111111Dimension A [mm]490 500500500Voltage**230 V ac or 230/400 V three-phase currentProtection class hose-proof according to IP 55Recommended maximum flow rate suction side 1 m/s discharge side 3 m/sMaterial PP PVDFMaximum temperature 65 °C 85 °CMaximum system pressure at 20 °C 2.5 bar 3.5 bar* To deliver liquids with a higher relative density, we also offer all our pumps with smaller impeller diameters which, however,reduce delivery rates and heads of the pumps.**Other voltages available upon request.suctionsidemotor withterminal boxrotating by 90°dischargesideM8 mounting slot,maximum distance of mounting screws = 49 mmPosition of the terminal box: standard position is on top (if you need it mounted on the right or the left,please indicate when placing your order).31

RM PUMP WITH EXTRA PRIMING TANKTYPE RMINLET PORTAll non-self-priming pumps of the RM type maybe combined with an extra priming tank to beself-priming as well.SONDERMANN supplies you with the whole installationcompletely mounted to a base plate.Priming tanks are available in different sizes rangingfrom 5 to 50 litres. When arranging the design,make sure that the volume of the priming tank is about1.5 times larger than the overall volume of the suctionpiperuns to be evacuated.Base platematerialvolumedimensionspumpthread sizeABPP PVDF PVClitresdimensions dimensions Ø ECDtypesuctionside Fdischargeside G600 250x x x5250 310 2001G 1 1 /4“ G 1“600 270x x x5250 310 2001.5G 1 1 /4“ G 1“600 270x x x10560 500 2001.5G 1 1 /4“ G 1“600 270x x x10560 500 2002G 1 1 /4“ G 1 1 /4“600 270x x x15810 750 2002G 1 1 /4“ G 1 1 /4“1000 270x x x15810 750 2003G 2“ G 1 1 /2“1000 270x x x201060 1000 2003G 2“ G 1 1 /2“1000 300x30890 790 2503G 2“ G 1 1 /2“1000 300x25790 690 2504G 2 1 /4“ G 2“1000 300x30890 790 2504G 2 1 /4“ G 2“1200 300x30890 790 2504.5G 2 3 /4“ G 2 1 /4“1200 400x501175 1075 3004.5G 2 3 /4“ G 2 1 /4“RM PUMP WITH INTEGRATED FREQUENCY CONVERTERIF SEVERAL DELIVERY RATES ARE REQUIREDSPEED CONTROL IS USED TO PRECISELY SETTHE OPERATING POINT DESIRED.Features:• Power ranges: 0.37 to 1.1 kW• Voltage: 230 V single-phase, 50 or 60 Hz• The speed rate is set either by a signal of an imposedcontrol unit or by the control panel mounted to the motor.• The frequency converter is perfectly tuned to thecharacteristic of the pump.• This operating principle saves much energy in contrast toadjusting delivery rates by means of flow-control valves.32

