Tate Access Floors, Inc.

More documents

Recommendations

Info

B. Manufacturer’s Qualifications: Manufacturer shall have been engaged in the fabrication of accessflooring of types and sizes required and whose products have been in satisfactory use in similarservice for not less than 10 years. Like items of material provided herein, shall be the products of onemanufacturer in order to achieve standardization for appearance, maintenance and replacement.C. Installer: Access flooring installer shall be trained, approved by the floor system manufacturer andshall have successfully completed within the last three years, at least (3) three installations similar intype and size to that of this project.D. [Optional] Field Samples: Prior to the Pre-Construction Conference, provide a field sample of accessflooring, not less than 100 square feet in an area designated by the Architect/Engineer. Utilize thesame materials and installation methods in the sample as required for the final work. Sample areasshall serve as the standard for materials, workmanship and appearance for such work throughout theproject and shall remain apart of the final work.E. Pre-Installation Meeting: Prior to installation of the Clean Room Access flooring system, and atConstruction Manager’s discretion, meeting shall be held to coordinate Access Floor System workwith other trades. Meeting shall include Owner, Architect/Engineer, Construction Manager, accessflooring system Contractor, and other subcontractors whose work requires coordination with theClean Room access flooring system.1.7 Delivery, Storage and Handling1.9 SubmittalsA. All access floor panels and understructure must be cleaned, inspected and packaged in a clean anddebris free environment.1. [Optional] Cleanroom pack for panels: Panels shall be individually cleaned and individuallypacked within a moisture absorbing plastic bag sealed with tape. The panels shall then placed ona pallet with plastic sheet separators between each bagged panel to prevent damage to bags. Theentire stack shall then covered in a plastic bag and cardboard corner protectors shall be added tothe corners. A cardboard sleeve shall be used to cover the entire stack of panels and shall thenbe banded tightly. [Specify Cleanroom pack.]2. [Optional] Cleanroom pack for understructure: Understructure shall be individually cleaned andpacked within a shipping carton lined with a moisture absorbing plastic bag. Plastic sheetseparators shall be placed between layers of understructure. The bag shall be sealed and thecarton shall be closed and tightly banded. [Specify Cleanroom Pack.]B. Deliver and store materials in their original unopened packages.A. Provide samples of each type of floor panel and pedestal illustrating finishes and color.B. Detail sheets, for each proposed product type, which provides the necessary information to describethe product and its performance.C. Test reports, by an independent testing laboratory, certifying that component parts perform asspecified.PART 2 - PRODUCTS2.1 Manufacturers4 R-11/08
A. TATE ACCESS FLOORS, INC.B. Alternative products shall meet or exceed all requirements as indicated herein and must receive priorwritten approval by the architect or designer.C. Access floor manufacture shall be ISO9001: 2000 certified demonstrating it has a robust and welldocumented quality management system with continuous improvement goals and strategies.D. Access floor manufacturer’s facilities shall be ISO14001:2004 certified demonstrating that theymaintain an environmental management system.2.2 Support Components [Specify All Aluminum or Aluminum/Steel Pedestals]All Aluminum Pedestal Assembly:A. Aluminum Pedestal Head Assembly:1. Pedestal assemblies shall be corrosive resistant, all aluminum construction, and shall provide anadjustment range of +/- 1" for finished floor heights 9" or greater.2. Pedestal assemblies shall provide a means of leveling and locking the assembly at a selectedheight, which requires deliberate action to change height setting and prevents vibrationdisplacement.3. Aluminum pedestal head shall have universal feature, i.e. one head for cornerlock, stringerless,bolted stringer without effecting the height. The aluminum head shall have a 1 inch diameteraluminum threaded rod, which includes a specially designed adjusting nut, pressed into it. Thenut shall engage the pedestal base assembly, such that deliberate action is required to change theheight setting.4. Aluminum threaded rod shall provide a specially designed anti-rotation device, such that whenthe head assembly is engaged in the base assembly, the head cannot freely rotate.5. Provide conductive vinyl grounding pad on the head assembly for electrical grounding andconductivity.B. Aluminum Base Assembly: [Specify 1, 2, or 3]1. Type A Aluminum Pedestal Base Assemblya. Aluminum pedestal base assembly shall consist of a die cast aluminum base with 25 inchesof bearing area, pressed into a hard drawn 1-1/2 diameter aluminum tube on one end and analuminum collar at the other which is designed to engage the head. (Note: Depending onseismic zone and environmental conditions, the height of this pedestal assembly ranges from9-36 inch FFH.)2. Type B Aluminum Pedestal Base Assemblya. Aluminum pedestal base assembly shall consist of a die cast aluminum base with 36 inchesof bearing area, pressed into a hard drawn 1-1/2 diameter aluminum tube on one end and analuminum collar at the other which is designed to engage the head. (Note: Depending onseismic zone and environmental conditions, the height of this pedestal assembly ranges from9-48 inch FFH.)3. Type 800 Aluminum Pedestal Base Assembly5 R-11/08
Page 1: Tate Access Floors, Inc.FF 3000 Hea
Page 6 and 7: a. Aluminum pedestal base assembly
Page 8 and 9: Static Dissipative Tile Options:3.
Page 10: E. Cutting and Trimming of Parts:1.

Tate Access Floors, Inc.

Create successful ePaper yourself

Delete template?

Save as template?