2014 Buyers' Guide - Filtration News

Intelligent rotary pleater along with pitching systemcan produce such filter packs rangingfrom 1” to 6” in width and up to 40”.INLINE PLEATED PACK CUTTERThe Inline Pleated Pack Cutter is aunique offering for filter manufacturerswho require slitting the material afterpleating. This requirement is criticaldue to very tight tolerances, the behaviorof the material while pleating, andthe ability to run multiple webs for increasedproductivity.A2Z Inline Pleated Pack cutter allowsusers to cut the multi layer packs afterthe media is pleated in various widths,with accuracies of ± 0.3mm (± 0.012”).This helps in providing an accurate cutto size filter to meet critical dimensionsup to seven layers, and can cut materialssuch as wire mesh, nylon mesh, membrane,spun bonds, glass fibers, etc.PLEATER WITH PITCHING SYSTEMThe A2Z Intelligent Rotary Pleaterwith pitching system has the ability tochange pleat depth on the fly. The optionof single or twin indenting and theability to pleat both cellulose and nonwovenmedias are provided. Afterpleating, the equipment pitches thepleat and applies paper or hotmeltstrips on the top or bottom or bothsides of pleat. The equipment automaticallycuts the pack based on the lengthor number of pleats. The wholeprocess is achieved without any manualintervention. The equipment is designedto pleat up to 4¼” pleat height.This process is used to manufacturecabin air filter as well HVAC panel filters.Due to its ease of use, versatility and quickreturn on investment, the equipment ispopular with filter manufacturers.Blade pleater for pleat depth down to 0.1 inch or 2.5 mmPLEAT DEPTHS DOWN TO 0.1 INCHA2Z Intelligent Blade Pleater is usedfor very precise pleating including pleatdepths down to 2.5mm (0.1”) as shownin photo above .The advantages of this equipmentare: quick set up and pleat depth rangesfrom 2.5 -152.5mm (0.1” - 6”), givinga quick return on the investment. Forpleating of small steel strips, a provisionis provided to remove the pleatedpack from the feed side; therefore, anoperator is not required to move to thedischarge side to remove the pleat pack.Each of the above systems usesAllen Bradley® or Siemens® Controls,Servo Motors, and other ”state of theart” inputs to provide a perfect fit to thepurpose product.A2Z excels in providing superiorvalue and durable, globally serviceableproduct lines. Components aresourced from leading global suppliersto ensure ease of availability and troublefree maintenance. Features suchas remote access for servicing and upgradation of equipment software coupledwith pictorial manuals makeA2Z products easy to use, efficientand a great value.For more information, visit www.a2zfiltration.com or contact:Design Centre & Manufacturing FacilityD-1, Infocity, Phase-II, Sector-33,Gurgaon 122 001, INDIAPhone: +91 (124) 478 8700 • Fax: +91(124) 400 1388Skype ID: a2zfiltrationEmail: marketing@a2zfiltration.com, a2zfiltration@vsnl.net, sales@a2zfiltration.comFNwww.filtnews.com • August 2013 • 7