Brook Crompton WP premium efficiency motors - Lesl.co.uk

Rotating Electrical MachinesWP premiumefficiency motorsFrames 80 to 355L2104E

2104E Issue 2.2eWP premium efficiency motorsWP premium efficiency motors80 to 355L2Brook CromptonBrook Crompton is a leading manufacturer ofelectric motors for the global industrialmarket, with motor solutions which benefit awide range of customers.Our products are used in almost everyindustrial activity including water treatment,building services, chemical/petrochemicals,general processing and manufacturing wherethey drive fans, pumps, compressors andconveyors, amongst other things.Brook Crompton incorporates many wellknown names including Brook Motors,Crompton Parkinson, Electrodrives, Newman,Bull Electric and Hawker Siddeley ElectricMotors.We have extensive stocks of motors aroundthe world, backed-up by a network ofdistributors, ensuring excellent local supportwherever needed.Quality assuranceStringent quality procedures are observedfrom first design to finished product inaccordance with the ISO9001 documentedquality systems.All of our factories have been assessed tomeet these requirements, a further assurancethat only the highest possible standards ofquality are accepted.WP premium efficiency motorsThe Brook Crompton WP motor range coversproducts with outputs from as little as0.75kW to 400kW in frame sizes 80 to 355L.They are suitable for use within a diverserange of applications from food and drink tochina clay production. From roller tabledrives to refrigeration. Many applicationsoften have adverse operating conditionsincluding repeated starting and occasionaloverloading; the ‘WP’ range is well suited tothese situations. A virtual ‘go anywhere’motor, this cast iron range has a full 2-yearguarantee.Benefits include:• high efficiency for low running costs• high reliability for long life• low noise levels• cool running for long insulation life• all applicable motors fall within the EFF1band of the European efficiency labellingscheme• Eurovoltage: 400V ±10%• dual frequency: 50Hz and 60Hz• high power factors• high torque with smooth acceleration andlow current• ease of maintenance• IP55 protection• 4-position cable entry• 2-year warrantyEfficiencyBrook Crompton are an approvedmanufacturer of ac electric motors within theUK Government’s Enhanced CapitalAllowance (ECA) scheme.A wide range of single and multi-speedmotors are included on the UK EnergyTechnology List. Please check the ECAscheme website: www.eca.gov.uk at time ofpurchase for current listing.

2104E Issue 2.2eWP premium efficiency motorsStandards and environmentStandardsStandardsMotors of cast iron construction can be manufactured to the international standards listed below:RangeInternationalNational standardNorth American*StandardIECBSVDEDINNFNEMAOutputs–BS 5000 part 10–DIN 42673, DIN 42677NF C51-110MG1 part 10PerformanceIEC 60034-1BS EN 60034-1VDE 0530 part 1–NF C51-111MG1 part 12DimensionsIEC 60072-1BS 4999 part 141–DIN 42673, DIN 42677NF C51-105, NF C51-120MG1 part 4MountingIEC 60034-7BS EN 60034-7–DIN 42950NF C51-117MG1 part 4Degrees of protectionIEC 60034-5BS EN 60034-5–DIN 40050NF C51-115MG1-1.26Bstandard BS and European specification motor compliesoptionalBS specification motor complies except flange tolerances to IEC 60072-1 Annex C.1.7 Option 1European specification motorsMotors complying with IEC 60034-1 also comply with many of the national standards of other European countries, eg CEI 203 (Italy), NBN7 (Belgium), NEN3173 (Netherlands), SEN 2601 01 (Sweden)*Motors to NEMA standards have CSA approval and generally comply with Canadian (EEMAC) standardsMotors can be supplied to CSA standard C390 (energy efficient) and USA ‘EPAct’ legislationMotors certified by Underwriters Laboratories Inc (UL) can be supplied on request. The UL mark and certification number will be on each rating plate toshow product compliance and certification.EnvironmentEnclosureAll motors have degrees of IP protectionas defined in IEC 60034-5 (BS EN 60034 part 5).European directivesThree European directives apply invarying degrees to ac induction motors.Brook Crompton comply in the followingmanner:Motor coolingMotors are cooled in accordance withBS EN 60034-6. The normal arrangementis IC411 (Totally Enclosed Fan Ventilated) viaa fan mounted at the non-drive end.Alternative methods of cooling available onrequest.Compliance with European directives applying to AC induction motorsDirectivesLow voltage(LV)Machinery(MD)Electromagnetic compatibility(EMC)Reference numbersMotor CE markedStandardsDocumentation for customers’ technical fileSafety instructions with every motorComment73/23/EEC93/68/EECYesEN 60034Declaration of conformityYesRelevant electricalequipment operatingbetween50 to 1000 volts AC89/392/EEC91/368/EEC93/44/EEC93/68/EECNoNot applicableCertificate of incorporationYesStatement (2)89/336/EEC92/31/EEC93/68/EECNoEN 60034-1Statement (1)YesComponent(1) Motors operating from a correctly applied, sinusoidal (AC) supply meet the requirements of the EMC directive and are within the limits specified in standardEN 60034-1(2) When installed in accordance with our customer safety and installation and maintenance instructions, they can be put into service only when the machinery intowhich they are being incorporated, has been declared to be in conformity with the machinery directive in accordance with Article 4(2) and Annex IIB of that Directive(98/37/EEC)3

