Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.PLASTER WORK:A Providing 6mm thick cement plaster over Brickwork or concrete surface in Sqmt. 1024.175cement mortar 1:3, including all necessary scaffolding, watering, curing etc.complete at all floors and heights as directed by Architect/Engg in charge.B Providing and applying 20mm (two coats 12mm & 8 mm ) water proof cement Sqmt. 361.528plaster to brick masonry / concrete surface at all heights and depths using CM1:4 (1 part of cement : 2 parts of fine sand & 2parts of coarse sand) cementmortar including scaffolding, curing etc. complete including groove bends, dripmolder wherever required as specified and directed by site engineer. NOTE : Therate should also include the cost of water proof components and mixing withmortar etc as per manufacturer's specifications complete.E Providing and fixing 24 gauge GI wire chicken mesh of 200 mm width on SqMt. 2629.2Junction of RCC and brick masonry before laying plaster including providingand fixing nails, making drill holes and repairing the same etc. complete at allheights and leads as per drawing and as directed by Engineer.PAINTING WORK:A Providing and applying Readymade Acralic wall putty in two or more coats to SqMt. 24500give even finish to the satisfaction of EIC/Architect of approved makeAsian/equivalent approved i/c sand papering for making the surface smooth forapplying any paint and final coat with ready made approved branded putty.B Providing and applying POP punning with minimum thickness of 10 mm in SqMt. 4510perfect line and level in both directions with first quality POP at any level andheight to wall surface, concrete surface, ceiling, grooves, chamfer. cleaning, etc.complete and as required and directed.B-1 Providing and applying ICI/approved equivalent as pen Architect specifications SqMt. 4510make "luster* paint on walls, other surfaces by scraping surface then applying'Patti" three times to make the surface perfectly leveled and smooth thenapplying roller finish three coats of paint of specified colours and shape,cleaning, etc complete.C Providing and applying Plastic Emulsion paint of two or more coats with SqMt. 5120approved quality paint of "DULUX" /approved equivalent make & shade overtwo coats of primer including preparation of surfaces with sand papering,stopping all holes and depressions as per specifications, scaffolding, primer,curing etc complete for all heights and as directed by site engineer. Note : Noextra payment shall be made for the roughness of the plastered surface.Page 50 of 92