ACCESSORIES AND OPTIONAL EQUIPMENT TO RM PUMPSACCESSORIES TO THE MOTOR:Pilotherm or PTC thermistorON/OFF switch with cable 2.5 m long and plug (only with 230 V ac)Protective motor switch with ON/OFF switch, mounted and wired to the terminal boxThree-phase connection cable 5 m long with CEE plug of 5 x 16 A, completely installedO-RING SEALINGS TO SUCTION AND DISCHARGE PORTSTypeO-ring to suction sideO-ring to discharge sideFKMEPDMFEP-coated[mm][mm]FKM1, 1.526 x 3.5 mm21 x 3.0 mmXXX230 x 3 mm26 x 3.5 mmXXX348 x 3.5 mm31.35 x 3.53 mmXXX3.140.6 x 5.3 mm40.6 x 5.3 mmXXX453.5 x 3.5 mm40 x 5 mmXXX4.565 x 4 mm47 x 5.3 mmXXXTHREE-PIECE HOSE CONNECTIONS WITH SPIGOT NUT AND HOSE NIPPLE INCLUDING O-RINGSThread size hose suitable for suction ports suitable for suction portsPPnipple of the foll. pump typesof the foll. pump types materialPVDFmaterialG 118211, 1.5XX18G 1 1 /4211, 1.5, 22XX26301“G 1 /21 1 /4“3XX1 1 /2“1“G 21 1 /4“3, 3.13.1, 4XX1 1 /2“2 “G 2 1 /41 1 /2“2 “44.5XXFLANGES TO SCREW ONTO THREADED PORTS INCLUDING O-RINGSOne set = 1 flange to the suction side, 1 flange to the discharge sideTypenominal diameter ofnominal diameter ofsuction portdischarge portPPmaterialPVDFmaterial2DN 20 PN 10DN 20 PN 10XX3DN 32 PN 10DN 25 PN 10XX4DN 50 PN 10DN 40 PN 10XX5DN 65 PN 10DN 50 PN 10XXWe also offer you a wide range of accessories to perfectly complete the installation of SONDERMANN pumps.These accessories include, for example, plastic spigot nuts, hose nipples, plastic screws, filter plates, suction screen filters,differential pressure switches etc. Do not hesitate to ask us for advice! We would be glad to help you.33

MAGNETICALLY COUPLED CENTRIFUGAL MINI-PUMPTYPE RM-COOLTYPE 0.5Brushless electronicallycontrolled motorAdjustable speed of 1 to3,240 min -1For short-term and continuousoperationMade of PPS, PP and PVDFDelivery rate up to 5 l/minDelivery head up to 2 m wcNo shaft seal requiredThe magnetically coupled centrifugal mini-pump of the RM-Cool type 0.5 is the ideal high-performance cooling systemto absolutely reliably remove heat from laser devices and computers and is also used in process engineering and solarenergy technology etc.PERFORMANCE CHARTS:H [ft] H [m wc]WATER 20 °C34

RM-COOL TYPE 0.5TECHNICAL DATAMotorBrushless electronically controlled motorVoltage12, 24 or 48 V dc; direct connection to the power supply unit of a PC, for exampleMotor capacity7 WattSpeed adjustable from 1 to 3240 min -1Delivery rateup to 5 l /minDelivery headup to 2 m wcPorts suction side/discharge side: G 1 / 8”MaterialPPS, PP or PVDFBearingsoxide ceramicSealingFKM, EPDM or NBRTemperature range up to 100 °CWeightapprox. 175 – 215 gOutInelectric supplyDimensions for mounting into a case housing35

ELECTRONIC PROTECTIONFOR MAGNETICALLY COUPLED CENTRIFUGAL PUMPSElectronic monitoring of motor currents protects the pump fromdry running, overheating and overload.If the above mentioned malfunctions cannot be completely ruledout with your installation, you should use an electronic protectorto switch off the pump before it is damaged.Such protector will prevent the pump from being damaged andthus avoids down time and resulting costs. Once the cause ofthe malfunction is eliminated, the pump immediately is ready foroperation again.The protectors electronically evaluate the operating conditionsof the pump and include a contactor to switch off the pump ifnecessary. They are easy to install to the power supply unit ofthe pump. As it is not necessary to build them into pipe runs,the protectors are ideal also to retrofit existing installations.Three different types of the electronic pump protector are available.TYPE 1FOR PROTECTION FROM DRY-RUNNINGA cosÊ controller monitors the phase shift between current and voltage in the motor running.As soon as there is no more liquid in the pump, the cosÊ controller responds and switches off the pumpmotor. A red lamp at the switchgear box lights up to indicate the fault. Please note that type 1 is a meredry-running protector. To protect your pump against overheating, you should use type 1.5 or type 2.TYPE 1.5 FOR PROTECTION FROM DRY-RUNNING AND OVERHEATINGAn overload controller monitors the actual power of the pump motor and has two switchingthresholds defined:• dry-running• overheatingIf the pump enters one of these two inacceptable operating conditions, the pump motor is switched offand a red lamp at the switch box lights up to indicate the fault. Additional indicating lamps to distinguishthe faults from each other are optionally available.TYPE 2FOR OVERALL PUMP PROTECTIONAn overload controller with analogue output monitors the actual power of the pump motor and hasfour switching thresholds defined:• dry-running (fault, the motor is switched off)• overheating (fault, the motor is switched off)• overload(fault, the motor is switched off)• filter contaminated (warning)If the filter is contaminated, the red lamp only signals a warning, i.e. the pump motor is not switched off.The different operating conditions may be transmitted to an imposed controller by means of floatingcontacts. Additional indicating lamps at the switchgear box to distinguish the faults from each other areoptionally available.36