2104E Issue 2.2eWP premium efficiency motorsPerformance data3000 min –1 (2 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp)0.75(1)1.1(1.5)1.5(2)2.2(3)3(4)4(5.5)5.5(7.57.5(10)11(15)15(20)18.5(2522(30)30(40)37(50)45(60)55(75)nmin –12850287528502860288028702910290029352935294029502940294029552955TypeWP-DF80ME (1)WP-DF80MM (1)WP-DF90LMX (1)WP-DF90LSX (1)WP-DF100LMF (1)WP-DF112MMX (1)WP-DF132SEX (1)WP-DF132SJX (1)WP-DF160MB (1)WP-DF160MJ (1)WP-DF160LR (1)WP-DF180ME (1)WP-UDF200LGX (2)WP-DF200LGX (3)WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF225MN (2)WP-DF225MN (3)WP-UDF250MNE (2)WP-DF250SN (3)380 VA1.772.413.04.55.87.610.614.020.727.7343955678199I N400 VA1.692.282.864.35.57.210.113.319.726.3323752647794415 VA1.692.282.864.35.57.210.113.319.726.3323751627490η1.0 P N0.75 P N0.5 P NCos Ø1.0 P N0.75 P N0.5 P NM NNm77.0 0.83{ }77.0 0.7773.0 0.6582.8 0.8483.7 0.78{ }81.3 0.6484.1 0.90{85.8 0.87}85.7 0.7985.6 0.87{86.4 0.83}86.2 0.7486.7 0.90{87.6 0.88}87.4 0.8487.6 0.91{88.6 0.89}88.5 0.8588.6 0.89{88.7 0.86}87.4 0.7389.5 0.91{90.6 0.89}90.7 0.8290.5 0.89{90.8 0.86}89.7 0.7991.3 0.90{91.5 0.88}91.2 0.8091.8 0.91{92.1 0.89}91.3 0.8192.2 0.92{92.2 0.90}91.0 0.8492.9 0.89{93.0 0.86}92.0 0.8093.3 0.89{93.4 0.86}92.5 0.8093.7 0.90{93.7 0.88}92.5 0.8394.0 0.90{94.2 0.88}93.00.832.53.75.07.39.913.318.024.735.848.860.271.497120145178M AM N2.22.72.72.73.03.02.72.52.22.22.42.22.72.72.32.3I AI N5.57.37.07.18.28.08.38.37.88.08.79.07.87.87.87.8M KM SM NM N2.02.52.73.13.03.33.13.13.03.03.13.23.12.92.92.82.82.42.42.52.62.82.42.31.81.91.91.92.32.31.91.9M AM NY–––––0.850.800.750.650.650.780.650.750.750.650.65I AI NY–––––2.82.42.52.52.62.72.82.52.52.52.5M SM NY–––––0.800.750.700.600.600.650.600.600.600.500.50Jkgm 20.00140.00120.00140.00160.00550.00550.0120.0150.0390.0450.0560.0940.150.180.470.56L PAdB(A)64646464606066666868686873737575(1) European and BS frame reference(2) European frame reference(3) BS frame reference4For tolerance details and notes - see page 22

2104E Issue 2.2eWP premium efficiency motorsPerformance data3000 min –1 (2 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp).75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)355(475)400(535)nmin –129602960297829782980298029802978298229822982298229822985TypeWP-UDF280SNE (2)WP-DF250MN (3)WP-UDF280MNE (2)WP-DF280SN (3)WP-UDF315SNE (2)WP-DF280MN (3)WP-UDF315MNE (2)WP-DF315SN (3)WP-UDF315MN (2)WP-DF315MN (3)WP-UDF315MP (2)WP-DF315MP (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF355SG (2)WP-DF355SG (3)WP-UDF355SJ (2)WP-DF355SJ (3)WP-UDF355SN (1)WP-DF355SN (3)WP-UDF355MJ (2)WP-DF355MJ (3)WP-UDF355MN (2)WP-DF355MN (3)WP-UDF355LN (2)WP-DF355LN (3)380 VA134160194233260277320346398445496551621691I N400 VA127152184221247264304329379421471524590657415 VA123146177213238254294317364405454505569633η1.0 P N0.75 P N0.5 P NCos Ø1.0 P N0.75 P N0.5 P NM NNm94.6 0.9094.9 0.88 242{ }93.4 0.8395.0 0.90{95.0 0.88}93.5 0.8395.8 0.90{95.4 0.88}94.0 0.8395.8 0.90{95.4 0.88}94.0 0.8396.2 0.91{95.8 0.89}94.3 0.8596.3 0.91{95.9 0.89}94.4 0.8596.4 0.91{96.2 0.89}94.8 0.8596.4 0.91{96.2 0.89}94.8 0.8596.4 0.89{95.9 0.87}94.6 0.8596.4 0.89{96.0 0.87}94.8 0.8596.4 0.89{96.1 0.87}94.9 0.8596.5 0.90{96.2 0.89}95.2 0.8696.5 0.90{96.3 0.89}95.4 0.8696.6 0.91{96.4 0.90}95.60.87290353423481513593641721801897100911371280M AM N2.22.22.22.22.02.02.01.852.02.02.02.02.02.0I AI N7.87.87.87.87.87.87.87.27.57.57.57.57.57.5M KM SM NM N2.03.03.02.92.92.752.752.752.52.72.72.72.72.72.72.01.81.81.71.71.71.61.61.61.61.61.61.6M AM NY0.650.650.650.650.600.600.600.550.650.650.650.650.650.65I AI NY2.52.52.52.52.52.52.52.32.32.32.32.32.32.3M SM NY0.500.500.450.450.450.450.450.420.450.450.450.450.450.45Jkgm 20.70.81.41.72.42.62.82.85.05.35.96.37.08.0L PAdB(A)7777787880808080808080808080(1) European and BS frame reference(2) European frame reference(3) BS frame referenceFor tolerance details and notes - see page 225

2104E Issue 2.2eWP premium efficiency motorsPerformance data1500 min –1 (4 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp)0.55(0.75)0.75(1)1.1(1.5)1.5(2)2.2(3)3(4)4(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)37(50)45(60)55(75)nmin –1Type1410 WP-DF80ME (1)1410 WP-DF80MG (1)1435 WP-DF90LRX (1)1435 WP-DF90LWX (1)1440 WP-DF100LRF (1)1445 WP-DF100LTF (1)1445 WP-DF112MWX (1)1450 WP-DF132STX (1)1460 WP-DF132MVX (1)1470 WP-DF160MJ (1)1470 WP-DF160LR (1)1470 WP-DF180ME (1)1470 WP-DF180LJ (1)1470147014751475WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF225SN (2)WP-DF225SN (3)WP-UDF225MN (2)WP-DF225MN (3)WP-UDF250MNE (2)WP-DF250SN (3)380 VA1.661.972.553.54.86.38.311.115.22229.53643577084103I N400 VA1.581.882.433.34.56.07.910.614.52128.1344154668098415 VA1.581.882.433.34.56.07.910.614.52128.1344152647794η1.0 P N0.75 P N0.5 P NCos Ø1.0 P N0.75 P N0.5 P NM NNm75.0 0.6775.0 0.57 3.770.0 0.4578.0 0.7479.0 0.65 5.177.0 0.5083.8 0.7884.7 0.71 7.383.9 0.6085.0 0.7785.6 0.69 1084.7 0.5786.4 0.8187.1 0.75 14.686.2 0.6487.4 0.8287.8 0.77 19.887.8 0.6888.3 0.8389.3 0.78 26.490.5 0.7189.2 0.8489.6 0.79 36.289.3 0.7090.1 0.8390.3 0.77 49.189.5 0.6591.0 0.8391.2 0.79 71.590.5 0.6791.8 0.8492.3 0.79 97.591.7 0.6892.2 0.8492.3 0.79 12091.3 0.6492.6 0.8492.9 0.80 14392.5 0.6993.2 0.8693.2 0.84 19592.3 0.7593.6 0.8693.6 0.84 24092.5 0.7593.9 0.8694.2 0.84 29293.0 0.7594.2 0.8694.6 0.84 35793.5 0.75{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }M AM N2.01.82.62.92.83.12.62.72.92.52.52.82.52.32.32.72.7I AI N4.24.46.47.07.67.57.37.88.17.77.78.47.57.57.37.77.7M KM SM NM N1.82.42.22.93.13.13.23.03.03.22.92.93.22.93.23.23.23.21.62.32.42.62.82.22.32.52.02.02.22.01.91.91.91.9M AM NY––––––0.700.700.700.650.650.800.750.70.70.750.75I AI NY––––––2.22.22.22.32.32.62.22.42.32.52.5M SM NY––––––0.600.600.600.500.500.650.600.550.550.550.55Jkgm 20.00150.00190.00340.00420.01030.01180.0150.0300.0330.0680.0840.160.190.310.450.650.75L PAdB(A)4747484854545659596363626265666767(1) European and BS frame reference(2) European frame reference(3) BS frame reference6For tolerance details and notes - see page 22

