Putting your safety first - Resene

More documents

Recommendations

Info

• Wear a good quality, properly-fitted, toxicdust respirator when dry sanding, makingdust, or burning off lead-based paint. If usinga disposable type, only those with doubleheadstraps are suitable. Respirators shouldmeet the requirements of the NewZealand/Australian Standard NZS/AS 1716-1991 (Respiratory Protective Devices).• Do not smoke while removing paint as thehand to mouth contact may increase the riskof eating or inhaling lead paint dust.Effect of lead on the gardenVegetables and fruit grown in soil contaminatedby lead-based paint are safe to eat as long as theyare carefully washed to remove dust and soil fromthe leaves on the outside of the plant.If safety precautions haven’t been taken, soil maybe contaminated and the top layer may need tobe removed.Further informationIf you need further information on occupational safety and health matters, contact your nearestOccupation Safety and Health Office.If you require information on technical aspects of painting, contact your Resene ColorShop orrepresentative.If you need further information on lead poisoning contact your local Public Health Office and requesta copy of ‘Guidelines for the Management of Lead-Based Paint’ Code 6018. May 1995.10
Methods of removing paintMethodAbrasive blasting.Blasting: An electric paint stripper, hot air bloweror blow torch will heat the paint and blister it, sothat it can be scraped off. Note that the use of ablow torch will produce lead fumes. Beware alsoof fire risk.Chemicals: Usually used for small surfaces such aswindow frames.Dry power sanding with a HEPA VacuumAttachment.Infra-red: Can be used on all timber surfaces.Scraping.Waterblasting: For outside surfaces.Wet sanding. This is preferred to dry sanding toreduce dust.Safety measuresNOT recommended for properties and structuresbuilt or painted before 1970 or for boats because ofthe lead content of the paint and the large amountsof uncontrolled dust generated.Wear a toxic dust respirator if using a hot air blower,blow torch or electric paint stripper. Have a fireextinguisher or water handy in case of fire. If usinga blow torch indoors, make sure that windows areopen and advise local fire authorities.Wear safety glasses, overalls and gloves to avoidcontact with the skin. Keep the room well ventilated.Follow any instructions on the label.This method is not recommended for a DIYer. Itrequires skill and can only be done safely bycontractors with the appropriate training andexperience.This method is recommended where lead-basedpaint is present because of the low operatingtemperature. Ensure work area is well ventilated ifworking in a confined space. No dust is created.Sweep up paint debris and dispose of.Ensure any debris is collected and the area cleaned up.Clean up paint flakes. Use water to flush debris toa collection point for disposal. Prevent debrisspreading to other properties.Reduce dust by wetting paint before rubbing downwith wet and dry sandpaper. Do not rub down withdry sandpaper and especially not with an ordinarypower sander. This will release lead-rich dust intothe air and the rest of the house. Ensure that anyresidue is cleaned up.11
Page 1 and 2: PuttingyoursafetyfirstUnderstanding
Page 3 and 4: Surface coatingsWhat are paints mad
Page 5 and 6: Organic solventsUnder the Health an
Page 7 and 8: InhalationTo help a victim of over-
Page 9 and 10: What if there is a fire?When paints
Page 11: • If your child has more severe s
Page 15 and 16: 5. Lack of oxygen and confinedspace
Page 17 and 18: Protecting your eyesCauses of eye i
Page 19 and 20: Polyurethanes and lacquersPolyureth
Page 21 and 22: Personal hygieneThis is important i
Page 23 and 24: Donate:Donate to charityIf you just
Page 25 and 26: The Resene checklist - part twoBe P

Putting your safety first - Resene

Create successful ePaper yourself

Delete template?

Save as template?