FLOW MONITORSFOR SIMPLE AND COST-EFFECTIVE MONITORINGCharacteristics:The housing is made of polypropylene or PVDF.Flow monitors are to be built into the discharge pipes ofmagnetically coupled centrifugal pumps of types 2 to 4.Every flow monitor has an integrated float switch anda reed contact. A spigot nut at the inlet side of the flowmonitor is used to screw it to an external thread withO-ring sealing.The outlet side of the flow monitor is equipped witha grooved external thread to take the O-ring seal.The necessary O-rings are optionally available.When ordering a flow monitor, please indicate thedensity of the fluid delivered.TypeSizePP materialPVDF materialO-ringFKM materialEPDM material2d 25 DN 20 – G 1 1 /4“xx26 x 3.5xx3d 32 DN 25 – G 1 1 /2“xx31.35 x 3.53xx4d 40 DN 32 – G 2“xx40.6 x 5.3xxThe standard PP design is suitable to deliver low-viscosity fluids resembling water with densities of 0.8 to 1.5.The standard PVDF design is suitable to deliver low-viscosity fluids resembling water with densities of 0.8 to 1.84.Electrical switchgearwired within an ISO housing including contactor, relays and hand-actuated switches, suitable for all sizes.Electrical switchgear as abovebut in addition with built-in time-limit relay to be manually adjusted.The wiring of the flow monitor to the electrical switchgear is provided by the customer and not includedin the scope of delivery.37