2104E Issue 2.2eWP premium efficiency motorsPerformance data1500 min –1 (4 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp).75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)355(475)400(535)nmin –114751475148014821485148714871485148714871487148714871487TypeWP-UDF280SNE (2)WP-DF250MN (3)WP-UDF280MNE (2)WP-DF280SN (3)WP-UDF315SNE (2)WP-DF280MN (3)WP-UDF315MNE (2)WP-DF315SN (3)WP-UDF315MN (2)WP-DF315MN (3)WP-UDF315MP (2)WP-DF315MP (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF315LN (2)WP-DF315LN (3)WP-UDF355SG (2)WP-DF355SG (3)WP-UDF355SJ (2)WP-DF355SJ (3)WP-UDF355SN (2)WP-DF355SN (3)WP-UDF355MJ (2)WP-DF355MJ (3)WP-UDF355MN (2)WP-DF355MN (3)WP-UDF355LN (2)WP-DF355LN (3)380 VA138165201241270288333360398442494556619697I N400 VA131157191229257274316342379420470528588662415 VA126151184220247264305329365405453509567638η1.0 P N0.75 P N0.5 P NCos Ø1.0 P N0.75 P N0.5 P NM NNm94.7 0.8794.8 0.85 48693.5 0.7595.0 0.8795.1 0.85 58393.8 0.7595.6 0.8795.5 0.85 71094.0 0.7795.8 0.8795.6 0.85 85294.2 0.7795.9 0.8895.7 0.86 96594.7 0.7895.9 0.8895.7 0.86 102994.7 0.7896.0 0.8895.8 0.86 119095.0 0.7896.0 0.8895.8 0.86 128695.0 0.7896.4 0.8996.2 0.86 144595.4 0.8096.6 0.8996.4 0.86 160595.6 0.8096.7 0.8996.5 0.87 179895.8 0.8196.8 0.8996.7 0.88 202396.0 0.8396.8 0.9096.7 0.89 228096.3 0.8496.9 0.9096.8 0.89 256996.5 0.84{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }{ }M AM N2.42.52.42.42.42.42.42.32.12.12.12.12.12.1I AI N7.47.47.77.77.87.87.87.67.27.27.27.27.27.2M KM SM NM N1.92.72.82.62.62.72.72.72.62.52.52.52.52.52.52.02.02.02.02.02.01.91.71.71.71.71.71.7M AM NY0.720.750.700.700.700.700.700.650.650.650.650.650.650.65I AI NY2.32.42.52.52.52.52.52.42.22.22.22.22.22.2M SM NY0.540.550.50.50.50.50.50.450.50.50.50.50.50.5Jkgm 21.41.63.23.74.44.75.55.58.29.510.611.913.214.6L PAdB(A)6969717173737373767676797979(1) European and BS frame reference(2) European frame reference(3) BS frame referenceFor tolerance details and notes - see page 227

2104E Issue 2.2eWP premium efficiency motorsPerformance data1000 min –1 (6 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp)0.37(0.5)0.55(0.75)0.75(1)1.1(1.5)1.5(2)2.2(3)3(4)4(5.5)5.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)37(50)45(60)nmin –1920920920940930950965960960975975975975975980980985TypeWP-DF80MG (1)WP-DF80MM (1)WP-DF90SG (1)WP-DF90LT (1)WP-DF100LR (1)WP-DF112MS (1)WP-DF132SG (1)WP-DF132ML (1)WP-DF132MM (1)WP-DF160MM (1)WP-DF160LV (1)WP-DF180LM (1)WP-UDF200LGX (2)WP-DF200LGX (3)WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF225MN (2)WP-DF225MN (3)WP-UDF250MNE (2)WP-DF250SN (3)WP-UDF280SNE (2)WP-DF250MN (3)380 VA1.331.862.233.44.55.87.59.512.916.823.8333946617488I N400 VA1.271.772.123.24.35.57.1912.31622.7313743587084415 VA1.271.772.123.24.35.57.1912.31622.7313542566781η1.0 P N0.75 P N0.5 P NCos Ø1.0 P N0.75 P N0.5 P NM NNm69.0 0.6168.0 0.51 3.8{ }64.0 0.4071.0 0.63{71.0 0.54}68.0 0.4174.0 0.69{74.0 0.59}72.0 0.4578.0 0.63{77.0 0.52}75.0 0.4179.0 0.64{79.0 0.54}77.0 0.4282.5 0.70{82.5 0.60}80.5 0.4786.0 0.71{86.0 0.64}84.0 0.5286.5 0.74{86.5 0.67}86.0 0.5587.0 0.74{87.0 0.67}86.5 0.5490.0 0.75{90.5 0.70}89.0 0.6091.0 0.77{91.0 0.72}89.5 0.6091.0 0.78{91.0 0.73}89.5 0.6091.2 0.80{91.2 0.76}90.0 0.6791.7 0.80{91.7 0.76}90.5 0.6792.7 0.80{92.7 0.76}91.7 0.6793.2 0.82{93.2 0.78}92.0 0.6993.4 0.8393.3{0.79}92.30.715.77.811.215.422.129.839.854.773.4108147181215292361436M AM N2.02.02.22.82.02.82.22.12.01.82.02.42.32.32.72.72.5I AI N3.73.74.14.54.25.86.56.25.56.57.56.57.07.06.06.06.0M KM SM NM N1.82.22.32.43.02.32.82.72.62.52.82.82.82.02.02.12.12.01.82.02.52.02.31.71.61.61.71.92.22.82.81.81.81.8M AM NY------0.650.600.600.550.600.650.650.650.800.800.75I AI NY––––––2.12.02.02.12.52.22.32.32.02.01.9M SM NY––––––0.550.500.500.50.500.600.500.500.450.450.40Jkgm 20.00150.00210.00280.00390.0090.0140.0230.0270.0290.100.120.230.420.481.231.472.55L PAdB(A)4949656558545858585959596262636365(1) European and BS frame reference(2) European frame reference(3) BS frame reference8 For tolerance details and notes - see page 22

