uBR7111 - Multicom

DescriptionSpecificationOut-of-band noise performance: < –12 dBmV/–30 dBmV/6 MHz and 8 MHzDigital slope compensation to achieve < ±0.3 dB slope over any channelExcellent in-band noise performanceRF output mutes when changing output configurationHigh-reliability, state-of-the-art design using monolithic microwave integrated circuit (MMIC)and surface mount technologyConservative component derating and 100% burn-in to help ensure reliable operationLow power consumptionAll local oscillators are frequency synthesized and locked to a common internal highstabilityreferenceNote: Also see "Downstream Cable Physical Layer" and "Upstream Cable Physical Layer"specification sectionsPort adapters (WAN or backbone interfaces)Included AC power supplyCompact design:Suitable for rack-mount (2-rack unit) or desktopinstallationEmbedded dual 10/100BASE-T Ethernet (TX FE) providedSupports one additional port adapter; options include:Ethernet—PA-FE-TX, PA-FE-TX, PA-FE-FX, PA-4ESerial—PA-4T, PA-4T+Single; 100 to 240 VAC input voltageOutput 20W50 to 60 Hz frequency0.80 to 0.95 power factor525W (maximum) input AC powerAC-input cable: 18-QEG4 3-wire cable with a 3-lead IEC-320 receptacle on the powersupply end and country-dependent plug on power source endDimensions of 17.5 x 18.25 x 3.5 in. (44.45 x 46.36 x 8.89 cm) (H x W x D)32 lb (14.5 kg)All contents are Copyright © 1992–2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.Available at Multicom, Inc.www.multicominc.com • 800-423-2594