Final Sec. 7 BOQ-Crystal IT Park Balance Work - Madhya Pradesh ...

Sn. Particulars Unit Qty.D Providing pocket of any depth upto 900-1300 MM in concrete for machine Sqm 30foundation. (surface area shall be measured) including Grouting of pockets withcement concrete 1:2:4/1:1.5:3 including finishing good (53 grade cement ofapproved make).E DeletedF DeletedG Extra for mixing of water proofing materiai in concrete Pe in proportionrecommended by manufacturers.Per bag 1496.5(50 kgs ofcement)H Extra for shuttering for exposed concrete surface by using BWP ply and wooden Sq.M 300batten for impression on RCC surface.J Providing and fixing in position bar grips splicing by hydraulic pressingmechanical splice joint manufactured by Usha Martin Industries or equivalentand fixed as per Manufacturees instructions including mobilisation, necessarytransportation of machine etc complete as specified by site incharge.a 20mm dia Nos 204b 25 mm dia Nos 174c 28 mm dia Nos 200d 32 mm dia Nos 84K Supplying, fabricating and erecting in position bolted or welded M.S. Rolled MT 10.945sections such as round/square bars, flats, angles, at all levels and locations.forrailing, architectural design elements, grill work,ladders/ stair case including allfittings, including straightening, cutting, welding, bending painting with twocoats of zinc phosphate primer and two coats of enamel paint of approved makeand shade etc all complete as specified and directed.the rates includes fixing inRCC/Brick work, including all material & labour complete.L Providing, fabricating & fixing insert plate in concrete or masonry members as MT 1.437per drawing in line & level including necessary consumables & labour completeall respects and as directed by Site Engineer.M Providing and fixing PVC pipe sleves of approved class of approved makeincluding allfittings like bend, tees union, reducer necessuary jointing etc. inconcrete, flooring or masonry as per drawing in line & level, including necessaryconsurnables & labour. at all depths / heights closing the ends, complete in allrespects and as directed by Site Engineer.a)25 MY. DIA RMT 20b)40 MM DIA RMT 40c) 50 MM DIA RMT 40d)75MM DIA RMT 70e) 100 MM DIA RMT 70Page 46 of 92