2104E Issue 2.2eWP premium efficiency motorsPerformance data1000 min –1 (6 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp).55(75)75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300)250(335)280(375)315(420)nmin –1985985985985985985985985985985985990990Type380 VAI N400 VA415 VAη1.0 P N0.75 P N0.5 P NCos Ø1.0 P N0.75 P N0.5 P NM NNm{ }WP-UDF280MNE (2)93.8 0.83107 102 98WP-DF280SN (3)93.6 0.79 533 2.5 6.1 2.0 0.75 1.85 0.40 2.992.6 0.71WP-UDF315SNE (2)94.3 0.84144 137 132WP-DF280MN (3)94.1 0.80 727 3.0 7.0 2.6 2.1 0.90 2.1 0.60 5.0{ }93.0 0.72WP-UDF315MNE (2)94.5 0.84172 164 1586.0WP-DF315SN (3)94.3 0.80 872 3.0 7.0 2.6 2.1 0.90 2.1 0.60{ }93.4 0.72WP-UDF315MN (2)94.8 0.85207 197 1906.1WP-DF315MN (3)94.7 0.81 1066 2.8 6.7 2.0 1.9 0.80 2.1 0.55{ }93.8 0.73WP-UDF315LN (2)95.0 0.85248 236 2277.3WP-DF315LN (3)94.9 0.81 1280 2.8 6.7 2.0 1.9 0.80 2.1 0.55{ }94.1 0.73WP-UDF355SG (2)95.5 0.85281 267 25710WP-DF355SG (3)95.4 0.83 1454 1.7 7.0 2.1 1.4 0.50 2.2 0.35{ }94.5 0.76WP-UDF355SG (2)95.9 0.85298 283 27310WP-DF355SG (3)95.7 0.83 1551 1.7 6.7 2.1 1.4 0.50 2.0 0.35{ }94.9 0.76WP-UDF355SJ (2)95.9 0.85345 328 31611.1WP-DF355SJ (3)95.8 0.83 1793 1.7 6.7 2.1 1.4 0.45 2.1 0.35{ }95.1 0.76WP-UDF355SN (2)96.0 0.85372 354 34112.2WP-DF355SN (3)95.9 0.83 1939 1.7 6.7 2.1 1.4 0.45 2.1 0.35{ }95.2 0.76WP-UDF355MJ (2)96.0 0.85419 398 38413.6WP-DF355MJ (3)96.0 0.83 2181 1.7 6.7 2.1 1.4 0.45 2.1 0.35{ }95.4 0.76WP-UDF355MN (2)96.1 0.85465 442 42615.2WP-DF355MN (3)96.1 0.83 2424 1.8 7.0 2.2 1.5 0.48 2.2 0.40{ }95.6 0.76WP-UDF355LJ (2)96.2 0.85520 494 47616.9WP-DF355LJ (3)96.2 0.83 2701 1.8 7.0 2.2 1.5 0.48 2.2 0.40{ }95.7 0.76WP-UDF355LN (2)96.3 0.85585 555 53518.6WP-DF355LN (3) 96.3 0.83 3038 1.8 7.0 2.1 1.5 0.48 2.1 0.40{ }95.9 0.76M AM NI AI NM KM SM NM N1.9M AM NYI AI NYM SM NYJkgm 2L PAdB(A)65686870707474747477777777(1) European and BS frame reference(2) European frame reference(3) BS frame referenceFor tolerance details and notes - see page 229

2104E Issue 2.2eWP premium efficiency motorsPerformance data750 min –1 (8 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp)0.18(0.25)0.25(0.33)0.37(0.5)0.55(0.75)0.75(1)1.1(1.5)1.5(2)2.2(3)3(4)4(5.55.5(7.5)7.5(10)11(15)15(20)18.5(25)22(30)30(40)nmin –1695695700680690690690720720725725725730730730730735TypeWP-DF80MG (1)WP-DF80MM (1)WP-DF90SG (1)WP-DF90LM (1)WP-DF100LR (1)WP-DF100LS (1)WP-DF112MS (1)WP-DF132SM (1)WP-DF132MR (1)WP-DF160ME (1)WP-DF160MM (1)WP-DF160LV (1)WP-DF180LM (1)WP-UDF200LNX (2)WP-DF200LNX (3)WP-UDF225SN (2)WP-DF225SN (3)WP-UDF225MN (2)WP-DF225MN (3)WP-UDF250MNE (2)WP-DF250SN (3)380 VA1.011.261.712.42.773.94.66.28.210.413.918.227.635435067I N400 VA0.961.21.632.32.643.74.45.97.89.913.217.326.333404764415 VA0.961.21.632.32.643.74.45.97.89.913.217.326.332394561η1.0 P N0.75 P N0.5 P NCos Ø1.0 P N0.75 P N0.5 P NM NNm55.0 0.4952.0 0.42 2.5{ }44.0 0.3459.0 0.51{56.5 0.43}49.0 0.3462.0 0.53{59.0 0.44}51.0 0.3464.0 0.54{62.0 0.44}55.0 0.3369.5 0.59{68.0 0.49}61.0 0.4071.5 0.60{70.5 0.51}68.0 0.3974.5 0.66{74.0 0.56}71.0 0.4482.5 0.65{83.0 0.57}80.0 0.4584.0 0.66{84.0 0.58}82.0 0.4586.0 0.68{86.0 0.64}84.0 0.5187.0 0.69{87.0 0.65}85.5 0.5288.0 0.71{88.0 0.65}86.0 0.5290.0 0.67{90.0 0.59}88.0 0.4890.0 0.73{90.0 0.66}88.5 0.5490.5 0.73{90.5 0.66}89.5 0.5491.5 0.74{91.5 0.66}89.0 0.5492.0 0.74{92.0 0.67}90.00.553.55.17.610.415.220.729.239.852.772.498.8143.9196242288390M AM N2.22.22.32.31.81.81.91.61.61.61.61.62.01.82.02.01.7I AI N2.72.93.03.33.23.24.05.05.05.55.76.04.55.85.56.06.0M KM SM NM N2.02.52.52.52.72.12.12.02.42.42.52.52.52.52.62.252.42.42.02.12.11.71.71.71.51.41.41.41.41.71.61.61.61.6M AM NY---------0.50.50.50.630.450.50.450.4I AI NY––––––---1.71.71.81.41.71.61.71.7M SM NY–––––----0.450.450.450.550.350.350.350.35Jkgm 20.00170.00210.00280.00350.0090.00950.0150.0290.0310.090.110.140.240.480.751.231.47L PAdB(A)4646505053535757575353535860606262(1) European and BS frame reference(2) European frame reference(3) BS frame reference10 For tolerance details and notes - see page 22

