Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.WOODEN & STEEL DOORS:A Providing and fixing in position door frames Single rebate frame size 80 x 50mm made up of cold rolled framed profiles of pressed steel. as manufactured byDewas Techno product PA Ltd.., Dewas, (MPYor Ws Tube Investment of IndiaLtd., made from commercial MS sheets of 1.25 mm thick conforming to IS 5131973 and as per general specifications of IS 4351 1976 including 12 mm dia MSbar steel base ties to hold in position and holdfasts of 300 mm long of 35 x4mmMS flats fitted to the frame and embedded in masonry with PCC 1:2:4 etccomplete including a shop coat of red oxide paint on all the surface of the frameand two coats of synthetic enamel paint on all the exposed faces complete asdirected by Architect/ Engineer-in‐Charge (Rate to include filling the hollowsides of the frame wifth PCC 1:2:4 with 6 mm and down gauge stone grit,provision for lock style plate, shock absorbers, rubber buffer arrangement holesfor fixing the door bolt, Aldrop, other accessories, and welding the MS butthinges (cost of butt hinges included In relevant shutter items)Rmt. 40BCSupplying and fixing In position approved quality 18 SWG steel rolling shutter, Sqmt 12with mechanical device (gear arrangement for noiseless and smooth operation)for push and pull , consisting of shutter (constructed with interlocking lathesections formed out of cold. rolled steel strips 0.9mm thick, 80mm wide and1.25 mm thick, 80mm wide for shutter width up to 3.5M and above 3.5Mrespectively 3.15 mm thick joint less MS Channel guide, MS sheet hood cover(0.9mm and 1.25mm thick respectively for shutter width up to 3.5M and above3.5M), MS girders, pressed bottom rails, shutter suspension steel shaft withpulley and cage top rolling springs, locking arrangement etc. including paintingwith two coat of approved quality red oxide and two coats of synthetic enamelpaint of approved make and shade and fixing to masonry / RCC as directedmaking good of any damage work etc all complete as per specifications,directions of Engineer In charge and conforming to IS 62-48 (Measurement forpayment shall be the area of opening size clear).Providing and fixing in position 35mm thick single or double leaf solid core type Sqmt. 6flush door shutters (Indian Manufacturing Co. Ltd., Indian Ply Wood company,M/s Mysore Commercial Ltd., or approved equivalent) with solid block boardcore internally lipped with well seasoned commercial hard wood timber, bondedwith water proof, phenol formaldehyde synthetic resin hot pressed confirming toI.S. 2202‐1973, with both side teak veneered with vertical grains or cross bandsincluding malamine polish in two or more coats on both the side.Size: 1000 x 2100 Single Shutter (900x2l 00)Page 48 of 92