SALES AREAS IN GERMANYThanks to our wide distribution networkall over Germany, you will always findSONDERMANN pumps at close range.54BREMENMÜNSTERKÖLN2KIELROSTOCKHAMBURGHANNOVER3171MAGDEBURG15 16ERFURTBERLINDRESDEN610FRANKFURTWÜRZBURGSAARBRÜCKENKARLSRUHESTUTTGART7.17.28FREIBURG9NÜRNBERGMÜNCHEN1BERLIN/BRANDENBURGSONDERMANNPUMPEN + FILTER2 HAMBURG3 HANNOVER 4Rolf-Dieter ThelenDipl.-Ing. (FH) Ulrich PöhlsBREMEN/MÜNSTERDipl.-Ing. (FH) Dieter Röder5HEADQUARTERCOLOGNESONDERMANNPUMPEN + FILTERGMBH & Co. KGFalkenweg 9Alte Bemeroder Str. 122Sögelner Str. 5GMBH & Co. KGAugust-Horch-Straße 425337 Elmshorn30539 Hannover49565 BramscheAugust-Horch-Straße 451149 ColognePhone +49 (0) 4121/7 25 93Phone +49 (0) 5 11/517151Phone +49 (0) 54 61/96 90 2051149 ColognePhone +49 (0) 22 03/93 94-0Fax +49 (0) 4121/7 25 93Fax +49 (0) 5 11/544 59 29Fax +49 (0) 54 61/96 90 21Phone 0 22 03/93 94-0Fax +49 (0) 22 03/93 94 48Mobile +49 (0) 172/628 77 82Mobile +49 (0) 172/628 77 83Mobile +49 (0) 170/180 25 46Fax 0 22 03/93 94 48info@sondermann-pumpen.der.thelen@flux-pumpen.deu.poehls@flux-pumpen.ded.roeder@flux-pumpen.deinfo@sondermann-pumpen.de7.1 7.26 FRANKFURTSTUTTGARTFREIBURGMUNICH9Robert HöflingHorst LaidigJürgen BäuchleMarkus WernerOdenwaldring 2563500 SeligenstadtPhone +49 (0) 61 82/15 83Fax +49 (0) 61 82/9619 27Mobile +49(0)177/5834969r.hoefling@flux-pumpen.deBuchfinkenweg 770563 StuttgartPhone +49 (0) 711/7 801129Fax +49 (0) 711/7 80 43 29Mobile +49 (0) 172/407 39 40h.laidig@flux-pumpen.deAm Kräherwald 15570193 StuttgartPhone +49 (0) 7 11/2 84 28 26Fax +49 (0) 7 11/2 84 2919Mobile +49 (0) 172/628 77 80j.baeuchle@flux-pumpen.deHauptstraße 5a82544 EglingPhone +49 (0) 8176/15 45Fax +49 (0) 8176/99 70 23Mobile +49 (0) 172/83115 96m.werner@flux-pumpen.de8NÜRNBERGDipl.-Ing. (FH) W. SchauerMargaretenweg 391166 GeorgensgmündPhone 0 9172/7752Fax 0 9172/70 01 28Mobile 0172/628 77 81w.schauer@flux-pumpen.de10MANNHEIMSigmar Koschorreck15 THURINGIA/ 16SAXONY-ANHALTSAXONYDipl.-Ing. Gerd Hanauska17MECKLENBURG-WEST POMERANIARolf-Dieter ThelenSchulstraße 10Martin ReichertWasserschänkenstraße 32Falkenweg 967550 WormsTalweg 1209247 Chemnitz/Röhrsdorf25337 ElmshornPhone +49 (0) 62 42/9150 9175433 MaulbronnPhone +49 (0) 3722/50 25 75Phone +49 (0) 4121/7 25 93Fax +49 (0) 62 42/9150 95Phone +49 (0) 70 43/101-420Fax +49 (0) 3722/50 56 03Fax +49 (0) 4121/7 25 93Mobile +49(0)172/6290061Fax +49 (0) 70 43/101-444Mobile +49 (0) 172/628 77 84Mobile +49 (0) 172/628 77 82Sigmar.Koschorreck@t-online.deMobile +49 (0) 174/166 57 62g.hanauska@flux-pumpen.der.thelen@flux-pumpen.dem.reichert@flux-pumpen.de38

SALES REPRESENTATIONS ABROADSONDERMANN pumpsare present all over the world.Are you looking for an opportunityto buy our products in your country?Just give us a call at our Cologneheadquarters.We will be pleased to help you.SONDERMANNPUMPEN + FILTER GMBH & Co. KGAugust-Horch-Strasse 4D-51149 ColognePhone +49 22 03-93 94-0Fax +49 22 03-93 94-48info@sondermann-pumpen.dewww.sondermann-pumpen.deINNOVATORS INFLOW TECHNOLOGYFor more than 25 years,SONDERMANN’S specialist consultantshave also advised you on the comprehensiverange of FLUX pumps and theiraccessories. FLUX covers all ranges oflaboratory, barrel, container and thickmatter pumps, pneumatic diaphragmpumps and liquid volume meters. Weinvite you to also benefit from this widerangecompetence for doing a good job.For more information visit us atwww.flux-pumpen.de39

SRM 056/3 ESONDERMANNPUMPEN + FILTER GMBH & Co. KGAugust-Horch-Strasse 4D-51149 ColognePhone +49 (0) 22 03/93 94-0Fax +49 (0) 22 03/93 94-48info@sondermann-pumpen.dewww.sondermann-pumpen.deSubject to technical alterations