2104E Issue 2.2eWP premium efficiency motorsPerformance data750 min –1 (8 pole)Rated powerFull load speed inrevolutions per minuteFrame referenceand sizeFull load current atrated voltageEfficiencyPower factorFull load torqueDirect on linestarting torque ratioDirect on linestarting current ratioDirect on linepull out torque ratioDirect on linepull up torqueStar deltastarting torque ratio (1)Star deltastarting current ratioStar deltapull up torqueRotor inertia WK 2Mean sound pressure level@ 1m on no loadP NkW(hp)37(50)45(60)55(75)75(100)90(125)110(150)132(175)150(200)160(215)185(250)200(270)225(300nmin –1735735740740740740740740740740740740Type380 VAI N400 VA415 VAη Cos Ø1.0 P N 1.0 P NM N0.75 P N 0.75 P NNm0.5 P N 0.5 P N{ }92.5 0.75WP-UDF280SNE (2)81 77 74WP-DF250MN 92.5 0.68 481 1.7 6.0 2.4 0.40 1.7 0.35 2.55(3)91.5 0.5693.0 0.75WP-UDF280MNE (2)98 93 90WP-DF280SN { }92.8 0.69 585 1.7 6.0 2.4 1.4 0.40 1.7 0.3 2.9(3)91.6 0.5793.5 0.75WP-UDF315SNE (2)119 113 1095.0WP-DF280MN { }93.3 0.70 710 2.5 6.0 2.0 1.5 0.60 1.7 0.35(3)92.0 0.5894.1 0.76WP-UDF315MNE (2)159 151 1466.0WP-DF315SN { }93.9 0.72 968 2.5 6.0 2.0 1.5 0.60 1.7 0.35(3)92.2 0.6094.4 0.77WP-UDF315MN (2)188 179 1726.1WP-DF315MN { }94.2 0.73 1161 2.4 6.0 2.0 1.8 0.65 1.7 0.45(3)93.4 0.6494.6 0.77WP-UDF315LN (2)227 218 2107.3WP-DF315LN { }94.4 0.73 1419 2.4 6.0 2.0 1.8 0.65 1.7 0.45(3)93.6 0.6495.1 0.77WP-UDF355SJ (2)274 260 25112.2WP-DF355SJ { }94.8 0.73 1703 1.6 6.1 2.0 1.3 0.40 1.8 0.3(3)93.6 0.6495.5 0.77WP-UDF355SN (2)310 295 28413.6WP-DF355SN { }95.3 0.73 1936 1.6 6.1 2.0 1.3 0.40 1.8 0.3(3)94.0 0.6495.5 0.77WP-UDF355SN (2)331 315 30313.6WP-DF355SN { }95.3 0.73 2065 1.6 6.1 2.0 1.3 0.40 1.8 0.3(3)94.0 0.6495.6 0.77WP-UDF355MJ (2)383 364 35015.2WP-DF355MJ { }95.4 0.73 2387 1.6 6.1 2.0 1.3 0.40 1.8 0.3(3)94.1 0.6495.6 0.77WP-UDF355MN (2)413 393 37816.9WP-DF355MN { }95.4 0.73 2581 1.6 6.1 2.0 1.3 0.40 1.8 0.3(3)94.3 0.6495.6 0.77WP-UDF355LN (2)464 441 42518.6WP-DF355LN { }95.4 0.73 2903 1.6 6.1 2.0 1.3 0.40 1.8 0.3(3)94.7 0.64M AM NI AI NM KM SM NM N1.6M AM NYI AI NYM SM NYJkgm 2L PAdB(A)636364646565727272747474(1) European and BS frame reference(2) European frame reference(3) BS frame referenceFor tolerance details and notes - see page 2211

2104E Issue 2.2eWP premium efficiency motorsDimensions- European & BS specificationsFoot, flange and face mounting - frames 80 - 180LLACEBEDTBWTBHKKIM B3IM 1001HD 1 HDMounting optionsKHHAECB CRSAAAABBA CRSABLLAHOLES SON M PCDIM B5/IM B35IM 3001/IM 2001Mounting optionsPN45°TLLAHOLES SON M PCDIM B14/IM B34IM 3601/IM 2101Mounting optionsPN45°T12

2104E Issue 2.2eWP premium efficiency motorsFoot, flange and face mounting - frames 80 - 180LTypePolesGeneralA BCHKLAAABACBBHAHDHD1Terminal boxTBW TBHKKWP-DF80MWP-DF90SWP-DF90LWP-DF100LWP-DF112MWP-DF132SWP-DF132MWP-DF160MWP-DF160LWP-DF180MWP-DF180LAll6 up2 & 46 up2 & 46 up2 & 46 up2 & 46 up2 & 46 upAllAllAllAll1251401401401601601901902162162162162542542792791001001251251401401401401401401781782102542412795056565663637070898989891081081211218090909010010011211213213213213216016018018010101010121212121212121215151515278322364322409368442382484.5447484.54476046046636633538383834344540474747475555646415717517517519519523023025525525525530030034434415817517417521419922222025626025626031531535535512715519515520616524218222022022022030030032632610121212141416161617161722222222236-254-283274305305348348348348428428469469195-273-242234257258.53003083003083683684104101201201201201201201351351351351351351741741741741201201201201201201351351351351351351741741741741 X 201 X 201 X 201 X 202 X 202 X 202 X 252 X 252 X 252 X 252 X 252 X 252 X 322 X 322 X 322 X 32TypeIM B5 mountingM N PSTLAIM B14 mountingM N PSTLAWP-DF80MWP-DF90S/LWP-DF100LWP-DF112MWP-DF132SWP-DF132MWP-DF160MWP-DF160LWP-DF180MWP-DF180L165165215215265265300300300300130130180180230230250250250250200200250250300300350350350350121215151515191919193.53.54444555512121212121213131515100115130130165165215215--8095110110130130180180--120140160164200200250250--M6M8M8M8M10M10M12M12--333.53.53.53.544--9912.51314141313--TypeShaftD EFGGDEBEDDHGDWP-DF80MWP-DF90S/LWP-DF100LWP-DF112MWP-DF132SWP-DF132MWP-DF160MWP-DF160LWP-DF180MWP-DF180L19242828383842424848405060608080110110110110688810101212141415.52024243333373742.542.567778888993240505070701001001001004555555555M6 x 16M8 x 19M10 x 22M10 x 22M12 x 28M12 x 28M16 x 36M16 x 36M16 x 36M16 x 36DGFTAPPED HOLE DHTO DIN 332For tolerance details and notes - see page 2213

2104E Issue 2.2eWP premium efficiency motorsDimensions - European specificationFoot and flange mounting - frames 200 - 355LLACEBEDTBWTBHKKIM B3IM 1001HD 1 HDMounting optionsKHHAECB CRSAAAABBA CRSABLLAHOLES SON M PCDIM B5/IM B35IM 3001/IM 2001Mounting optionsPN45°T14(1) 8 holes at 22.5° for flanges to suit 225 frames and above to European specification8 holes at 0° for flanges to suit 225 frames and above to British specification

2104E Issue 2.2eWP premium efficiency motorsFoot and flange mounting - frames 200 - 355LTypeGeneralA BCHKL4 pole +L2 poleAAABACBBHAHDHD 1TBWTerminal boxTBHKKWP-UDF200LXWP-UDF225SWP-UDF225MWP-UDF250MEWP-UDF280SEWP-UDF280MEWP-UDF315SEWP-UDF315MEWP-UDF315MWP-UDF315LWP-UDF355SWP-UDF355MWP-UDF355L318356356406457457508508508508610610610305286311349368419406457457508500560630133149149168190190216216216216254254254200225225250280280315315315315355355355M16M16M16M20M20M20M24M24M24M24M24M24M247878759159851065107011451215124513151485160516557878458859851065107011151185121512851415153515857470707983838989898910010010038242642648254054059759759759771071071038141044844850850856356364064073273273235934937441943848948253353358362668675630252528353538383838272727501550 (1)570595 (2)655 (1)655 (1)8458458758759759759754444885105355955957447447767768748748741762202202202202203303303303303303303302202882882882882885265265265265265265262 x M32 + 1 x M202 x M40 + 1 x M202 x M40 + 1 x M202 x M50 + 1 x M202 x M50 + 1 x M202 x M50 + 1 x M202 x M63 + 1 x M202 x M63 + 1 x M202 x M63 + 1 x M202 x M63 + 1 x M202 x M63 + 1 x M202 x M63 + 1 x M202 x M63 + 1 x M204 pole +2 poleTypeShaftDEFGGDEBEDDHDEFGGDEBEDDHWP-UDF200LXWP-UDF225SWP-UDF225MWP-UDF250MEWP-UDF280SEWP-UDF280MEWP-UDF315SEWP-UDF315MEWP-UDF315MWP-UDF315LWP-UDF355SWP-UDF355MWP-UDF355L55606065757580808080100100100110140140140140140170170170170210210210161818182020222222222828284953535867.567.57171717190909010111111121214141414161616100125125125125125160160160160200200200510101010105555555M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M24 x 50M24 x 50M24 x 5055555560656565656565757575110110110140140140140140140140140140140161616181818181818182020204949495353585858585867.567.567.51010101111111111111112121210010010012512512512512512512512512512555510101010101010101010M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M24 x 50M24 x 50M24 x 50TypeWP-UDF200LXWP-UDF225SWP-UDF225MWP-UDF250MEWP-UDF280SEWP-UDF280MEWP-UDF315SEWP-UDF315MEWP-UDF315MWP-UDF315LWP-UDF355SWP-UDF355MWP-UDF355LIM B5, IM B35 mountingM350400400500500500600600600600740740740N300350350450450450550550550550680680680P400450450550550550660660660660800800800S19191919191924242424242424T5555556666666LA19191925252529292929282828DGGDFTAPPED HOLE DHTO DIN 332(1) add 25mm when cable entry is facing drive end(2) add 50mm when cable entry is facing drive endFor tolerance details and notes - see page 2215

2104E Issue 2.2eWP premium efficiency motorsDimensions - BS specificationFoot and flange mounting - frames 200 - 355LLACEBEDTBWTBHKKIM B3IM 1001HD 1 HDMounting optionsKHHAECB CRSAAAABBA CRSABLLAHOLES SON M PCDIM B5/IM B35IM 3001/IM 2001Mounting optionsPN45°T16(1) 8 holes at 22.5° for flanges to suit 225 frames and above to European specification8 holes at 0° for flanges to suit 225 frames and above to British specification

2104E Issue 2.2eWP premium efficiency motorsFoot and flange mounting - frames 200 - 355LTypeGeneralABCHKL4 pole +L2 poleAAABACBBHAHDTerminal boxTBW TBHWP-DF200LXWP-DF225SWP-DF225MWP-DF250SWP-DF250MWP-DF280SWP-DF280MWP-DF315SWP-DF315MWP-DF315LWP-DF355SWP-DF355MWP-DF355L318356356406406457457508508508610610610305286311311349368419406457508500560630133149149168168190190216216216254254254200225225250250280280315315315355355355M16M16M16M20M20M20M20M24M24M24M24M24M247878759159851030110011451215124513151485160516557878458859851030107011151185121512851415153515857470707979838389898910010010038242642648248254054059759759771071071038141044844850850856356364064073273273235934937438141943848748353358362668675630252528283535383838272727501550 (1)570595 (2)625 (1)655 (1)8108458758759709709701762202202202202203303303303303303303302202882882882882885265265265265265265264 pole + 2 poleTypeShaftDEFGGDEBEDDHDEFGGDEBEDDHWP-DF200LXWP-DF225SWP-DF225MWP-DF250SWP-DF250MWP-DF280SWP-DF280MWP-DF315SWP-DF315MWP-DF315LWP-DF355SWP-DF355MWP-DF355L556060707080808585851001001001101401401401401701701701701702102102101618182020222222222228282849535362.562.571717676769090901011111212141414141416161610012512512512516016016016016020020020051010101055555555M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M24 x 50M24 x 50M24 x 5055555560606565656565757575110110110140140140140140140140140140140161616181818181818182020204949495353585858585867.567.567.51010101111111111111112121210010010012512512512512512512512512512555510101010101010101010M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M20 x 42M24 x 50M24 x 50M24 x 50TypeIM B5, IM B35 mountingM N P STLAWP-DF200LXWP-DF225SWP-DF225MWP-DF250SWP-DF250MWP-DF280SWP-DF280MWP-DF315SWP-DF315MWP-DF315LWP-DF355SWP-DF355MWP-DF355L35040040050050050050060060060074074074030035035045045045045055055055068068068040045045055055055055066066066080080080019191919191919242424242424555555566666619191925252525292929282828DGGDFTAPPED HOLE DHTO DIN 332(1) add 25mm when cable entry is facing drive end(2) add 50mm when cable entry is facing drive endFor tolerance details and notes - see page 2217

2104E Issue 2.2eWP premium efficiency motorsMounting optionsHorizontal shaft:IM B3IM 1001foot mountedIM B5IM 3001flange at DEno feetIM B6IM 1051foot wall mounted withfeet on left-hand sidewhen viewed from DEIM B7IM 1061foot wall mounted withfeet on right-hand sidewhen viewed from DEIM B8IM 1071ceiling mountedwith feetabove motorIM B14IM 3601face at DEno feetVertical shaft:IM V1IM 3011flange at DEshaft downno feetIM V3IM 3031flange at DEshaft upno feetIM V5IM 1011vertical footwall mountedshaft downIM V6IM 1031vertical footwall mountedshaft upIM V18IM 3611face at DEshaft downno feetIM V19IM 3631face at DEshaft downno feetApproximate shipping specificationsTypeEuropeanBSWP-DF80M WP-DF80MWP-DF90S/L WP-DF90LWP-DF100L WP-DF100LWP-DF112M WP-DF112MWP-DF132S WP-DF132SWP-DF132M WP-DF132MWP-DF160M WP-DF160MWP-DF160L WP-DF160LWP-DF180M WP-DF180MWP-DF180L WP-DF180LWP-UDF200LX WP-DF200LXWP-UDF225S WP-DF225SWP-UDF225M WP-DF225MWP-UDF250ME WP-DF250SWP-UDF280SE WP-DF250MWP-UDF280ME WP-DF280SWP-UDF315SE WP-DF280MWP-UDF315ME WP-DF315SWP-UDF315M WP-DF315MWP-UDF315L WP-DF315LWP-UDF355S WP-DF355SWP-UDF355M WP-DF355MWP-UDF355L WP-DF355LNet weight (kg) Gross weight (kg) Cubage (m 3 )1530.541.855.278.182.6121133162177.525532037542057066080010001100130020002300250016.531.544.358.281.1*88.6133145178193.52703353904606107218711095119513952120242026200.020.020.040.060.080.080.150.150.210.210.300.370.370.630.701.21.21.81.81.82.32.32.318

2104E Issue 2.2eWP premium efficiency motorsTechnical information:MechanicalBearings and greasingarrangementsBearings are pre-packed with a grease typedependant on frame size and re-greasingfacility as detailed in table opposite:Standard and re-greasing facilitiesType80 - 180200 - 355StandardgreaseEA6 PolyureaEsso Unirex N3Re-greasingfacilityAvailableStandardBearing references and oil seals for horizontally-mounted motors onlyTypeBearings (1)Oil seals (2)EuropeanBSPolarityDrive endNon-drive endDrive endNon-drive endWP-DF80MWP-DF90S/LWP-DF100LWP-DF112MWP-DF132S/MWP-DF160M/LWP-DF180M/LWP-UDF200LXWP-UDF225SWP-UDF225MWP-UDF250MEWP-UDF280SEWP-UDF280MEWP-UDF315SEWP-UDF315MEWP-UDF315MWP-UDF315LWP-UDF355S/M/LWP-DF80MWP-DF90S/LWP-DF100LWP-DF112MWP-DF132S/MWP-DF160M/LWP-DF180M/LWP-DF200LXWP-DF225SWP-DF225MWP-DF250SWP-DF250MWP-DF280SWP-DF280MWP-DF315SWP-DF315MWP-DF315LWP-DF355S/M/LAllAllAllAllAllAllAllAllAllAll24 up24 up24 up24 up24 up24 up24 up24 up62042Z62052Z62062Z62062Z62082Z63092Z63102Z63126313631463146316631463186314631863166319631663196316631963166319N316N32460032Z62032Z62052Z62052Z63052Z63072Z63082Z631263136314631463166314631863146318631663196316631963166319631663196316632420 x 30 x 7 (3)25 x 35 x 7 (3)30 x 42 x 7 (3)30 x 42 x 7 (3)40 x 52 x 7 (3)45 x 60 x 8 (3)50 x 65 x 8 (3)60 x 80 x 8 (3)65 x 90 x 10 (4)70 x 90 x 10 (4)70 x 90 x 10 (4)80 x 110 x 10 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)75 x 100 x 10 (4)115 x 145 x 14 (3)15 x 24 x 5 (3)17 x 28 x 6 (3)25 x 37 x 7 (3)25 x 37 x 7 (3)25 x 37 x 7 (3)35 x 47 x 7 (3)40 x 52 x 7 (3)60 x 80 x 8 (3)65 x 90 x 10 (4)70 x 90 x 10 (4)70 x 90 x 10 (4)80 x 110 x 10 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)70 x 90 x 10 (4)90 x 120 x 12 (3)75 x 100 x 10 (4)115 x 145 x 14 (3)(1) Frame sizes 80 and 90 have bearings with CN clearances, frame sizes 100 to 355 have bearings with C3 clearance ‘medium’ series(2) Sizes given are in mm, and represent bore x outside diameter x widthMaterial: (3) Nitrile rubber (4) Silicon rubberGrease life expected at 80ºC bearing temperature x 10 3 hoursType1500 min -1 1000 min -1 750 min -1EuropeanBS3000 min -1 Vertical HorizontalHorizontalVertical Horizontal Vertical Horizontal VerticalWP-DF80-112WP-DF132WP-DF160WP-DF180WP-UDF200LXWP-UDF225SWP-UDF225MWP-UDF250MEWP-UDF280SEWP-UDF280MEWP-UDF315SEWP-UDF315MEWP-UDF315MWP-UDF315LWP-UDF355S/M/L (1)WP-UDF355S/M/L (2)WP-DF80-112WP-DF132WP-DF160WP-DF180WP-DF200LXWP-DF225SWP-DF225MWP-DF250SWP-DF250MWP-DF280SWP-DF280MWP-DF315SWP-DF315MWP-DF315LWP-DF355S/M/L (1)WP-DF355S/M/L (2)30.030.029.024.012.612.611.311.311.311.39.49.49.49.45.09.430.025.019.016.08.28.27.47.47.47.46.16.16.16.13.36.130.030.030.030.030.030.029.526.323.423.421.321.321.321.38.213.530.030.030.030.020.320.319.217.115.215.213.813.813.813.85.38.830.030.030.030.030.030.030.030.030.030.030.030.030.030.016.222.530.030.030.030.027.827.826.023.621.321.320.320.320.320.310.514.630.030.030.030.030.030.030.030.030.030.030.030.030.030.024.530.030.030.030.030.030.030.030.029.327.827.826.026.026.026.015.919.5(1) DE = Drive End(2) NDE = Non-Drive End19

2104E Issue 2.2eWP premium efficiency motorsTechnical information:MechanicalAxial and radial loadsMaximum permissible external axial thrust and radial loads in Newtons (N)TypePolesLoadtowardsmotorHorizontal shaftLoadaway frommotorLoad towardsmotorShaft upLoad awayfrom motorVertical shaftLoad towardsmotorShaft downLoad awayfrom motorMaximumpermissible radial loadat end of shaft(standard mounting)WP-DF80MWP-DF90SWP-DF90LWP-DF100LWP-DF112MWP-DF132SWP-DF132MWP-DF160MWP-DF160LWP-DF180MWP-DF180L2468682468246824682468468246824682468912868754773854874107010058438701563146614121225155114521403121024812459239318782449237218742168215320221509214421231973146427112749257522667126685545736146348307656036301243114610929051231113210838902129210720411526209720201522266326482517200426392618246819593274331231382829746701594613660680870832667686131112731176994132012861203100922832330221717282339222717332932295929052389295029822946243536673830378534698978527347538288481041957807839152213871359116714971356132711332386232122841745230122441734200219601777125019511895166911442465242621661850946901794813900920111010729079261631159314961314164016061523132926352682256920802691257920852437246424101894245524872451194031043267322229066976525345535886088017175675991202106710398471177103610078132034196919321393194918921382220221601977145021512095186913442665262623662050775742648664741757957893722749129012481171102213701259123610722184213320321614211720021605365037853626331636133738354432334374455643343979All figures are based on L10aah life of 20,000 hoursAs EFF1 motors typically run somewhat cooler than standard efficiency motors, the above figures are capable of being increased, subject to theapplication at specific loadings and life. Please refer to Brook Crompton for further details.20

2104E Issue 2.2eWP premium efficiency motorsTechnical information:MechanicalWP-UDF200LXWP-UDF225SWP-UDF225MWP-UDF250MEWP-UDF280SEWP-UDF280MEWP-UDF315SEWP-UDF315MEWP-UDF315MWP-UDF315LWP-UDF355SWP-UDF355MWP-UDF355LMaximum permissible external axial thrust and radial loads in Newtons (N)246846824682468246824682468246824682468246824682468Poles54356058605557816692677064416729753076407293664090129391900765051024110846104006268977410582101367443103051119010797733710077109581034773981019211060106677055100081087210263611812994140381410657791252813148132145595123431293613002Horizontal shaftVertical shaftAll figures are based on L10aah life of 20,000 hoursBSframeLoadtowardsmotorLoadaway frommotor47755398539551216122620058716197699871086761610884188797841359119579101849738573691129920947468499965108501045767439737106181000768049852107201032764619668105329923552411454124981256651851098811608116745001108031139611462500555315457518359415935560660846745667363265837803083117927547289439423897751018014870482575921829990508657565476728419779856648006871583225050750182077587313687999387945523267511752375891734703869807046LoadtowardsmotorLoad awayfrom motor536161216215594171777371704270828099846381167209979410311992773521137712157117117355115341252412077895712719138101341790821304414131135109154128621397113578916413123142291360996921738919143192111005018055195331959910396182821979419860602167816875660177477941761276148631899586487741103881090510521794612039128191237378871219613186127399551130591415013757967613384144711385097481320214311139189758134631456913949102861892920683207511064419595210732113910990198222133421400LoadtowardsmotorLoad awayfrom motor434548714797452353715365503662136213614157945305743677177333487882818761831545697352804275955327795987108317506073328079745850707666837579824456716178677247254272597847791517325971598360491140549854405506Europeanframe51255588553652525963598256486602686868566501626281638477808756929260933693365824913696989216680494431004296306680912197349312688594821006696406603920798019367------------EuropeanframeBSframe512555885536525259635982564866026876685665016262816384778087589796271018297065795884293868919680494431004296306680912197349312688594821006696406606920798019367------------7541754175417541820282028202874589218921892189211134211342113428242171051710517105982517423174231742311342174141741417414113421741417414174141134217414174141741411342174141741417414126272753327533275331262727533275332753312627275332753327533EuropeanframeBSframe7541754175417541820282028202874589218921892189211416614166141668921141661416614166950317348173481734811342174141741417414113422088720887208871134220748207482074811342207482074820748126272753327533275331262727533275332753312627275332753327533Maximum permissible radial load at end of shaftShaft up Shaft down Standard ball bearing Roller bearingTypeWP-DF200LXWP-DF225SWP-DF225MWP-DF250SWP-DF250MWP-DF280SWP-DF280MWP-DF315SWP-DF315MWP-DF315LWP-DF355SWP-DF355MWP-DF355L21

2104E Issue 2.2eWP premium efficiency motorsPerformance data – page notesTypical speed/current curveCurrentI AI ADeltaStarCurrentDelta0I NSpeed0I AI AI N(I A ) Starting current(M A ) Starting torque(M S ) Pull up torque(M K ) Pull out torqueTorque/speed curves for specific motors canbe supplied on request.StarFrames 80-180 Frames 200-355Typical speed/torque curveSpeedDuring the run up period in Star, there mustbe an adequate excess of motor torque overthe load torque. The change to Delta mustnot occur until the motor is near theoperating speed. Refer to Brook Cromptonfor running up against a load in excess of70% full load during Star Delta starting.TorqueM KTorqueM A MS M KDeltaPerformance figures are subject to IECtolerances. Performance figures are based ona 400 volt winding.M AM A0M SDeltaStarSpeedM NM A0StarSpeedM NTo calculate I N on special voltages, multiplythe I N at 400 volts by the following factors:Voltage 220 346 365 420 440 500 550Frames 80-180Frames 200-355Factor1.821.161.10.950.910.800.73Dimensions – page notesFlangeFaceShaftAll dimensions in millimetresDim N Dim N8095 and 110130 and 180 130 and 180230 and 250300350450550680Tolerances toIEC 60072-1Annex C.I.7 Option 1Tol Limitsj6j6j6h6h6h6h6h6h6+0.012–0.007+0.013–0.009+0.014–0.011+0.016–0.013+0.000–0.032+0.000–0.036+0.000–0.040+0.000–0.044+0.000-0.050Dim D19 to 2832 to 4855 to 8085 to 110DBritish andEuropeanTol Limitsj6k6m6m6+0.009–0.004+0.018+0.002+0.030+0.011+0.035+0.013GDFDrain holes are standard on frames 160-355 andon request for frames 80-132Please note that 80 frame motors are onlyavailable as terminal box right or left.Cable entry can be arranged in any one of fourpositions at 90° intervalsNo eyebolts on frame sizes 80 (all poles) and 90(6 and 8 pole)B5 mounted motors have suffix ‘D’ in theframe reference, eg WP-DF132MVX-D and B35mounted motors have suffix ‘H’ in the framereference, eg WP-DF132MVX-HB14 mounted motors have suffix ‘C’ in theframe reference, eg WP-DF132MVX-Cand B3/B14 mounted motors have suffix ‘H’in the frame reference, eg WP-DF132MVX-HTAPPED HOLE DHTO DIN 332Dimensions should not be used for installationpurposes unless specially endorsedG22

2104E Issue 2.2eWP premium efficiency motorsNotes23

Rotating Electrical MachinesBrook CromptonSt Thomas’ Road HuddersfieldWest Yorkshire HD1 3LJ UKTel: +44 (0) 1484 557200Fax: +44 (0) 1484 557201E-mail: csc@brookcrompton.comInternet: www.brookcrompton.comPrinted in Englandgh110/12/02 2104E issue 2.2e© Copyright 2002. Brook Crompton. All rights reserved.